pwarren/zmk_mf68
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
1823 commits 1 branch 0 tags 16 MiB
Commit graph

936 commits

Author SHA1 Message Date
Nick Winans
0b44321613 fix(shields): Fix typo on Quefrency .zmk.yml 2021-11-29 00:52:57 -05:00
Peter Johanson
54dabffd0d feat(behaviors): Add caps word (&caps_word). 
* Add new `&caps_word` behavior that acts like caps lock, but
  releases automatically when any "break" keycode is pressed.
 2021-11-28 22:41:35 -05:00
Jonathan Rascher
30ed237533 test(conditional-layers): Add tests for edge cases 2021-11-15 05:49:23 -05:00
Jonathan Rascher
6cd1734851 test(conditional-layers): Add interleaved up/downs 2021-11-15 05:49:23 -05:00
Jonathan Rascher
a908396013 test(conditional-layers): Add multi-config tests 2021-11-15 05:49:23 -05:00
Jonathan Rascher
df110beac4 test(conditional-layers): Add basic unit tests 2021-11-15 05:49:23 -05:00
Jonathan Rascher
e9140b2da9 feat(conditional-layers): Implement feature 
This is a generalization of the existing concept of tri-layer support
that's already well known. Essentially, a conditional-layer
configuration activates a particular layer (the then-layer) when one or
more other layers (the if-layers) are activated.

This is commonly used on ortho keyboards to activate a third "adjust"
layer while the primary two layers ("lower" and "raise") are active.
 2021-11-15 05:49:23 -05:00
Peter Johanson
f8018b22d0 fix(hid): Basic consumer code fixes for signed logical max. 
* Logical max values are signed, so for the report descriptor, use a two
  byte logical max descriptor item to impart proper 0xFF max logical
  value.
 2021-11-09 10:38:49 -05:00
Viet (Drake) Tran
c412fad40d
fix(shields): Fix some keycodes in reviung41 keymap 
Notice some keycodes are not matched with the expected keys.
 2021-11-09 10:26:21 -05:00
jding
4e62319982 feat: hold/tap flavor tap-unless-interrupted 
Implements new hold/tap flavor, tap-unless-interrupted
Adds tests
Adds docs
 2021-11-09 01:07:05 -05:00
Hai-Ninh Dang
f2e0642291
feat(boards): Add Mikoto board 
* Supports selecting from several possible charge currents

Co-authored-by: Pete Johanson <peter@peterjohanson.com>
 2021-11-09 00:57:24 -05:00
Peter Johanson
0b0b49d626 fix(split): Properly rediscover peripherals. 
* Handle disconnects of peripherals, and properly clean up
  and resume discovering for when the peripheral re-appears.
 2021-11-04 22:31:56 -04:00
jmding8
73fd4b9230
fix(behavior): Properly break in decision switch statement. 
Co-authored-by: jding <jding@roblox.com>
 2021-11-01 13:51:12 -04:00
jmding8
19ee7849f8
feat(behaviors) Required keys for tap-hold behaviors 
* Add optional `hold-trigger-key-positions` hold-tap configuration
* Leverage configuration for decision making around when to trigger
  hold decision in hold-taps.
* Add docs for new configuration.
* Tests for the new config/decision logic.
 2021-11-01 12:37:20 -04:00
Joel Spadin
f946dc6893 feat(kscan): Improve matrix debouncing 
Switched the GPIO matrix driver to debouncing using a simple integrator
algorithm. Whenever a key is pressed, we now scan at a rate controlled
by debounce-scan-period-ms (default 1 ms) until all keys are released,
then return to either waiting for an interrupt or polling more slowly.

The timers for key press and release can now be controlled separately,
so debounce-period is deprecated in favor of debounce-press-ms and
debounce-release-ms. Global Kconfig options
ZMK_KSCAN_DEBOUNCE_PRESS_MS and ZMK_KSCAN_DEBOUNCE_RELEASE_MS are also
added to make these easier to set.

