/* * Copyright (c) 2020 The ZMK Contributors * * SPDX-License-Identifier: MIT */ #include / { kscan0: kscan { compatible = "zmk,kscan-gpio-matrix"; label = "KSCAN"; diode-direction = "row2col"; row-gpios = <&pro_micro_d 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_d 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_d 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_d 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_d 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> ; col-gpios = <&pro_micro_a 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_a 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_a 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> , <&pro_micro_a 0 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> ; }; default_transform: keymap_transform_0 { compatible = "zmk,matrix-transform"; columns = <4>; rows = <5>; map = < RC(0,1) RC(0,2) RC(0,3) RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(4,0) RC(4,1) RC(4,2) RC(4,3) >; }; encoder_1_top_row: encoder_1_top_row { compatible = "alps,ec11"; label = "Top Row Encoder"; a-gpios = <&pro_micro_d 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; b-gpios = <&pro_micro_d 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; resolution = <4>; status = "disabled"; }; encoder_1: encoder_1 { compatible = "alps,ec11"; label = "Encoder 1"; a-gpios = <&pro_micro_d 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; b-gpios = <&pro_micro_d 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; resolution = <4>; status = "disabled"; }; encoder_2: encoder_2 { compatible = "alps,ec11"; label = "Encoder 2"; a-gpios = <&pro_micro_d 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; b-gpios = <&pro_micro_d 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; resolution = <4>; status = "disabled"; }; encoder_3: encoder_3 { compatible = "alps,ec11"; label = "Encoder 3"; a-gpios = <&pro_micro_d 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; b-gpios = <&pro_micro_d 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; resolution = <4>; status = "disabled"; }; encoder_4: encoder_4 { compatible = "alps,ec11"; label = "Encoder 4"; a-gpios = <&pro_micro_d 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; b-gpios = <&pro_micro_d 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; resolution = <4>; status = "disabled"; }; chosen { zmk,kscan = &kscan0; zmk,matrix_transform = &default_transform; }; }; &pro_micro_i2c { status = "okay"; oled: ssd1306@3c { compatible = "solomon,ssd1306fb"; reg = <0x3c>; label = "DISPLAY"; width = <128>; height = <32>; segment-offset = <0>; page-offset = <0>; display-offset = <0>; multiplex-ratio = <31>; segment-remap; com-invdir; com-sequential; prechargep = <0x22>; }; };