Pete Johanson
eff1b8223b
refactor(keys): Unify usage page.
...
* Remove need for separate `&cp` behavior, but
keep it for now for backward compat.
* Refactor sensor inc/dec as well.
2020-11-05 14:55:40 -05:00
innovaker
c6abdb1890
fix(keys): Replace GUI with Application / Context Menu
...
This was a misrepresentation in the standardized keys that originated in earlier code.
2020-11-04 14:31:59 -05:00
innovaker
aebe90908d
test: Replace superseded key names in test keymaps
...
Replace deprecated key names (LSFT, LCTL, RCTL, M_NEXT).
Replace abbreviated names with fully qualified names (LSFT, LCTL, LALT, LGUI, RGUI).
Follow-up to #21 .
2020-11-03 23:50:54 -05:00
innovaker
d748d8a749
refactor: Replace superseded key names
...
Replace deprecated key names (LCTL, NUM_0, NUM_1).
Replace abbreviated names with fully qualified names (LCTL, RGUI, NUM_0, NUM_1).
Follow-up to #21 .
2020-11-03 23:50:54 -05:00
innovaker
a65295c2a7
feat(keys): Standardize keys
...
Deprecate superseded names with comments.
Add standardized key names.
Closes #21 . Closes #158 . Closes #161 . Closes #246 .
2020-11-03 23:50:54 -05:00
innovaker
7e795bf4f9
feat(hid): Enhance consumer report to support higher codes
...
Switch from single byte to double byte usages.
Allow the entire 0x0C page for future compatibility.
Closes #234 . Co-requisite of #21 .
2020-11-03 23:50:54 -05:00
innovaker
711658206f
refactor(hid): Replace Zephyr usages with ZMK usages in HID reports
...
Replace `USAGE_GEN_DESKTOP` with `HID_USAGE_GD`.
Replace `USAGE_GEN_DESKTOP_KEYBOARD` with `HID_USAGE_GD_KEYBOARD`.
Replace `USAGE_GEN_DESKTOP_KEYPAD` with `HID_USAGE_KEY`.
Replace `0x0C` with `HID_USAGE_CONSUMER`.
Closes #217 .
2020-11-03 23:50:54 -05:00
innovaker
e925319e4c
refactor(hid): Replace deprecated HID usage page references
...
Deprecate `USAGE_KEYPAD` and replace with `HID_USAGE_KEY`.
Deprecate `USAGE_CONSUMER` and replace with `HID_USAGE_CONSUMER`.
Closes #217 .
2020-11-03 23:50:54 -05:00
innovaker
3c0a0ff308
feat(hid): Add preprocessor definitions for HID usages v1.21
...
Developed from specification:
https://usb.org/sites/default/files/hut1_21.pdf
Closes #217 . Prerequisite of #21 .
2020-11-03 23:50:54 -05:00
Pete Johanson
dd7ab9914a
Merge pull request #270 from careyk007/refactor_kconfig
...
Refactor Kconfig
2020-11-03 23:05:06 -05:00
Nick
1af4221908
feat(underglow): Debounce state settings save
2020-11-03 22:08:20 -05:00
Pete Johanson
a29e041b1f
fix: Formatting fix.
2020-11-03 00:30:42 -05:00
Pete Johanson
32e7159373
refactor(hid): Mod defines in dedicated header.
2020-11-03 00:21:20 -05:00
Okke Formsma
55b5936d00
clang-format
2020-11-03 00:19:37 -05:00
Okke Formsma
4f258efbf1
initial implementation for modifiers
...
https://github.com/zmkfirmware/zmk/issues/86
2020-11-03 00:19:37 -05:00
Nick
82a5736d08
fix(boards): Remap flash to account for bootloader
2020-11-02 23:07:23 -05:00
Nick Winans
89b8bfc95d
fix(battery): Only log if finding battery device failed
...