Added documentation for debouncing options.
 2021-10-26 23:52:13 -04:00
Jonathan Rascher
e3eb77dfc6 refactor(combos): Use ZMK_KEYMAP_EXTRACT_BINDING 
Now that PR #506 is merged, we can address this TODO.
 2021-10-20 23:36:31 -04:00
Peter Johanson
e6c815f1b0 fix: Properly find boards in user config repos. 2021-10-19 13:29:36 +00:00
Peter Johanson
0dc7d46eb1 fix: Only search for board one not found yet. 2021-10-18 20:08:35 -04:00
Peter Johanson
742f4c2826 fix(keymaps): Properly locate split board keymaps. 
* Find the unified keymap filename for onboard controller split
  keyboards.
 2021-10-18 20:08:35 -04:00
eyenseo
6f29453041 [squash] implement feedback 2021-10-13 09:51:02 -07:00
eyenseo
51298f1d22 Add ergodash 2021-10-13 09:51:02 -07:00
Richard Kjerstadius
a774ce8555 fix(display): Increase char buffer size to fit all symbols 
Recent refactoring of the font handling seems to have broken the display
of the last symbol of the output status widget. From my analysis the
last symbol is truncated because the buffer simply is too small.
Increasing the buffer size to 9 fits all three possible symbols.
 2021-10-12 12:00:21 -04:00
git@jrhrsmit.nl
f221ff1dc7 add ranges and descriptions from #669 2021-10-11 09:46:17 -07:00
Nick Winans
f23f427cae fix(underglow): Run clang-format 2021-10-10 17:43:57 -07:00
Simon Malinge
c5b8dd85fd feat(underglow): Add support for configurable min/max brightness 
Co-authored-by: jrhrsmit <jasper.770@gmail.com>
 2021-10-10 17:43:57 -07:00
Peter Johanson
bc179b1030 feat(hid): Kconfig for basic/full consumer usages. 
* Add ZMK_HID_CONSUMER_REPORT_USAGES choice to allow choosing
  between full consumer usage range, with poor OS compat,
  or basic consumer usage range, with broader compat.
 2021-10-04 23:01:39 -04:00
Pete Johanson
91ba034896 feat(hid): Configurable NKRO HID report support. 
* Add Kconfig settings for NKRO or HKRO (boot compatible), HID
  report types for keyboard page.
* Updated report storage and set/unset for each config.
 2021-10-04 23:01:39 -04:00
Aleblazer
063b496c26
feat(boards): Add Zodiark shield 2021-10-03 23:47:23 -04:00
Brandon Xie
3b8244e466
feat(shields): Add Naked60BMP shield 2021-10-03 23:23:54 -04:00
Nick Winans
687e91ab18 feat(boards): Remove usage of pro_micro_a/d nodes 2021-09-25 23:09:21 -04:00
Nick Winans
4a03214e06 feat(boards): Add D18-21 to Pro Micro pin mappings 2021-09-25 23:09:21 -04:00
Peter Johanson
014e5ba93c refactor(boards): Remove leftover right split name 2021-09-26 01:21:49 +00:00
Nick Winans
478cf94374 refactor(boards): Remove "left" from split keyboard names 2021-09-25 21:17:24 -04:00
Nick Winans
36ced48e53 refactor(boards): Remove split right keyboard names 2021-09-25 21:17:24 -04:00
Peter Johanson
3e6a3758ed refactor(display): Saner font selection/defaults. 
* Only select fonts for the default built in status screen
* Leverage theme default fonts, instead of hardcoding theme
  details in each component.
 2021-09-25 19:43:20 -04:00
Peter Johanson
2128b2b55f refactor(display): Output/layer/battery thread safety. 
* Submit widget updates to display queue.
* Use mutex to control access to shared state for widgets.
 2021-09-25 17:17:04 -04:00
Peter Johanson
063d98e3df feat(display): Optional dedicated work queue. 
* Add new Kconfig settingsx to allow selecting system or dedicated
  work queue for performing UI updates.
* Allow UI updates to not block other system tasks when display is
  updating, especially important for e-ink displays.
 2021-09-25 17:17:04 -04:00
Xudong Zheng
212a05feb3 fix(hog): use OR instead of AND for bitmap 2021-09-23 20:47:40 -04:00
Dom H
db4bbbf9eb fix(shield): Update URL in A. Dux metadata 2021-09-23 14:57:40 -04:00
Dom H
80b01c7265 refactor(shield): "Architeuthis Dux" to "A. Dux" 
The shorter name is more user-friendly.
 2021-09-23 14:57:40 -04:00
Dom H
0c15c2291e feat(shield): Add Architeuthis Dux shield 2021-09-23 14:57:40 -04:00
Peter Johanson
a7908a94de fix(hog): encrypt perm for HID report map/ref. 
* Workaround for ensuring macOS pairing happens early enough,
  for their stack, we require encryption for the hids report map and
  report ref characteristics as well, to trigger pairing ealier in the
  connection process for macOS.
 2021-09-18 15:43:26 -04:00
Pete Johanson
c9a671d8d5 fix(kscan): Allow composite driver to handle missing children. 
For split keyboards using an IO expander over TRRS/i2c, if the
right half isn't connected, we should be able to gracefully
fallback to the left side still working.
 2021-09-14 20:48:28 -04:00
Peter Johanson
e42590a049 feat(board): Add Ferris 0.2 boards 
* Onboard stm32f072 with mcp23018 IO expander.
* No underglow support yet.
* Miryoku inspired default layout.
 2021-09-14 20:48:28 -04:00
Pete Johanson
647110e5e5 feat(drivers): Add mcp23017 driver based on upstream mcp23s17 one. 
* Upstream Zephyr has in progress driver, so doing this locally here,
  until we can move over to that driver.
 2021-09-14 20:48:28 -04:00
Peter Johanson
c7e513634d feat(metadata): Add YAML check/format npm scripts. 2021-09-11 00:50:36 -04:00
Peter Johanson
39eb80562d feat(metadata): Add MakerDiary nRF52840 M.2 interconnect 
* Add interconnect details.
* Add m60 and nrf52840_m2 metadata files.
 2021-09-11 00:50:36 -04:00
Peter Johanson
0c3f1309c6 refactor(boards): Add metadata for boards. 
* Standalone and pro-micro format board metadata added.
 2021-09-11 00:50:36 -04:00
Peter Johanson
2907704f9f refactor(shields): Add pro-micro shield metadata. 2021-09-11 00:50:36 -04:00
Peter Johanson
b52835ffbf feat: Add a few sample hardware metadata files. 2021-09-11 00:50:36 -04:00
Peter Johanson
1d69bdda60 feat: Add hardware metadata schema. 
* Initial hardware metadata JSON schema.
* GH Action to validate all schemas for boards/shields.
 2021-09-11 00:50:36 -04:00
Dom H
4a5454b0f9 fix(shields): Add note about Cradio pin arrangement 2021-09-08 15:12:58 -04:00
Joel Spadin
82cb762698 refactor(kscan): Demacroify GPIO matrix driver 
Refactored the GPIO matrix kscan driver so that only the data and config
structures are defined in the foreach macro. Functionality is unchanged
except for the addition of DT properties to adjust polling speed.

