# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT

mainmenu "ZMK Firmware"

menu "ZMK"

menu "Basic Keyboard Setup"

config ZMK_KEYBOARD_NAME
	string "Keyboard Name"

config USB_DEVICE_PRODUCT
	default ZMK_KEYBOARD_NAME

config BT_DEVICE_NAME
	default ZMK_KEYBOARD_NAME

config USB_DEVICE_VID
	default 0x1D50

config USB_DEVICE_PID
	default 0x615E

config USB_DEVICE_MANUFACTURER
	default "ZMK Project"

config BT_DIS_PNP_VID
	default 0x1D50

config BT_DIS_PNP_PID
	default 0x615E

config BT_DIS_MODEL
	default ZMK_KEYBOARD_NAME

config BT_DIS_MANUF
	default "ZMK Project"

menu "HID"

choice ZMK_HID_REPORT_TYPE
	prompt "HID Report Type"

config ZMK_HID_REPORT_TYPE_HKRO
	bool "#-Key Roll Over (HKRO) HID Report"
	help
	  Enable # key roll over for HID report. This selection is "boot keyboard" compatible
	  but limits the total number of possible keys to report as held to #.

config ZMK_HID_REPORT_TYPE_NKRO
	bool "Full N-Key Roll Over (NKRO) HID Report"
	help
	  Enable full N-Key Roll Over for HID output. This selection will prevent the keyboard
	  from working with some BIOS/UEFI versions that only support "boot keyboard" support.
	  This option also prevents using some infrequently used higher range HID usages.

endchoice

if ZMK_HID_REPORT_TYPE_HKRO

config ZMK_HID_KEYBOARD_REPORT_SIZE
	int "# Keyboard Keys Reportable"
	default 6

endif

config ZMK_HID_CONSUMER_REPORT_SIZE
	int "# Consumer Keys Reportable"
	default 6


choice ZMK_HID_CONSUMER_REPORT_USAGES
	prompt "HID Report Type"

config ZMK_HID_CONSUMER_REPORT_USAGES_FULL
	bool "Full Consumer HID Usage Support"
	help
	  Enable full Consumer usage ID values to be sent to hosts. Allows for less
	  frequently used usages, but has compatibability issues with some host OSes.

config ZMK_HID_CONSUMER_REPORT_USAGES_BASIC
	bool "Basic Consumer HID Usage Support"
	help
	  Enable Consumer usage ID values up to "Playback Speed - Slow" to be sent to
	  hosts. Allows for broader compatibability with more host OSes.

endchoice

menu "Output Types"

config ZMK_USB
	bool "USB"
	select USB
	select USB_DEVICE_STACK
	select USB_DEVICE_HID

if ZMK_USB

config USB_NUMOF_EP_WRITE_RETRIES
	default 10

config USB_HID_POLL_INTERVAL_MS
	default 1

#ZMK_USB
endif

menuconfig ZMK_BLE
	bool "BLE (HID over GATT)"
	select BT
	select BT_SMP
	select BT_SMP_SC_PAIR_ONLY
	select BT_SMP_APP_PAIRING_ACCEPT
	select BT_PERIPHERAL
	select BT_DIS
	select BT_BAS
	select BT_SETTINGS
	select SETTINGS

if ZMK_BLE

config SYSTEM_WORKQUEUE_STACK_SIZE
	default 2048

config ZMK_BLE_THREAD_STACK_SIZE
	int "BLE notify thread stack size"
	default 512

config ZMK_BLE_THREAD_PRIORITY
	int "BLE notify thread priority"
	default 5

config ZMK_BLE_KEYBOARD_REPORT_QUEUE_SIZE
	int "Max number of keyboard HID reports to queue for sending over BLE"
	default 20

config ZMK_BLE_CONSUMER_REPORT_QUEUE_SIZE
	int "Max number of consumer HID reports to queue for sending over BLE"
	default 5

config ZMK_BLE_CLEAR_BONDS_ON_START
	bool "Configuration that clears all bond information from the keyboard on startup."
	default n