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
2020-11-01 23:00:54 -05:00
Nick
953de71646
feat(battery): Add BAS GATT reporting
2020-11-01 23:00:54 -05:00
Nick
74fa113d88
fix(boards): Rename BVD labels
2020-11-01 23:00:54 -05:00
Nick
8779563896
fix(bvd): Add SENSOR_CHAN_ALL support
2020-11-01 23:00:54 -05:00
Carey
3f4d47a06e
focus on refactor
2020-10-31 07:24:38 -05:00
Pete Johanson
2d31e1d05f
Merge pull request #269 from joelspadin/endpoint-selection
...
feat: only send HID reports to one endpoint
2020-10-31 00:09:47 -04:00
Joel Spadin
821f054071
feat(endpoints): remove redundant connection check
2020-10-28 18:15:05 -05:00
Joel Spadin
440d09fd45
feat(endpoints): simplify behavior constants
2020-10-28 18:15:05 -05:00
Joel Spadin
2fe1fbb526
feat(endpoints): rename behavior to outputs
...
"Outputs" is probably easier for most people to understand than "endpoints".
2020-10-28 18:15:05 -05:00
Joel Spadin
600bba25f0
feat(endpoints): add preferred endpoint setting
...
Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.
Added a new behavior to control this setting. It supports commands:
&end END_USB - Prefer USB output
&end END_BLE - Prefer BLE output
&end END_TOG - Toggle between USB and BLE
2020-10-28 18:15:05 -05:00
Joel Spadin
b538e60532
feat(endpoints): update on BLE profile change
...
Added zmk_ble_active_profile_is_connected() to allow code outside ble.c to check
the status of the active profile, and changed the ble_active_profile_changed
event to also notify when the active profile connects or disconnects.
Changed endpoint selection to to also update when the active profile changes,
connects, or disconnects.
2020-10-28 18:15:05 -05:00
Joel Spadin
8f666cecc9
feat(endpoints): clear HID report on endpoint change
...
This prevents stuck keys when switching endpoints by clearing
everything in the HID report and sending one last report before
switching to the new endpoint.
2020-10-28 18:15:05 -05:00
Joel Spadin
1d369ffa73
feat: only send HID reports to one endpoint
...
Added some utility functions and an event for tracking the state of the
USB connection.
Updated endpoints.c to select a single endpoint to send HID reports to
based on the status of the USB and BLE connections. Partially fixes #206 .
Future commits will add a user setting to control which endpoint is used if
both USB and BLE are ready.
2020-10-28 18:15:05 -05:00
Carey
c5172e4337
move initialization priorities to advanced menu
2020-10-28 07:47:22 -05:00
Carey
99ad9cbdef
Merge https://github.com/zmkfirmware/zmk into refactor_kconfig
2020-10-28 07:40:54 -05:00
Pete Johanson
73c83e81ce
Merge pull request #296 from neegool/add_boardsource3x4
...
Add Boardsource 3x4 shield
2020-10-27 23:24:10 -04:00
innovaker
c402e953f6
feat(hid): Make keypad report boot friendly
...
Add missing byte to make keypad report boot friendly.
2020-10-27 22:55:40 +00:00
Nigel Rodriguez
75b7f2a7c5
Remove bt unpair combo + fix keymap
2020-10-28 06:55:00 +08:00
innovaker
8ce7d8de01
refactor(hid): Refactor consumer report to a configurable size
2020-10-27 22:36:26 +00:00
innovaker
f4596fc784
refactor(hid): Refactor keypad report to use a configurable integer array
...
Replace NKRO bit array with configurable integer (DV) array.
2020-10-27 22:36:26 +00:00
Jay Greco
8a98212a02
Update demux kscan driver as per PR feedback
...
- Remove kscan_gpio_irq_callback
- Remove kscan_gpio_irq_callback_handler
- Remove irq_callbacks
+ Add TODO noting timer and sleep state interactions
2020-10-27 12:44:59 -07:00
Jay Greco
1a6fe846e4
Update NIBBLE keyboard name as per PR feedback
...
- Revert accidental VS code settings change
2020-10-27 12:44:59 -07:00
Jay Greco
d90592aac5
Add NIBBLE shield
...
+ Added required files for nullbits NIBBLE
2020-10-27 12:44:59 -07:00
Jay Greco
1522c91d73
Add new kscan_gpio_demux driver
...
