Silences the following build warning ...
../src/ble.c:407:13: warning: 'auth_passkey_display' defined but not used [-Wunused-function]
407 | static void auth_passkey_display(struct bt_conn *conn, unsigned int passkey) {
fix: clang-format and setting state variable
fix: Fix startup settings configuration
fix(ext_power): Add static to state
fix(ext_power): Set default settings value
Use driver data status instead of global file state
The application usage used by report 1 is `HID_USAGE_GD_KEYBOARD`. Moreover, the `keys` usage page (0x07) that primarily feeds into this report is predominantly keyboard codes. The rest of the system should align with this naming convention.
Key release events released keys on the wrong layer if the 'top layer'
was not &trans above the &mo key.
base <&mo 1>
layer 1 <&kp B>
This was caused by overwriting
`zmk_keymap_active_behavior_layer[position]` after the &mo key was
handled.
Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.
Added a new behavior to control this setting. It supports commands:
&end END_USB - Prefer USB output
&end END_BLE - Prefer BLE output
&end END_TOG - Toggle between USB and BLE
Added zmk_ble_active_profile_is_connected() to allow code outside ble.c to check
the status of the active profile, and changed the ble_active_profile_changed
event to also notify when the active profile connects or disconnects.
Changed endpoint selection to to also update when the active profile changes,
connects, or disconnects.
This prevents stuck keys when switching endpoints by clearing
everything in the HID report and sending one last report before
switching to the new endpoint.
Added some utility functions and an event for tracking the state of the
USB connection.
Updated endpoints.c to select a single endpoint to send HID reports to
based on the status of the USB and BLE connections. Partially fixes#206.
Future commits will add a user setting to control which endpoint is used if
both USB and BLE are ready.
This is necessary for testing a large number of events (e.g. every key code) within a single build/pass.
The u8_t limitation became apparent during end-to-end testing of #21.
* Add timestamps to position events and behaviors.
- Take original event timestamps into consideration so nested tap-holds have proper timing.
- Add position and timestamp to keycode state changed event so the one-shot behavior can properly identify other keypresses and timings.
- Add timestamp to position events received from peripheral
* reduce number of arguments to behaviors
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
* New ZMK_SLEEP Kconfig symbol to enable the functionality.
* Switch to PORT events that allows wake from deep sleep.
* Initial basic power management policy, with idle ms,
and ignoring deep sleep if we detect a USB connection.
* Add back in profiles, not using Zephyr
BT identity infrastructure.
* Restore additional `&bt` commands for profile
operations.
* Fix for split pairing and subscriptions, since
Zephyr persists subscriptions across connects.
* Remove keymap from peripheral builds, reduces
firmware size, and avoids unneeded attempts
to send HID data.
* Simplify the `bt` behavior to one current command
`BT_CLEAR_BONDS_CMD`.
* Simplify BLE code for split and non-split keyboards.
* Remove keymap processing from split peripheral side.
* Add `bt` behavior that can be used to perform certain actions,
such as next/prev identity, reset identity, etc.
NOTE: Multiple identities is only supported for non-split shields,
due to missing Zephyr identity functionality for dual
central/peripheral devices.
* Proper bond reset tied to action, that honors peripheral bonds,
so folks can reset and pair to other hosts, without breaking
bonds between splt halves.
* Especially for splits, we need the ability to
unpair all paired devices as sledgehammer
if we need to "reset things", and doing so via
keymaps isn't suitable.
* Allows shields to define a collection of key
positions that if all held 2 seconds after
startup, will unpair all existing pairs for the
device.
* If you press a key with a layer active, then
deactivate the layer (e.g. releasing a `&mo`,
then release the key, we currently may send
the wrong key release event.
* Fixes#67.
* Track active mods when mods or keycode
events occur.
* Use the tracked mods when releasing or
generating keycode events.
* Track pending/used status in one array, for
improved storage efficency.
* Service for split peripheral to report
position state to split central.
* Updated advertising info.
* Behavior for split BT until we have a proper
event system.
* Add initial event manager implementation,
roughly mimicking Nordic's API.
* Add `position_state_changed` and
`keycode_state_changed` events.
* Hook up HID and keymap to new events
instead of using behaviour global event
crazy.
* Refactor Kyria into separate left/right "revisions"
of the Kyria shield, and include central
kyria.dtsi file with common definition.
* Fixes for keymaps to work fully with matrix
transforms that override effective rows/columns.
* Add ability for matrix transform to do row/col
offsets, which is needed for split keyboards.