This should make it easier to add other enhancements later, like
improved and customizable debounce behavior.
 2021-09-08 14:34:28 -04:00
Peter Johanson
e491c282e7 fix(display): Add proper LVGL label dep. 2021-08-27 23:06:28 -04:00
Darryldh
a124eb9f9e feat(display): IL0323 driver for EPD displays. 
* Basic driver, using the GD7965 driver as a basis, since the ICs
  are very similar.
 2021-08-24 22:15:42 -04:00
Martin Aumüller
08078210da fix: Planck rev 6.1 
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
 2021-08-24 21:21:18 -04:00
Peter Johanson
08687b1709 fix(display): Update output status on endpoint selection change. 2021-08-03 00:19:05 -04:00
Peter Johanson
d05d7ec2d2 feat(endpoints): Add endpoint select changed event. 2021-08-03 00:19:05 -04:00
Peter Johanson
9d34cf561e fix(usb): USB state changes in system thhread. 
* Use a `k_work` to send usb status events from the system
  workqueue thread, not the USB work thread.
 2021-08-03 00:19:05 -04:00
Nick Winans
cf5c56c4f1 feat(boards): Use the nRF VDDH driver for the nice!nano v2 2021-08-02 21:56:53 -04:00
Nick Winans
1cafbd8069 fix(power): Manually trigger pm_low_power_devices() before sleep 2021-08-02 21:48:42 -04:00
Nick Winans
2b9deb824b feat(power): Update device power management Kconfig 2021-08-02 21:48:42 -04:00
Devon Allie
f31ffd8acb
fix(shields): Clean up default corne keymap. 2021-08-02 19:12:11 -04:00
Joel Spadin
a6de43e665 feat: Add nrf VDDH battery driver 
Added a driver which uses the nRF52's ADC channel on the VDDH pin to
read the battery voltage when using high voltage mode.
 2021-07-24 23:39:13 -05:00
Peter Johanson
65ff995033 fix(display): Avoid fault w/ LVGL API usage. 
* Increment the tick from within the ISR itself.
* Don't call task handler until in the display callback.

PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
Peter Johanson
b2d64fe598 refactor(boards): Switch proton_c to newer pinmux approach. 
See: https://github.com/zephyrproject-rtos/zephyr/issues/28999
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
Pete Johanson
d7475f792f fix(boards): Enable pinmux for bdn9_rev2 by default. 
See: https://github.com/zephyrproject-rtos/zephyr/issues/28999
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
Pete Johanson
6c23bb5c11 fix(tests): Revert default to previous formatter. 
* new cbprintf formatter causes issues for our use of string formatting.

See: https://github.com/zephyrproject-rtos/zephyr/pull/29876
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
Pete Johanson
2a69f31eb0 refactor(core): Move away from deprecated DT API. 
* Move to `DEVICE_DT_INST_DEFINE` everywhere.

See: https://docs.zephyrproject.org/2.5.0/releases/release-notes-2.5.html#deprecated-in-this-release
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
innovaker
ad981c3bbd refactor(core): update power API to Zephyr v2.5.0 
See: https://github.com/zephyrproject-rtos/zephyr/pull/29410
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
innovaker
71a85a0c8e feat: bump zephyr to v2.5.0+zmk-fixes 
PR: https://github.com/zmkfirmware/zmk/pull/736
 2021-07-17 17:04:25 -04:00
Nick Winans
edb3ff1bb1 feat(boards): Add nice!nano v2 2021-07-15 18:52:28 -04:00
Okke Formsma
efa497c69b fix(behaviors): Fix timing of delayed hold-tap trigger 
A hold-tap timer event would be triggered too soon if the hold-tap
was delayed for longer than its tapping-term. This may cause
accidental hold behavior when the correct behavior would be tap.

By queuing the timer event instead of executing it immediately,
other delayed events get a chance to be processed properly.
 2021-06-13 10:44:18 -04:00
David Barr
0f28130493
fix(shields): Cradio v2 keymap/shield improvements 
* fix cradio dtsi add new keymap and readme

Co-authored-by: Dom H <dom@hxy.io>
 2021-06-10 16:50:13 -04:00
Alexander Krikun
e8b42221cf
fix(shields): added right alt and layer quick tap to Jian 2021-06-08 21:09:22 -04:00
Jay Greco
f3bb90f9e1
fix(kscan): Fix nibble demux scan errors on encoder row 
+ Add a 1us sleep to let the column selection settle in order to avoid spurious keypresses when row capacitance is high (like on the encoder row)
 2021-06-08 20:59:35 -04:00
Dom H
4c1a71551b feat(keys): Add LSHIFT and RSHIFT aliases 
Using LSHIFT or RSHIFT instead of LSHFT or RSHFT was a common error.
 2021-06-08 20:57:40 -04:00
Jonathan Rascher
4e69a32103 fix(combos): Check each combo key, not just last 
The current combo completion check only makes sure the last key in the
combo is set. This works when the combo is typed correctly initially, or
when reraising events in a combo of length two. However, it fails for
longer combos since the last event in pressed_keys might be set, but the
first (or subsequent) event in pressed_keys can be NULL thanks to
release_pressed_keys.