+ zmk,kscan_gpio_demux is now a compatible kscan option
+ kscan_gpio_demux is based heavily off of the implementation of
kscan_gpio_matrix, modified to address cols using an n-to-1
demultiplexer chip instead of discrete IO
+ Added zmk,kscan_gpio_demux.yaml file
* modified CMakeLists to include new source files
2020-10-27 18:58:58 +00:00
Pete Johanson
c707ab45ef
Merge pull request #297 from Nicell/boards/reviung41
...
Add Reviung41 Shield Definitions
2020-10-27 00:27:17 -04:00
Pete Johanson
07cf103747
Merge pull request #303 from innovaker/kscan-mock-32
...
feat(kscan_mock): Increase max number of events
2020-10-27 00:03:23 -04:00
Nick
a008731103
Implement Kconfig and enhance error checks
2020-10-26 16:01:57 -05:00
innovaker
9c4b766bc6
feat(kscan_mock): Increase max number of events
...
This is necessary for testing a large number of events (e.g. every key code) within a single build/pass.
The u8_t limitation became apparent during end-to-end testing of #21 .
2020-10-25 20:36:03 +00:00
Nick
7296b96797
Add Reviung41 Shield Definitions
2020-10-24 21:08:00 -05:00
Nick
63007fb6c1
fix: clang-format
2020-10-24 18:54:56 -05:00
Nick
adb07926b1
Remove newlib dep
2020-10-24 18:52:34 -05:00
Nigel Rodriguez
9d624740d9
Fix wrong comment tokens
2020-10-24 12:40:49 +08:00
Nigel Rodriguez
6a9a6e6d8e
Add Boardsource 3x4 shield
2020-10-24 12:21:15 +08:00
Nick
a67a8cd3b8
Check if fetch channel is supported
2020-10-23 22:37:44 -05:00
Nick
6047415b1c
Fix build for boards without voltage divider
2020-10-23 01:19:47 -05:00
Nick
8efcd80f3a
Add missing ADC and fix formatting
2020-10-23 00:57:32 -05:00
Nick Winans
70ffcca3b4
Merge branch 'main' into bluetooth/battery-reporting
2020-10-23 00:55:50 -05:00
Nick
162c6b77db
clang-format and add missing defconfig values
2020-10-23 00:50:39 -05:00
Nick
3082455aec
Refactor driver to use Sensor API
2020-10-23 00:45:59 -05:00
Carey
6aae667826
merge changes from master
2020-10-20 21:47:49 -05:00
Pete Johanson
ef37f17796
Merge pull request #109 from Nicell/underglow/state-persistence
...
Add RGB underglow state Kconfig and settings
2020-10-18 22:29:55 -04:00
Pete Johanson
36d3d01a22
feat(usb): Add proper USB product ID.
...
* Use openmoko product ID from:
https://github.com/openmoko/openmoko-usb-oui/pull/15
2020-10-18 13:24:37 -04:00
Pete Johanson
3ecd7e42ab
Merge pull request #282 from petejohanson/ble/advertising-power-savings
...
BLE: Only advertise when needed.
2020-10-18 00:32:48 -04:00
Pete Johanson
9d512eaef0
fix(bluetooth): Add adv data in non-peripherals.
2020-10-16 09:49:28 -04:00
Pete Johanson
b07475b7d4
fix(bluetooth): Stop adv on connected profile.
2020-10-16 00:56:05 -04:00
Pete Johanson
818f0a1f91
fix(bluetooth): Advertise name + appearance.
...
* Properly put device name and GAP appearance
in advertising packets, for proper display in
macOS, Android, etc.
* Closes #124
2020-10-16 00:48:53 -04:00
Pete Johanson
e468677c4e
fix(shields): Proper cradio Kconfig setup.
2020-10-15 20:29:00 -04:00
Pete Johanson
ed28f5a6a3
Merge pull request #224 from davidphilipbarr/cradio
...
Cradio
2020-10-15 17:21:23 -04:00
Pete Johanson
204d1300ba
fix(ble): Only advertise when needed.* Once we have a peer connected to for the active profile, don't continue advertising.
2020-10-15 00:51:21 -04:00
Pete Johanson
3186a553a5
fix(shields): Add default qaz.conf file.