# HID GATT notifications sent this way are *not* picked up by Linux, and possibly others.
config BT_GATT_NOTIFY_MULTIPLE
	default n

config BT_GATT_AUTO_SEC_REQ
	default n

config BT_DEVICE_APPEARANCE
	default 961

config ZMK_BLE_PASSKEY_ENTRY
	bool "Experimental: Requiring typing passkey from host to pair BLE connection"
	default n

config BT_PERIPHERAL_PREF_MIN_INT
	default 6

config BT_PERIPHERAL_PREF_MAX_INT
	default 12

config BT_PERIPHERAL_PREF_LATENCY
	default 30

config BT_PERIPHERAL_PREF_TIMEOUT
	default 400

#ZMK_BLE
endif

#Output Types
endmenu

# HID
endmenu

rsource "src/split/Kconfig"

#Basic Keyboard Setup
endmenu

menu "Display/LED Options"

rsource "src/display/Kconfig"

menuconfig ZMK_RGB_UNDERGLOW
	bool "RGB Adressable LED Underglow"
	select LED_STRIP

if ZMK_RGB_UNDERGLOW

# This default value cuts down on tons of excess .conf files, if you're using GPIO, manually disable this
config SPI
	default y

config ZMK_RGB_UNDERGLOW_EXT_POWER
	bool "RGB underglow toggling also controls external power"
	default y

config ZMK_RGB_UNDERGLOW_BRT_MIN
	int "RGB underglow minimum brightness in percent"
	range 0 100
	default 0

config ZMK_RGB_UNDERGLOW_BRT_MAX
	int "RGB underglow maximum brightness in percent"
	range ZMK_RGB_UNDERGLOW_BRT_MIN 100
	default 100

config ZMK_RGB_UNDERGLOW_HUE_STEP
	int "RGB underglow hue step in degrees"
	range 0 359
	default 10

config ZMK_RGB_UNDERGLOW_SAT_STEP
	int "RGB underglow saturation step in percent"
	range 0 100
	default 10

config ZMK_RGB_UNDERGLOW_BRT_STEP
	int "RGB underglow brightness step in percent"
	range 0 100
	default 10

config ZMK_RGB_UNDERGLOW_HUE_START
	int "RGB underglow start hue value in degrees"
	range 0 359
	default 0

config ZMK_RGB_UNDERGLOW_SAT_START
	int "RGB underglow start saturations value in percent"
	range 0 100
	default 100

config ZMK_RGB_UNDERGLOW_BRT_START
	int "RGB underglow start brightness value in percent"
	range ZMK_RGB_UNDERGLOW_BRT_MIN ZMK_RGB_UNDERGLOW_BRT_MAX
	default ZMK_RGB_UNDERGLOW_BRT_MAX

config ZMK_RGB_UNDERGLOW_SPD_START
	int "RGB underglow start animation speed value"
	range 1 5
	default 3

config ZMK_RGB_UNDERGLOW_EFF_START
	int "RGB underglow start effect int value related to the effect enum list"
	range 0 3
	default 0

config ZMK_RGB_UNDERGLOW_ON_START
	bool "RGB underglow starts on by default"
	default y

config ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE
	bool "Turn off RGB underglow when keyboard goes into idle state"

config ZMK_RGB_UNDERGLOW_AUTO_OFF_USB
	bool "Turn off RGB underglow when USB is disconnected"
	depends on USB_DEVICE_STACK

#ZMK_RGB_UNDERGLOW
endif

menuconfig ZMK_BACKLIGHT
	bool "LED backlight"
	select LED

if ZMK_BACKLIGHT

config ZMK_BACKLIGHT_BRT_STEP
	int "Brightness step in percent"
	range 1 100
	default 20

config ZMK_BACKLIGHT_BRT_START
	int "Default brightness in percent"
	range 1 100
	default 40

config ZMK_BACKLIGHT_ON_START
	bool "Default backlight state"
	default y

config ZMK_BACKLIGHT_AUTO_OFF_IDLE
	bool "Turn off backlight when keyboard goes into idle state"

config ZMK_BACKLIGHT_AUTO_OFF_USB
	bool "Turn off backlight when USB is disconnected"