Also added a regression test.
 2021-06-08 20:35:58 -04:00
Jonathan Rascher
eecc12c980 test(combo): Add unit test for complete long combo 2021-06-08 20:35:58 -04:00
Jonathan Rascher
bba1599824 refactor(combos): Rename existing long combo test 
This test doesn't test a long combo that completes, but rather one
that's incomplete (so the combo doesn't trigger). Renaming to avoid
confusion when we add more long combo tests.
 2021-06-08 20:35:58 -04:00
Joel Spadin
0a9efbf85d fix(ble): Ignore out of range profiles 
Don't allow selecting a BLE profile that is out of range to avoid
reading/writing past the end of the profiles array.
 2021-06-08 20:33:43 -04:00
Nick Winans
efcc49f23d
fix(boards): Set nice!60 nRF subfamily for openocd (#816) 2021-06-04 00:33:44 -04:00
Anthony Amanse
719b6aa0ae
fix(boards): Add delay on initializing external power for BlueMicro840 
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.

Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
 2021-05-31 00:44:30 -04:00
Anthony Amanse
cdbfb35662
fix(boards): Fix Blue LED pin definition in BlueMicro840 
This commit fixes the pin definition for BlueMicro840. Based on the
schematics, the blue led is at pin 1.10.

Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
 2021-05-31 00:20:46 -04:00
Nick Winans
3f838f0aaf feat(boards): Add nice!60 board 2021-05-30 11:47:20 -04:00
Okke Formsma
a32cd668d6
fix(tests): Use debug builds and high resolution timer 
By setting CONFIG_DEBUG, the native_posix builds will not be optimized
which makes debugging them much nicer.

By setting CONFIG_SYS_CLOCK_TICKS_PER_SEC to 1000, debug prints have a
higher resolution and not always show up as multiples of 10ms.
 2021-05-27 08:20:45 -04:00
Okke Formsma
de4979bf58 fix(behaviors): Fix sticky keys quick-release for normal keypresses 
Quick release for sticky keys failed for non-layer keys. The sticky key
was released just before the key that was supposed to be modified was
handled.

The issue was caused by an error in the sticky key logic, which released
the sticky key before handling the key up event.

Fixes #696.
 2021-05-09 07:52:41 -04:00
Peter Johanson
977746dbde feat(tests): Override test parallelism w/ J=8 environment. 2021-05-05 00:56:05 -04:00
Lucas Messenger
d8119cd663
fix(boards): Proper BlueMicro840_V1 &pro_micro_a map for A10 (#733) 2021-03-24 13:21:40 -04:00
Pete Johanson
28d454655b fix(boards): Move board endif to proper location. 
* Nibble and tidbit conditional was closed early, enabling
  some settings incorrectly for other unrelated builds.
 2021-03-18 21:26:41 -04:00
Pete Johanson
27c89e69c1 fix(kscan): Proper direct wire warning message. 2021-03-15 00:39:29 -04:00
Okke Formsma
0df7110058 fix(combos): Fix stuck keys when pressing long combos. 
To properly retrigger hold-taps when a combo is not activated, some
position down events are reraised instead of released. The corresponding
position up events were never reraised, causing a potential stuck key.
 2021-03-11 16:23:45 -05:00
Okke Formsma
8ebe0cd0c8 refactor(core): make the event manager a bit easier to read 2021-03-10 20:12:23 -05:00
Okke Formsma
c01243d1c6 fix(logging): remove unnecessary newline 2021-03-10 18:08:22 -05:00
JP Bonn
c643f1cd96 added battery.h, last_state_of_charge to uint8_t 2021-03-10 18:07:18 -05:00
JP Bonn
b8a8ecd59d fixed order of setting state_of_charge 2021-03-10 18:07:18 -05:00
JP Bonn
df4ec51f96 only send zmk_battery_state_changed on change 2021-03-10 18:07:18 -05:00
Pete Johanson
0f9fff7554 Fix the label for the GPIO kscan driver. 2021-02-27 14:32:42 -05:00
Okke Formsma
32008825fe fix(behaviors): Add missing hold-tap trigger 
A hold-tap trigger was missing in the scenario where a hold-tap behavior
was queued for a while and it's timer should've run out.
 2021-02-27 09:20:20 -05:00
Okke Formsma
0c1940bb79 feature(hold-tap): no-hold-flash for retro taps 
This is an improvement on retro-tap, solving the 'flashing hold' issue
users people experience.

When the tapping-term expires, the hold key is normally pressed. When
retro-tap is enabled, this is undesirable; only an interrupted hold-tap
should trigger the hold behavior.