2020-10-13 21:00:54 -04:00
Pete Johanson
59e8c58051
fix: Copyright header for cradio.dtsi
2020-10-13 00:11:08 -04:00
Pete Johanson
f35d9f8f69
Merge pull request #258 from megamind4089/dev/ext-power-behavior
...
New behavior for ext power control
2020-10-13 00:01:32 -04:00
Pete Johanson
eee8eb6e77
fix: Single author file copyright header fix.
2020-10-12 13:04:24 -04:00
Pete Johanson
6d9aa4f5ea
fix: Updated copyright headers to single author file.
2020-10-12 13:03:10 -04:00
Mega Mind
2e649b7fd4
Fix compilation errors and minor tweaks
2020-10-13 00:09:57 +08:00
Mega Mind
4adcb396ff
Rebased and fixed nasty code
2020-10-12 23:54:56 +08:00
Pete Johanson
a2b4a08ddc
Merge pull request #226 from mubeenkhan94/tg4x-shield-dev
...
Add TG4X rev 2.1 shield
2020-10-12 11:49:54 -04:00
Mega Mind
5d1c083959
Added toggle and removed a param
2020-10-12 23:42:01 +08:00
Mega Mind
b5e1c8a7ad
New behavior for ext power control
2020-10-12 23:42:01 +08:00
Pete Johanson
367dcd4820
Merge pull request #267 from nuxiom/fix-matrix-polling
...
Fix matrix polling conditional macro
2020-10-12 10:38:34 -04:00
Mubeen Khan
d45e7b3c11
Merge pull request #7 from zmkfirmware/main
...
Update to stay even with upstream main
2020-10-11 23:17:04 -05:00
Kellen Carey
8b9b247592
allow ble to be enabled if split transport is ble
2020-10-11 20:11:19 -07:00
Kellen Carey
8e298ec701
happy with layout, need to improve interactions
2020-10-11 18:05:27 -07:00
Kellen Carey
7a2314ef59
refactor kconfig to look nicer
2020-10-11 17:36:32 -07:00
Joel Spadin
7798c974f6
fix: don't leak bt_conn refs
...
bt_conn_lookup_addr_le() gives us a new reference that must be released
with bt_conn_unref()
2020-10-11 17:04:34 -05:00
Nuxiom
1c0c02e097
Reformatted according to clang-format lint
2020-10-11 17:51:06 +11:00
Nuxiom
78cb6c8b21
Fix kscan_gpio_irq_callback_handler_##n conditional macro
2020-10-11 17:33:07 +11:00
Mubeen Khan
7fc7a35117
Revised keymap to Qwerty
2020-10-10 16:51:17 -05:00
Okke Formsma
d38740cebf
Add timestamps to position and behavior events ( #147 )
...
* Add timestamps to position events and behaviors.
- Take original event timestamps into consideration so nested tap-holds have proper timing.
- Add position and timestamp to keycode state changed event so the one-shot behavior can properly identify other keypresses and timings.
- Add timestamp to position events received from peripheral
* reduce number of arguments to behaviors
2020-10-10 17:32:53 -04:00
Mubeen Khan
4fd6c14ae9
Merge pull request #4 from zmkfirmware/main
...
make even with main
2020-10-10 16:32:16 -05:00
Pete Johanson
e1dcf1514f
Merge pull request #242 from megamind4089/feature/ext-power
...
[RDY] Driver to control the external power output
2020-10-09 20:40:48 -04:00
Mega Mind
4d81b10ba7
Added driver to control the external power output
...
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
2020-10-10 08:11:46 +08:00
Kellen Carey
a695d0d359
oops
2020-10-09 12:18:57 -07:00
Kellen Carey
0b125c028c
address pr comments
2020-10-09 11:48:06 -07:00
David Barr
01b0bad7a2
update headers, spruce up keymap, streamline dtsi.
