If multiple sticky keys with quick release were nested, only the first one
was properly released. This fix makes sure all of them are released properly.
Fixes https://github.com/zmkfirmware/zmk/issues/1149
To combine multiple sticky modifiers, the sticky keys must ignore
other (sticky) modifier keypresses.
This behavior is important for "callum-style mods", where all modifiers
are sticky mods.
Fixes#829
* Add strlcpy from public domain version.
* Leverage strlcpy to detect truncation of behavior dev strs, and log.
* Use `offsetof` for cleaner detection on peripheral side.
* Use Zephyr auto CCC discovery instead of doing it ourselves.
* Split service versus characteristic discovery into dedicated
steps in the flow.
* Fix for not searching properly when connecting to a peripheral
a second time.
* GATT characteristic allowing passng data + behavior
label to invoke the behavior on the peripheral side.
* Behaviors have a locality setting to specify where they run.
* Build reset/power/RGB on peripheral.
* Add Contra Shield (#1)
* Add bluetooth control layer to contra keymap (#2)
* fix contra keymap issues
* add bluetooth control layer
* clean up contra files
* add contra.conf file
* add missing bracket for default_layer
* update copyright year to 2021
* add contra metadata file
* refactor pro micro overlay for new syntax
* initial files to get stuff working
* Keymap by Ladniy
* Format update to new standards
* keymap update
* header
* Fixed transform, removed left and right .conf files
* Apply suggestions from code review
Formatting
Co-authored-by: Nick Winans <nick@winans.codes>
Co-authored-by: Nick Winans <nick@winans.codes>
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* removed naked60 config files
* Per PR feedback from ZMK maintainers, added hardware metadata file and renamed Pro Micro pins.
* removed tabs from keymap and replaced with normal spaces
* Update app/boards/shields/murphpad/murphpad.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/murphpad/murphpad.zmk.yml
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/murphpad/murphpad.zmk.yml
Co-authored-by: Nick Winans <nick@winans.codes>
Co-authored-by: honorless <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: Nick Winans <nick@winans.codes>
* Initial commit of boardsource5x12
* Added copyright/license header
* Update app/boards/shields/boardsource5x12/Kconfig.defconfig
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/boardsource5x12.overlay
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/Kconfig.shield
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/boardsource5x12.keymap
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Swapping keymap for what used in Naked60 as it's another 60 key board, so it keeps it consistent.
* Update app/boards/shields/boardsource5x12/boardsource5x12.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
* renamed layers in boardsource5-12
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
Co-authored-by: Nick Winans <nick@winans.codes>
* Add support for keeb.io fourier
* Update app/boards/shields/fourier/fourier_right.overlay
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/fourier/fourier_left.overlay
Co-authored-by: Nick Winans <nick@winans.codes>
* Convert spaces to tabs in .dtsi
Co-authored-by: Nick Winans <nick@winans.codes>
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
This is a generalization of the existing concept of tri-layer support
that's already well known. Essentially, a conditional-layer
configuration activates a particular layer (the then-layer) when one or
more other layers (the if-layers) are activated.
This is commonly used on ortho keyboards to activate a third "adjust"
layer while the primary two layers ("lower" and "raise") are active.
* Add optional `hold-trigger-key-positions` hold-tap configuration
* Leverage configuration for decision making around when to trigger
hold decision in hold-taps.
* Add docs for new configuration.
* Tests for the new config/decision logic.
Switched the GPIO matrix driver to debouncing using a simple integrator
algorithm. Whenever a key is pressed, we now scan at a rate controlled
by debounce-scan-period-ms (default 1 ms) until all keys are released,
then return to either waiting for an interrupt or polling more slowly.
The timers for key press and release can now be controlled separately,
so debounce-period is deprecated in favor of debounce-press-ms and
debounce-release-ms. Global Kconfig options
ZMK_KSCAN_DEBOUNCE_PRESS_MS and ZMK_KSCAN_DEBOUNCE_RELEASE_MS are also
added to make these easier to set.
Added documentation for debouncing options.
Recent refactoring of the font handling seems to have broken the display
of the last symbol of the output status widget. From my analysis the
last symbol is truncated because the buffer simply is too small.
Increasing the buffer size to 9 fits all three possible symbols.
* Add ZMK_HID_CONSUMER_REPORT_USAGES choice to allow choosing
between full consumer usage range, with poor OS compat,
or basic consumer usage range, with broader compat.
* Add new Kconfig settingsx to allow selecting system or dedicated
work queue for performing UI updates.
* Allow UI updates to not block other system tasks when display is
updating, especially important for e-ink displays.
* Workaround for ensuring macOS pairing happens early enough,
for their stack, we require encryption for the hids report map and
report ref characteristics as well, to trigger pairing ealier in the
connection process for macOS.
For split keyboards using an IO expander over TRRS/i2c, if the
right half isn't connected, we should be able to gracefully
fallback to the left side still working.
Refactored the GPIO matrix kscan driver so that only the data and config
structures are defined in the foreach macro. Functionality is unchanged
except for the addition of DT properties to adjust polling speed.
This should make it easier to add other enhancements later, like
improved and customizable debounce behavior.
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
A hold-tap timer event would be triggered too soon if the hold-tap
was delayed for longer than its tapping-term. This may cause
accidental hold behavior when the correct behavior would be tap.
By queuing the timer event instead of executing it immediately,
other delayed events get a chance to be processed properly.
The current combo completion check only makes sure the last key in the
combo is set. This works when the combo is typed correctly initially, or
when reraising events in a combo of length two. However, it fails for
longer combos since the last event in pressed_keys might be set, but the
first (or subsequent) event in pressed_keys can be NULL thanks to
release_pressed_keys.
Also added a regression test.
This test doesn't test a long combo that completes, but rather one
that's incomplete (so the combo doesn't trigger). Renaming to avoid
confusion when we add more long combo tests.
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
This commit fixes the pin definition for BlueMicro840. Based on the
schematics, the blue led is at pin 1.10.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
By setting CONFIG_DEBUG, the native_posix builds will not be optimized
which makes debugging them much nicer.
By setting CONFIG_SYS_CLOCK_TICKS_PER_SEC to 1000, debug prints have a
higher resolution and not always show up as multiples of 10ms.
Quick release for sticky keys failed for non-layer keys. The sticky key
was released just before the key that was supposed to be modified was
handled.
The issue was caused by an error in the sticky key logic, which released
the sticky key before handling the key up event.
Fixes#696.