This change disables the hold behavior for the 'STATUS_HOLD_TIMER'
state when retro-tap is enabled, and makes sure the
'STATUS_HOLD_INTERRUPT' state will be triggered when appropriate.
 2021-02-24 07:24:27 -05:00
Okke Formsma
89ed816c67 feature(hold-tap): Retro tapping 2021-02-24 07:24:27 -05:00
Okke Formsma
62ae157c0b refactor(hold-tap): improve switch statements 2021-02-24 07:24:27 -05:00
Okke Formsma
9c4c266b17 refactor(hold-tap): pretty print decision_moment 2021-02-24 07:24:27 -05:00
Okke Formsma
0ebf440de8 refactor(hold-tap): create press_binding and release_binding functions 2021-02-24 07:24:27 -05:00
Okke Formsma
abc60fc7cb refactor(hold-tap): split hold state into interrupt and timer 2021-02-24 07:24:27 -05:00
Okke Formsma
200c6cabea refactor(hold-tap): use enum for hold-tap status 2021-02-24 07:24:27 -05:00
Okke Formsma
6b7026cdd1 refactor(hold-tap): simplify flavor enum 2021-02-24 07:24:27 -05:00
Nick Winans
57661362ea refactor(ext-power): Add init-delay-ms option 
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
 2021-02-16 14:51:32 -05:00
Nick Winans
b43fb8502e fix(ext-power): Initialize as soon as settings are available 2021-02-16 14:51:32 -05:00
Pete Johanson
ff7891c097 fix(display): Check for display in idle handler. 
* Closes #679
 2021-02-16 14:21:46 -05:00
Okke Formsma
af9d6e9b05 style(hold-tap)!: Write hold-tap params with dashes 
tapping_term_ms -> tapping-term-ms
quick_tap_ms -> quick-tap-ms

The old style works, although it's deprecated.
 2021-02-10 07:55:12 -05:00
Pete Johanson
2af794eed3 feat(underglow): Convert HSB changes to absolute. 
* Public type for HSB led color.
* New API for calculating "next" HSB based on current
  state.
* Update behavior to convert the increment/decrement
  commands to absolute command as well.
 2021-02-09 01:27:50 -05:00
Pete Johanson
e6f168d6df refactor(behaviors): Convert state dependent params. 
* Allow each behavior to map a relative binding, e.g. "toggle",
  to an absolute one, e.g. "on", before being invoked.
 2021-02-09 01:27:50 -05:00
Pete Johanson
bb2c478af9 refactor(rgb): Expose explicit on/off command/API. 2021-02-09 01:27:50 -05:00
Nick Winans
fc5d7bcb78 fix(boards): Remove explicit enable of sensor 2021-02-08 10:50:44 -05:00
Nick Winans
5eace0bbc4 fix(core): Enable sensor by default 2021-02-08 10:50:44 -05:00
KemoNine
0499e7e8ac
Refactor nibble / update to match build docs (#620) 
* feat(nibble): add underglow support for nice_nano builds

* feat(nibble): add encoder to top, left most column to match standard assembly documentation

* refactor(nibble): add layer labels

* feat(nibble): add support for optional display ; off by default

* feat(nibble): add README

* fix(nibble): adjust oled rotation for easier reading

* fix(nibble): add additional note about enabling oled

* refactor(nibble): convert keymap to use tabs instead of spaces

* refactor(nibble): enable oled in dts/overlay by default

* refactor(nibble): cleanup alignment and formatting in nibble keymap

* refactor(nibble): re-align top most row of keymap to be sensible

* refactor(nibble): cleanup kscan map alignment

* refactor(nibble): indent first row of map/transform to properly align with physical columns

* fix(nibble): remove dangling code block from readme

Co-authored-by: KemoNine <mcrosson@kemonine.info>
 2021-02-04 10:28:02 -06:00
jrhrsmit
e40ca1eb7c
fix(power): Add support for capacitors on ADC for BVD 
Add a little delay so any capacitors connected to the ADC for the BVD can charge up when using power_gpios

Co-authored-by: Jasper Smit <jrhrsmit@gmail.com>
 2021-02-04 07:56:27 -05:00
Pete Johanson
b84d29c384 refactor(core): Use /omit-if-no-ref/ for behaviors. 
* Use lesser-known DT features to skip behaviors not referenced
  in the user keymap
* Update the behaviors to skip code if no nodes found.
* Remove some empty config/data structs where unused in
  behaviors.
 2021-02-04 00:52:25 -05:00
mantas
b4d63fb52c feat(shields) Add encoder support to CRBN 
Pin A maps to A2 (F5), pin B to A3 (F4).
Added keymappings to encoder on default and lower layers.
 2021-02-03 23:49:59 -05:00
mantas
c94943da1c style(crbn): Unify indentation from spaces to tabs 2021-02-03 23:49:59 -05:00
KemoNine
cd503ed17b
Feat combo layers (#661) 
feat(combos): add layer filtering

Co-authored-by: KemoNine <mcrosson@kemonine.info>
 2021-02-03 23:33:09 -05:00
Okke Formsma
9a7908b632 behaviors(hold-tap): Implement quick_tap_ms (TAPPING_FORCE_HOLD) 
Tap-and-hold a hold-tap to hold the tap behavior so it can repeat.
After a tap, if the same key is pressed within `quick_tap_ms`, the
tap behavior is always picked.