2020-10-09 17:05:09 +01:00
David Barr
2b09174ec1
update header again based on corne
2020-10-08 11:22:34 +01:00
David Barr
ad77df5989
capital C
2020-10-08 11:20:22 +01:00
David Barr
a629aa0b42
Update Kconfig.defconfig
2020-10-08 11:17:53 +01:00
David Barr
eeac54e9a4
Update cradio_left.overlay
2020-10-08 11:16:28 +01:00
David Barr
55c1f51b31
update header
2020-10-08 11:16:08 +01:00
David Barr
a3cdab9e9f
update header
2020-10-08 11:14:46 +01:00
David Barr
24e73f6861
Update cradio.dtsi
2020-10-08 11:12:04 +01:00
David Barr
95b94009a9
remove dupe copyright
2020-10-08 11:11:40 +01:00
David Barr
7d582b6b8e
remove dupe copyright
2020-10-08 11:11:01 +01:00
David Barr
426b25892f
rename gpio to direct polling
2020-10-08 11:09:35 +01:00
Kellen Carey
ca29c40206
clean up keymap
2020-10-07 21:22:08 -07:00
Kellen Carey
f3eaa7e424
working shield, need to improve default keymap
2020-10-07 20:40:04 -07:00
David Barr
d5d8d79a76
Update cradio_right.overlay
2020-10-07 16:23:59 +01:00
Pete Johanson
12b9a37005
Merge pull request #211 from petejohanson/core/keymap-port-event-exploration
...
Use PORT events for kscan matrix interrupts, add option for deep sleep.
2020-10-06 17:32:35 -04:00
Pete Johanson
a7496ab064
feat(power): Initial deep sleep work.
...
* New ZMK_SLEEP Kconfig symbol to enable the functionality.
* Switch to PORT events that allows wake from deep sleep.
* Initial basic power management policy, with idle ms,
and ignoring deep sleep if we detect a USB connection.
2020-10-06 17:24:36 -04:00
Pete Johanson
ce59223efe
fix(shields): Typo in makerdiary URL.
2020-10-05 23:40:29 -04:00
Mega Mind
b8cb5f939a
M60 keymap update and misc changes
...
* Updated M60 keymap
* Make nrfjproj as default runner
* Remove the polling config
2020-10-05 21:24:39 +08:00
Mega Mind
e2299836bc
Update contributors in all keymap files
2020-10-05 21:23:38 +08:00
Mega Mind
9d06c730ba
Added Makerdiary M60 keyboard
2020-10-05 21:23:38 +08:00
Mega Mind
c54decd144
Added Makerdiary M.2 module
2020-10-05 21:23:38 +08:00
Pete Johanson
7d222e1553
Merge pull request #237 from ChaosinaCan/direct-gpio-fix
...
Fix direct GPIO when using interrupts
2020-10-04 23:04:16 -04:00
Pete Johanson
9be566603e
feat(kscan): Use PORT events for kscan matrix interrupts
...
* Lower power usage compared to regular interrupts on nrf52.
2020-10-04 22:03:21 -04:00
Pete Johanson
bbf5a5905a
refactor(usb): Report USB status w/o HID output.
2020-10-04 21:56:09 -04:00
Joel Spadin
4121b07f7f
fix(kscan): fix direct GPIO when using interrupts
...
Fixed initializing interrupts for direct GPIO when
CONFIG_ZMK_KSCAN_DIRECT_POLLING is not enabled. IS_ENABLED() is needed to map
the possibly-undefined value to 0 or 1 so COND_CODE_0() and COND_CODE_1() work.
2020-10-04 14:07:20 -05:00
Joel Spadin
fc5915b200
improvement(kscan): use ARRAY_SIZE macro
2020-10-04 14:07:14 -05:00
Joel Spadin
f6f8abe055
fix(ec11): allow more than one encoder
...
Fixes "device.h:101:11: error: redefinition of '__device_ec11'" in firmware that
has more than one encoder.
2020-10-03 14:05:05 -05:00
David Barr
260044ae5e
Delete default.keymap
2020-10-02 14:17:35 +01:00
David Barr
38a418a1d1
updates as per PR changes (i hope)
2020-10-02 14:16:59 +01:00
Dev
c68e3d3e42
Add missing licensing header
...
Fixes #205
2020-10-02 13:14:31 +05:30
Pete Johanson
307a8d09db
feat(usb): Function to access latest USB status.
