The application usage used by report 1 is `HID_USAGE_GD_KEYBOARD`. Moreover, the `keys` usage page (0x07) that primarily feeds into this report is predominantly keyboard codes. The rest of the system should align with this naming convention.
Key release events released keys on the wrong layer if the 'top layer'
was not &trans above the &mo key.
base <&mo 1>
layer 1 <&kp B>
This was caused by overwriting
`zmk_keymap_active_behavior_layer[position]` after the &mo key was
handled.
Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.
Added a new behavior to control this setting. It supports commands:
&end END_USB - Prefer USB output
&end END_BLE - Prefer BLE output
&end END_TOG - Toggle between USB and BLE
Added zmk_ble_active_profile_is_connected() to allow code outside ble.c to check
the status of the active profile, and changed the ble_active_profile_changed
event to also notify when the active profile connects or disconnects.
Changed endpoint selection to to also update when the active profile changes,
connects, or disconnects.
This prevents stuck keys when switching endpoints by clearing
everything in the HID report and sending one last report before
switching to the new endpoint.
Added some utility functions and an event for tracking the state of the
USB connection.
Updated endpoints.c to select a single endpoint to send HID reports to
based on the status of the USB and BLE connections. Partially fixes#206.
Future commits will add a user setting to control which endpoint is used if
both USB and BLE are ready.
This is necessary for testing a large number of events (e.g. every key code) within a single build/pass.
The u8_t limitation became apparent during end-to-end testing of #21.
* Add timestamps to position events and behaviors.
- Take original event timestamps into consideration so nested tap-holds have proper timing.
- Add position and timestamp to keycode state changed event so the one-shot behavior can properly identify other keypresses and timings.
- Add timestamp to position events received from peripheral
* reduce number of arguments to behaviors
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
* New ZMK_SLEEP Kconfig symbol to enable the functionality.
* Switch to PORT events that allows wake from deep sleep.
* Initial basic power management policy, with idle ms,
and ignoring deep sleep if we detect a USB connection.