This is useful for things like `&ht LSHFT BACKSPACE` where holding
the backspace is required.

Implements #288.
 2021-02-02 15:28:16 -05:00
Pete Johanson
6c7ab0ce53 refactor(kscan): Fix polling of GPIO matrices. 
* Add easier macros for conditional polling/interrupt code.
* Properly continue polling on intervals, without extra
  enable/disable code for pins that is superfluous when not trying to
  deal with interupts firing.
* Fix to allow multiple GPIO drivers when doing splits w/ IO expanders
 2021-02-02 14:04:10 -05:00
Pete Johanson
2f352788c1 refactor(kscan): Remove explicit default n from kscan configs. 
* Actually allow defaulting yes in other places.
 2021-02-02 14:04:10 -05:00
Nick Winans
33cd2caced fix(boards): Shorten keyboard names that are too long 2021-02-02 00:59:17 -05:00
Nick Winans
82173f354e fix(core): Assert BLE device name is correct length 2021-02-02 00:59:17 -05:00
Okke Formsma
4e20bf5de1 refactor(behaviors): simplify hold-taps by not using _TRANSFORM_ENTRY 2021-02-02 00:43:26 -05:00
Okke Formsma
84d19fe79b refactor(behaviors): factor out multiple uses of _TRANSFORM_ENTRY 2021-02-02 00:43:26 -05:00
Jeff Rizzo
4f040fecdf Add a missing log_strdup() 2021-01-30 00:31:07 -05:00
Okke Formsma
c925cf02dd feature(sticky_keys): add quick-release 
when quick-release is enabled, the sticky key is released immediately after another key is pressed
 2021-01-28 17:10:04 -05:00
Pete Johanson
7c24ab069c fix(behaviors): Updated grsec snapshots for new log format. 2021-01-25 16:11:01 -05:00
Okke Formsma
7b7701ae90 feature(modifiers): add explicit modifiers 
this makes LS(LEFT_CONTROL) work as if shift and control were both
pressed explicitly. Previously, the left shift would have been released
as soon as another key was pressed. The implicit behavior is useful in
case of LS(NUMBER_1) when rolling over to other keys.

Also see #361.
 2021-01-24 23:30:41 -05:00
Okke Formsma
0c30b49063 refactor(modifiers): define is_mods function 2021-01-24 23:30:41 -05:00
Okke Formsma
df4a5c8613 refactor(hid_listener): pass event struct instead of parameters 2021-01-24 23:30:41 -05:00
Ally Parker
a4aaa73f06 feat: Add WPM calculator and display widget 2021-01-23 18:38:31 -05:00
Jeff Rizzo
c0cab57c2d run-test.sh: use the POSIX '-L 1' for xargs 
This allows tests to be run on platforms where '-l'
isn't implemented, like MacOS.
 2021-01-23 18:32:18 -05:00
Okke Formsma
5eeb310b2f feat(grave-escape): implement grave-escape 
closes #85
 2021-01-22 19:27:18 -05:00
Jay Greco
58ad5d4e86 Fix offset in NIBBLE transformation and keymap 
The NIBBLE transformation was missing RC(0,0), which was causing some strange behavior in the kscan driver.
 2021-01-22 16:03:14 -05:00
Pete Johanson
3368a81057 refactor(core): Combine is_ and cast_ event functions. 
* Use a single `as_foo` generated function to conditionally
  return a certain event type from a generic `zmk_event_t*`
  pointer.
 2021-01-20 07:06:11 -05:00
Pete Johanson
3fe2acc2d1 refactor(core): Extra event payloads to own types, refactor API. 
* Make it easier to use *just* event payloads by defining the data,
  and then having event manager macros generate "wrapper structs"
* Improve is_*/cast_* APIs to hide details of full event struct.
* Create `zmk_event_t` typedef to pass to event handlers.
* Bring event names inline w/ consistent `zmk_` prefix.
 2021-01-20 07:06:11 -05:00
Pete Johanson
003db892ad refactor(core): Extra position state change data struct. 
* Separate header and data struct for the event.
* Remove duplicate struct in split code.
 2021-01-20 07:06:11 -05:00
Pete Johanson
95acbd8859 fix(shields): Unflip left Microdox OLED. 2021-01-19 15:57:26 -05:00
innovaker
5978990e6d chore(core): replace Pete Johanson with The ZMK Contributors 
Does not include boards and shields.
 2021-01-16 11:30:37 -05:00
Pete Johanson
65e476df3e fix(splits): Send pos notify from dedicated thread 
* Avoid deadlocks by using a deadicated workqueue for sending
  position state notifications from peripherals.
 2021-01-15 13:50:36 -05:00
Pete Johanson
c11759bc79 fix(hid): Clear all matching usages, not just first. 
* If various events get dropped, we can end up with duplicate
  codes in our report, so tweak to ensure we look for all matches
  and clear them when we have a keycode released.
 2021-01-15 13:50:36 -05:00
Pete Johanson
a0c32bb47e fix(bluetooth): improve LE param update logging 2021-01-15 13:50:36 -05:00
Pete Johanson
a5c39dfa76 fix(ble): Perform GATT notifies from dedicated queue. 
* Zephyr BT stack frees TX buffers from system workqueue,
  and to avoid blocking waiting to allocate, perform notify
  from a dedicated queue.
 2021-01-15 13:50:36 -05:00
Pete Johanson
4aa78a6f8d fix(split): Use queue/work for peripheral events. 
* Avoid corruption by using work to process
  peripheral key position events on the main
  work thread, like local kscan events are.
* Fixes #221
 2021-01-15 13:50:36 -05:00
Pete Johanson
969e5568af fix(boards): Define but don't enable uart0. 
* Set pro-micro TX/RX pins, but don't enable the UART
  by default.
 2021-01-15 01:51:44 -05:00
innovaker
1d18900a99 refactor(core): define usage page as uint16_t 
Aligns with the HID specification.