...
* To be leveraged by upcoming power
management work.
2020-10-01 17:18:01 -04:00
Pete Johanson
028dfae92e
chore: Fix remaining formatting issues.
2020-10-01 11:43:00 -04:00
Pete Johanson
e993378b2a
chore: Fix some accidental formatting issues.
2020-10-01 11:24:57 -04:00
Pete Johanson
300b753ced
Merge pull request #212 from shurikai/zmk-202
...
Add polling (instead of interrupt) based matrix kscan detection, to avoid interrupt limits on stm32
2020-10-01 00:36:29 -04:00
Mubeen Khan
16df1522c2
Add TG4X rev 2.1 shield
2020-09-30 21:35:51 -05:00
David Barr
17bee0223a
remove ds_store files
2020-09-30 17:12:39 +01:00
David Barr
a3d0c03726
rename cradios to cradio
2020-09-30 16:20:41 +01:00
Pete Johanson
182a6dca1f
fix(bluetooth): Proper max paired/conns.
...
* Proper max values for both split central, and
non-split keyboards.
2020-09-29 12:21:06 -04:00
Jason Chestnut
c2a861c0e6
Modify preprocessor directives to use basic #if !defined() rather than Zephyr macros where appropriate.
2020-09-28 08:24:51 -04:00
jason
9392c4f9ff
Fix preprocessor flag issues for pull request.
2020-09-27 21:27:30 -04:00
Noah Thornton
9afd44b9d4
Provide context on Quefrency physical PCB layouts
...
The Quefrency board has two options for each left and right half,
resulting in 4 unique combinations. This has been noted in the
overlay and dtsi files.
2020-09-26 22:10:14 -05:00
Noah Thornton
24b638dfa3
Apply suggestions from code review
...
Revise copyright header
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
2020-09-26 21:09:19 -05:00
Noah Thornton
7f7c7037b0
Add quefrency shield
2020-09-26 11:59:12 -07:00
Jason Chestnut
cfc75a118e
Fix merge error.
2020-09-25 11:51:14 -04:00
Jason Chestnut
cca8337f05
Add support to GPIO matrix driver for matrix polling, rather than interrupt-based IO.
...
- Add ZMK_KSCAN_MATRIX_POLLING config flag to Kconfig
- Update matrix driver code to use the above flag to conditionally add the handling code for polling operations.
2020-09-25 11:49:07 -04:00
Jason Chestnut
b1dce208f8
Add matrix polling logic to matrix GPIO driver.
2020-09-25 11:29:21 -04:00
Jason Chestnut
9668305621
Restore original matrix driver to correct implementation errors.
2020-09-24 17:35:51 -04:00
Jason Chestnut
5c4705d465
Add new matrix scan flag and implementation in the gpio matrix driver.
2020-09-24 14:30:47 -04:00
Jason Chestnut
53425aa3c4
Rename kscan direct wired driver polling kscan flag in preparationfor addition of new matrix driver flag that enables polling.
2020-09-24 07:55:32 -04:00
Kristoffer Onias
8e92ae3089
Remove bt_unpair_combo from romac_plus.overlay
2020-09-23 17:53:41 -07:00
Kristoffer Onias
641524b1b9
Update Keymap legends for consistency
2020-09-23 17:01:40 -07:00
Kristoffer Onias
9fffebd5da
Adopt new BT unpairing standards
2020-09-23 16:31:02 -07:00
Kristoffer Onias
0ce36865b2
Update keyboard name to be more user friendly
2020-09-23 16:23:54 -07:00
Kristoffer Onias
4c092044ce
Adopt single authors headers
2020-09-23 16:21:42 -07:00
Jason Chestnut
31af9646e6
Adding kconfig flag for enabling matrix polling (vs interrupts) on the matrix gpio driver.
2020-09-23 16:05:29 -04:00
Kristoffer Onias
f1fd71c231
Disabled ec11 since it's an optional configuration
2020-09-23 12:39:06 -07:00
Kristoffer Onias
c044fe8532
Add RoMac plus v4 support on nice nano v1
2020-09-21 22:44:00 -07:00
Pete Johanson
90bfe6026d
fix(boards): Flash Planck with dfu-util
.
