zmk_mf68/docs/docs/behavior/layers.md

title	sidebar_label
Layer Behaviors	Layers

Summary

Often, you may want a certain key position to alter which layers are enabled, change the default layer, etc. Some of those behaviors are still in the works; the ones that are working now are documented here.

Defines To Refer To Layers

When working with layers, you may have several different key positions with bindings that enable/disable those layers. To make it easier to refer to those layers in your key bindings, and to change which layers are where later, you can add a set of #defines at the top of your keymap file, and use those layer in your keymap.

For example, if you have three layers, you can add the following to the top of your keymap:

#define DEFAULT 0
#define LOWER   1
#define RAISE   2

This allows you to use those defines, e.g. LOWER later in your keymap.

Momentary Layer

The "momentary layer" behavior allows you to enable a layer while a certain key is pressed. Immediately upon activation of the key, the layer is enabled, and immediately open release of the key, the layer is disabled again.

Behavior Binding

• Reference: &mo
• Parameter: The layer number to enable/disable, e.g. 1

Example:

&mo LOWER

Toggle Layer

The "toggle layer" behavior allows you to enable a layer until the layer is manually disabled.

Behavior Binding

• Reference: &tog
• Parameter: The layer number to enable/disable, e.g. 1

Example:

&tog LOWER

"Toggle layer" for a :

#define DEFAULT 0
#define NAVI    1

#define NONE 0

/ {
	keymap {
		compatible = "zmk,keymap";

		default_layer {
			bindings = <
                &tog NAVI &kp KDIV  &kp KMLT  &kp KMIN
                &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp KPLS
                &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp KPLS
                &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp RET
                &kp NUM_0 &kp NUM_0 &kp DOT   &kp RET
			>;
		};

		nav_layer {
			bindings = <
                &tog NAVI &kp KDIV  &kp KMLT  &kp KMIN
                &kp HOME  &kp UARW  &kp PGUP  &kp KPLS
                &kp LARW  &none     &kp RARW  &kp KPLS
                &kp END   &kp DARW  &kp PGDN  &kp RET
                &kp INS   &kp INS   &kp DEL   &kp RET
            >;
		};
	};
};

It is possible to use "toggle layer" to have keys that raise and lower the layers as well.