Usage page values were sometimes declared as uint8_t and sometimes uint16_t.  This commit aligns all instances with the HID specification for consistency.

PR: #521
 2021-01-15 01:48:39 -05:00
Okke Formsma
feb0d5b90c feat(combos): initial implementation 
closes #45
 2021-01-13 21:07:41 -05:00
Nick Winans
002a89765f refactor(Kconfig): Set USB default based on hardware capabilities 
Removes the USB default under every split right half in favor of a default based on hardware capabilities in the main app Kconfig.
 2021-01-08 16:51:50 -05:00
KemoNine
6345bd5468 Remove setting the animation/effect when setting hsv ; some of the effects like glowing will use the hsv color specified 2021-01-08 16:08:13 -05:00
KemoNine
99f932a47d (feat) Allow setting underglow color by key press 2021-01-08 16:08:13 -05:00
Nick Winans
97ed0cc733 feat(core): Add USB logging Kconfig option 2021-01-08 13:03:39 -05:00
KemoNine
5880a284c1 feat(tg4x): Reconcile with official keymap and tidy-up 2021-01-08 10:14:43 +00:00
KemoNine
28bec8541b style(tg4x): Convert Kconfig spaces to tabs 2021-01-08 10:14:43 +00:00
KemoNine
7fd8561b45 fix(tg4x): Add tg4x.conf to mirror other shield setups 2021-01-08 10:14:43 +00:00
innovaker
7fc28328d0 refactor(tg4x): Cleanup tg4x overlay 
Tidies pin definitions and map.
 2021-01-08 10:14:43 +00:00
innovaker
de6ce05391 chore(tg4x): fix copyright header 2021-01-08 10:14:43 +00:00
KemoNine
185ff462d6 docs(tg4x): Add readme for tg4x 2021-01-08 10:14:43 +00:00
KemoNine
cd8567071b fix(tg4x): Fix tg4x keyboard name in Kconfig 2021-01-08 10:14:43 +00:00
KemoNine
3e4f2a3dc3 feat(tg4x): Add underglow support for tg4x + nice_nano 2021-01-08 10:14:43 +00:00
innovaker
561e535a58 refactor(shields): standardize README.md filenames 
Renames instances of `readme.md` to `README.md` so that it's easily noticed.

PR: #561
 2021-01-07 00:34:04 -05:00
innovaker
f17584ca0e chore: standardize # style headers 
Changes made with regex plus some manual tweaks.

Find:
/(?:(?<!#!\/bin\/sh\n)(?:^#\n))*^#.*?[Cc]opyright.*?(\d{4}) *([0-9A-z,_\- ]+).*?\n(?:^#\n)*^#.*?SPDX-License-Identifier:? *(.+) *?\n(?:^#\n)*/gm

Replace:
# Copyright (c) $1 $2
# SPDX-License-Identifier: $3

PR: #564
 2021-01-06 17:00:44 -05:00
KingCoinless
5c11962d98
feat(shields): add helix shield 
PR: #429
 2021-01-05 18:56:47 +00:00
Nick Winans
e5b1f1e1be fix(shield): BFO9000 uses USB on right 2021-01-04 14:08:00 -05:00
Pete Johanson
992cee1bac feat(display): Show layer label in widget. 2021-01-04 13:02:38 -05:00
Pete Johanson
a55b1397c9 feat(keymap): API for retrieving label for a layer 2021-01-04 13:02:38 -05:00
pbz
dcd665999a
feat(shields): add bfo9000 shield 
PR: #472
 2021-01-02 18:52:50 +00:00
Okke Formsma
319ce30270 chore(behavior): use ZMK_BEHAVIOR_OPAQUE in to-layer behavior 2021-01-02 08:08:51 -05:00
Okke Formsma
fa07ba9d32 refactor(behaviors): use ZMK_BEHAVIOR_OPAQUE and ZMK_BEHAVIOR_TRANSPARENT 
Use these instead of the magic return values 0 and 1 for
behavior_driver_api return values.
 2021-01-01 23:07:54 -05:00
Okke Formsma
caa285852a refactor(events): return 'ZMK_EV_EVENT_BUBBLE' instead of magic number 0 2021-01-01 23:07:54 -05:00
innovaker
5a72662898 chore: standardize C style headers 
Changes made with regex plus some manual tweaks.