2020-09-21 09:49:56 -04:00
Pete Johanson
9b89ed7be4
Merge pull request #187 from kurtis-lew/main
...
Fixed Iris default build/Updated Dev Guide
2020-09-19 23:12:17 -04:00
Nick
f5909f9c26
fix(clang-format)
2020-09-19 19:18:03 -05:00
Nick
da0fb965f6
Merge remote-tracking branch 'upstream/main' into bluetooth/battery-reporting
2020-09-19 19:15:05 -05:00
Nick
844f2c7674
Voltage divider driver initial implementation
2020-09-19 19:14:59 -05:00
David Barr
ed5d3646fe
Add files via upload
2020-09-19 10:56:40 +01:00
David Barr
2855ba75f5
Actually really working
...
Ok, both sides work as expected, need to write a keymap.
2020-09-19 10:55:07 +01:00
Nick
608ae0df6d
fix lint with clang-format
2020-09-15 14:47:19 -05:00
Nick
18d21b0362
Merge remote-tracking branch 'upstream/main' into underglow/state-persistence
2020-09-15 14:41:59 -05:00
Nick
81bc157f53
Fix underglow not working by default
2020-09-15 14:31:59 -05:00
Kurtis Lew
d86e571757
Update iris.keymap
2020-09-14 20:47:55 -07:00
kurtis-lew
64c11f15b0
Removed Copyright Header causing Parse Error
2020-09-14 20:19:54 -07:00
Pete Johanson
c0806d27f1
Merge pull request #186 from BrainWart/tests/fix-build-error-fail
...
Integration Tests Should Fail on Build Errors
2020-09-14 10:50:52 -04:00
Pete Johanson
1cf0bad792
Merge pull request #185 from tominabox1/qaz_update
...
QAZ shield keymap update
2020-09-14 10:41:35 -04:00
tominabox1
0bf4467729
Update Kconfig.shield
2020-09-14 09:35:57 -05:00
Cody McGinnis
f6269df5fc
fix(tests): return error code when build fails
2020-09-14 10:34:05 -04:00
tominabox1
42c42ccbbd
Fixed some space/tab issues as well as updated copyright statements
2020-09-14 09:25:31 -05:00
Pete Johanson
9110335142
Merge pull request #183 from petejohanson/ops/clang-format-checks
...
Standardize code formatting using clang-format w/ LLVM style
2020-09-14 09:46:35 -04:00
tominabox1
62c47b1981
Remove duplicate include
2020-09-14 08:46:07 -05:00
tominabox1
63e105db90
Revising keymap to jive with upstream changes
2020-09-14 08:45:31 -05:00
tominabox1
fc167f5f5e
Update QAZ keymap for bluetooth config options and homerow hold-taps
2020-09-14 08:44:20 -05:00
Pete Johanson
2c38947d1d
Merge pull request #184 from Nicell/boards/bt-keymap-bindings
...
feature(board): add BT prof management to defaults
2020-09-14 09:27:26 -04:00
Nick
7b12dc6caf
feature(board): add BT prof management to defaults
2020-09-13 23:29:31 -05:00
Pete Johanson
191a2d755a
chore: clang-format the codebase.
...
* Use the LLVM style
* Override indent width (8) and column limit (100)
* Fixes #142 .
2020-09-14 00:10:34 -04:00
Pete Johanson
4658999e31
fix(bluetooth): Reject pairing to taken profiles.
2020-09-13 22:33:31 -04:00
Pete Johanson
6c8b0b53f0
refactor(bluetooth): More concise names.
2020-09-13 22:33:31 -04:00
Pete Johanson
652bb6ce05
feat(bluetooth): Add new settings_reset shield.
...
* Easy to build board/image that will clear
saved profile/bond information for a fresh
start for keyboards.
2020-09-13 22:33:31 -04:00
Pete Johanson
fb91be5164
fix(bluetooth): Configs for non-splits.
2020-09-13 22:33:31 -04:00
Pete Johanson
39f980a06d
feat(bluetooth): Add back profiles, split fixes.
...