#ZMK_BACKLIGHT
endif

#Display/LED Options
endmenu

menu "Power Management"

config ZMK_IDLE_TIMEOUT
	int "Milliseconds of inactivity before entering idle state (OLED shutoff, etc)"
	default 30000

config ZMK_SLEEP
	bool "Enable deep sleep support"
	imply USB

if ZMK_SLEEP

config PM_DEVICE
	default y

config ZMK_IDLE_SLEEP_TIMEOUT
	int "Milliseconds of inactivity before entering deep sleep"
	default 900000

#ZMK_SLEEP
endif

config ZMK_EXT_POWER
	bool "Enable support to control external power output"
	default y

#Power Management
endmenu

menu "Combo options"

config ZMK_COMBO_MAX_PRESSED_COMBOS
	int "Maximum number of currently pressed combos"
	default 4

config ZMK_COMBO_MAX_COMBOS_PER_KEY
	int "Maximum number of combos per key"
	default 5

config ZMK_COMBO_MAX_KEYS_PER_COMBO
	int "Maximum number of keys per combo"
	default 4

#Combo options
endmenu

menu "Behavior Options"

config ZMK_BEHAVIORS_QUEUE_SIZE
	int "Maximum number of behaviors to allow queueing from a macro or other complex behavior"
	default 64

DT_COMPAT_ZMK_BEHAVIOR_KEY_TOGGLE := zmk,behavior-key-toggle

config ZMK_BEHAVIOR_KEY_TOGGLE
        bool
        default $(dt_compat_enabled,$(DT_COMPAT_ZMK_BEHAVIOR_KEY_TOGGLE))

endmenu

menu "Advanced"

menu "Initialization Priorities"

if USB_DEVICE_STACK

config ZMK_USB_INIT_PRIORITY
	int "USB Init Priority"
	default 50

#USB
endif

if ZMK_BLE || ZMK_SPLIT_BLE

config ZMK_BLE_INIT_PRIORITY
	int "BLE Init Priority"
	default 50

#ZMK_BLE || ZMK_SPLIT_BLE
endif

#Initialization Priorities
endmenu

menu "KSCAN Settings"

config ZMK_KSCAN_EVENT_QUEUE_SIZE
	int "Size of the event queue for KSCAN events to buffer events"
	default 4

#KSCAN Settings
endmenu

menu "USB Logging"

config ZMK_USB_LOGGING
	bool "Enable USB CDC ACM logging to help debug"
	select LOG
	select USB
	select USB_DEVICE_STACK
	select USB_CDC_ACM
	select SERIAL
	select CONSOLE
	select UART_INTERRUPT_DRIVEN
	select UART_LINE_CTRL
	select UART_CONSOLE
	select USB_UART_CONSOLE

if ZMK_USB_LOGGING

config ZMK_LOG_LEVEL
	default 4

# We do this to avoid log loop where logging to USB generates more log messages.
config USB_CDC_ACM_LOG_LEVEL
	default 1

config USB_CDC_ACM_RINGBUF_SIZE
	default 1024

config LOG_BUFFER_SIZE
	default 8192

config LOG_STRDUP_BUF_COUNT
	default 16

config LOG_PROCESS_THREAD_STARTUP_DELAY_MS
	default 1000

#ZMK_USB_LOGGING
endif

#USB Logging
endmenu

if SETTINGS

config ZMK_SETTINGS_SAVE_DEBOUNCE
	int "Milliseconds to debounce settings saves"
	default 60000

#SETTINGS
endif

config ZMK_BATTERY_REPORT_INTERVAL
	depends on ZMK_BLE
	int "Battery level report interval in seconds"
	default 60

#Advanced
endmenu

#ZMK
endmenu

config HEAP_MEM_POOL_SIZE
	default 8192

config KERNEL_BIN_NAME
	default "zmk"

config REBOOT
	default y

config USB_DEVICE_STACK
	default y if HAS_HW_NRF_USBD

config ZMK_WPM
	bool "Calculate WPM"
	default n

config SENSOR
	default y

choice CBPRINTF_IMPLEMENTATION
	default CBPRINTF_NANO

endchoice

module = ZMK
module-str = zmk
source "subsys/logging/Kconfig.template.log_config"

rsource "boards/Kconfig"
rsource "boards/shields/*/Kconfig.defconfig"
rsource "boards/shields/*/Kconfig.shield"

osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.defconfig"
osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.shield"


source "Kconfig.zephyr"