zmk_mf68/app/boards/arm/bdn9
Peter Johanson 35e73d40f5 fix(boards): Enable direct polling for BDN9.
* BDN9 Rev2 requires direct polling,
  interrupts don't work as expected.
2022-03-24 03:51:08 +00:00
..
bdn9_rev2.dts feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
bdn9_rev2.keymap feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
bdn9_rev2.yaml feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
bdn9_rev2.yml refactor(boards): Add metadata for boards. 2021-09-11 00:50:36 -04:00
bdn9_rev2.zmk.yml feat: Add a few sample hardware metadata files. 2021-09-11 00:50:36 -04:00
bdn9_rev2_defconfig fix(boards): Enable direct polling for BDN9. 2022-03-24 03:51:08 +00:00
board.cmake feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
Kconfig.board feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
Kconfig.defconfig feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00
README.md feat(boards): Add BDN9 Rev2 board. 2020-12-31 14:46:15 -05:00

Building ZMK for the BDN9

Some general notes/commands for building standard BDN9 layouts from the assembly documentation.

Standard Build

west build -p -d build/bdn9 --board bdn9_rev2

Encoder Notes

If you built your BDN9 with encoders, you'll need to change the following in your local BDN9 config or add them to the end of the file.

CONFIG_EC11=y
CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y

Then, you'll want to uncomment the necessary encoder lines in your bdn9_rev2.keymap:

&sensors {
     status = "okay";
     sensors = <&left_encoder &mid_encoder &right_encoder>;
};

&left_encoder { status = "okay"; };
&mid_encoder { status = "okay"; };
&right_encoder { status = "okay"; };

And then add the correct sensor-bindings array to each keymap layer, e.g.:

sensor-bindings = <&inc_dec_kp PG_UP PG_DN &inc_dec_kp M_VOLU M_VOLD &inc_dec_kp C_PREV C_NEXT>;