* Add back in profiles, not using Zephyr
BT identity infrastructure.
* Restore additional `&bt` commands for profile
operations.
* Fix for split pairing and subscriptions, since
Zephyr persists subscriptions across connects.
* Remove keymap from peripheral builds, reduces
firmware size, and avoids unneeded attempts
to send HID data.
2020-09-13 22:33:29 -04:00
Pete Johanson
e88d0833c5
fix(bluetooth): Log when clearing on start.
2020-09-13 22:33:05 -04:00
Pete Johanson
b103eb4b05
fix(bluetooth): Delete any previously stored name.
2020-09-13 22:33:05 -04:00
Pete Johanson
13842a8a1e
fix(bluetooth): Kconfig to clear bonds on start
2020-09-13 22:33:05 -04:00
Pete Johanson
fc0812bd2e
fix(bluetooth): Remove identity, minimal bt
.
...
* Simplify the `bt` behavior to one current command
`BT_CLEAR_BONDS_CMD`.
* Simplify BLE code for split and non-split keyboards.
* Remove keymap processing from split peripheral side.
2020-09-13 22:33:05 -04:00
Pete Johanson
a4d06f69ac
fix(bluetooth): Fix max pair settings for non-split.
2020-09-13 22:33:05 -04:00
Pete Johanson
cf970efb98
feat(bluetooth): Proper bond management, identity support for non-splits
...
* Add `bt` behavior that can be used to perform certain actions,
such as next/prev identity, reset identity, etc.
NOTE: Multiple identities is only supported for non-split shields,
due to missing Zephyr identity functionality for dual
central/peripheral devices.
* Proper bond reset tied to action, that honors peripheral bonds,
so folks can reset and pair to other hosts, without breaking
bonds between splt halves.
2020-09-13 22:33:05 -04:00
Pete Johanson
68e72f9275
fix: Switch to single AUTHORS file.* Closes #164
2020-09-10 10:24:23 -04:00
Pete Johanson
5005aa4cd4
Merge pull request #166 from Nicell/boards/dz60rgb
...
Add DZ60RGB Rev1 Definition
2020-09-09 23:10:22 -04:00
Cody McGinnis
a65de800bf
fix(tests): pending tests pass now
2020-09-08 12:00:46 -04:00
Nick
ceda57ddfd
Fix comment name of keyboard
2020-09-07 12:32:25 -05:00
Nick
e845995c2d
Fix Planck defconfig
2020-09-07 12:25:11 -05:00
Nick
6b433fdefd
Finish DZ60RGB board definition
2020-09-07 12:24:47 -05:00
Nick
fa40558f73
Merge commit '61b249666b13f7f356c0e77ee5eb500d672d7dce' into boards/dz60rgb
2020-09-07 12:22:18 -05:00
Pete Johanson
9475188869
Merge pull request #162 from kurtis-lew/iris
...
Update iris_right.overlay
2020-09-04 23:35:55 -04:00
kurtis-lew
4ce42350e7
Update iris_right.overlay
2020-09-04 20:28:45 -07:00
CrossR
0ede549a13
Fix Sofle build, update Intro page.
2020-09-03 22:54:06 +01:00
David Barr
8bad40282b
actually working
2020-09-03 22:02:25 +01:00
David Barr
95bb220702
now compiles, not work, baby steps
2020-09-03 14:46:54 +01:00
David Barr
4551d30769
ad cradios
2020-09-03 13:20:05 +01:00
Pete Johanson
d53a8e36ca
Merge pull request #151 from kurtis-lew/iris
...
Added Iris Shield
2020-09-02 14:07:01 -04:00
Pete Johanson
48a3729ffe
Merge pull request #146 from okke-formsma/hold-tap
...
Hold-Tap implementation
2020-09-02 13:55:26 -04:00
Okke Formsma
c9a82d71d0
fixes for feedback round 2
2020-09-02 16:41:39 +02:00
Kurtis Lew
6e8f19028a
Added copyright header to iris.keymap
2020-09-02 07:22:39 -07:00
Kurtis Lew
c2ffeb1cf4
Added Copyright Header to Kconfig.defconfig
2020-09-02 07:21:45 -07:00