Find:
/^\/\*.*\n(?:^\*.*\n)*^.*\*.*?[Cc]opyright.*?(\d{4}) *([0-9A-z,_\- ]+).*?\n(?:^.*\*.*\n)*^.*\*.*?SPDX-License-Identifier:? *(.+) *?\n(?:^.*\*.*\n)*.*\*\//gm

Replace:
/*
 * Copyright (c) $1 $2
 *
 * SPDX-License-Identifier: $3
 */

PR: #565
 2021-01-01 23:06:41 -05:00
innovaker
61893e453b
refactor(app): format with prettier (#563) 
prettier --write .

PR: #563
 2021-01-01 22:55:52 -05:00
KemoNine
a3ac0cb5be feat(shields): add ws2812 underglow support to lily58 (nice_nano) 2021-01-01 21:29:22 +00:00
Mango The Fourth
5752b4fbda
feat(shields): add eek shield 
PR: #529
 2021-01-01 14:33:19 +00:00
Pete Johanson
39490552f2 feat(boards): Add BDN9 Rev2 board. 
* Onboard stm32f072.
* 3 possible encoder positions.
* Underglow/per-key not yet support.
 2020-12-31 14:46:15 -05:00
Pete Johanson
5072590af5 fix(sensors): Use status filter on sensors node. 2020-12-31 14:46:15 -05:00
Pete Johanson
d698847769 fix(power): Fix for 2.4 API changes. 2020-12-30 09:29:57 -05:00
Pete Johanson
1c822754c0 fix(west): Restore atmel west module. 2020-12-29 23:30:30 -05:00
KemoNine
d207c3c30f
(feature) Add &to keycode/behavior (#489) 
feat(behaviors): Add `&to` behavior to switch to a layer.
 2020-12-29 11:57:49 -05:00
Nick Winans
43f6d798be feat(ext-power): Cut power when PM is sleeping 2020-12-29 08:30:57 -05:00
KemoNine
87dbd4ca28
Add uppermost, current layer status widget to oled (#493) 
* Add uppermost, current layer status widget to oled

* Run clang format

* Fixup display widget source includes in CMakeLists

* Update layer widget to only be enabled on primary half of a split keyboard and shuffle some of the options specific to the widget to be enabled via the widget

* Update to latest lvgl/zmk/zephyr ; remove version text from oled per PR

* Fixup file names

* Remove last remenants of the version display text from the oled

* Fixup clang-format

Co-authored-by: KemoNine <mcrosson@kemonine.info>
 2020-12-28 20:17:32 -05:00
innovaker
0e71dbc860 refactor(app): replace zmk_keymap_layers_state with zmk_keymap_layers_state_t 
Aligns with typedef _t convention.

PR: #531
 2020-12-28 10:20:12 -05:00
innovaker
87e7c04b00 refactor(app): replace zmk_mod_flags with zmk_mod_flags_t 
Aligns with typedef _t convention.

PR: #531
 2020-12-28 10:20:12 -05:00
innovaker
05b0d185a8 refactor(app): replace zmk_mod with zmk_mod_t 
Aligns with typedef _t convention.

PR: #531
 2020-12-28 10:20:12 -05:00
innovaker
87179698b4 refactor(app): replace zmk_key with zmk_key_t 
Aligns with typedef _t convention.

PR: #531
 2020-12-28 10:20:12 -05:00
Pete Johanson
4fc17e0b3a fix(shields): Enable USB by default on right side. 
* Ensures USB power detection for sleep/charging
  is properly detected on the right side by deafult.
 2020-12-28 10:16:24 -05:00
Pete Johanson
4db5b169bf refactor(splits): Ability to override split role. 
* Move central/peripheral setting to Kconfig.defconfig
  files to allow left/right .conf files to override
  central/peripheral role for splits.
 2020-12-28 10:16:24 -05:00
innovaker
842aa5a842 refactor: replace filename hyphens with underscores 
Aligns *.h and *.c to underscore naming convention.

These were kept (with warnings) for backwards compatibility with external boards/shields:
- kscan-mock.h
- matrix-transform.h
They should be removed in the future.

PR: #523
 2020-12-28 01:15:35 -05:00
Okke Formsma
6927abee6e chore(tests): remove useless &cp test 2020-12-28 00:39:53 -05:00
innovaker
2233f457b2 chore(display): add header to CMakeLists.txt 
PR: #533
 2020-12-21 23:42:55 -05:00
innovaker
f8e43932ba refactor(app): remove zmk_action 
zmk_action isn't referenced anywhere.

PR: #530
 2020-12-21 23:34:40 -05:00
innovaker
aa8efa7078 chore(display): add header to Kconfig 
PR: #534
 2020-12-21 23:30:25 -05:00
innovaker
1f5680f0df refactor(app): remove handlers.h 
handlers.h isn't referenced elsewhere.

PR: #526
 2020-12-21 23:26:52 -05:00
innovaker
0d52915756 chore(display): align status_screen copyright 
PR: #535
 2020-12-21 23:15:53 -05:00
innovaker
89532eadeb fix(sticky keys): add 0xFF mask to usage_page 
Aligns unpacking of usage_page with its equivalent line in keycode-state-changed.h

PR: #520
 2020-12-17 16:52:15 -05:00
innovaker
e2aef89d99 refactor(endpoints): rename usage_report parameter to usage_page 
Aligns zmk_endpoints_send_report function declaration with its definition.

PR: #522
 2020-12-17 16:40:59 -05:00