* Remove MISO pin from pinctrl for BDN9 rev2 board, to avoid
the 4th switch being set up for an alternate function, which
was causing spurious key press events to be triggered.
CONFIG_ZMK_BATTERY_NRF_VDDH and CONFIG_ZMK_BATTERY_VOLTAGE_DIVIDER are
now automatically enabled if a DT node with the matching "compatible"
property is present and enabled, so they no longer need to be manually
set for each board.
The key scanning drivers are now automatically enabled when a DT node
with the matching "compatible" property is present and enabled, so they
no longer need to be manually set for each board.
battery.c now uses the zmk,battery chosen node to select a battery
sensor. Using the node labeled "BATTERY" is maintained for backwards
compatibility but is now deprecated. Custom boards should switch to
using the chosen node.
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
# app/boards/arm/nice60/nice60.dts
# app/boards/arm/nrfmicro/nrfmicro_13.dts
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
* Document the Seeed(uino) XIAO interconnect
* Add metadata files for two upstream boards, XIAO and XIAO BLE.
* Add conf and overlay files to properly configure the boards
for ZMK use.
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
This commit fixes the pin definition for BlueMicro840. Based on the
schematics, the blue led is at pin 1.10.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
Aligns *.h and *.c to underscore naming convention.
These were kept (with warnings) for backwards compatibility with external boards/shields:
- kscan-mock.h
- matrix-transform.h
They should be removed in the future.
PR: #523
