* Add blackbill interconnect metadata.
* Add config/overlay for upstream blackpill boards to work with ZMK.
* Add pillbug board.
* Updated new shield docs.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Added overlays to support building for the nRF5340 development kit.
Also added some documentation on how to build and flash ZMK for dual-
chip Bluetooth configurations, with an example for the nRF5340.
* Update docs for mod-morph
* Add unit tests for mod-morph
* Add keep-mods to DT binding
Co-authored-by: Martin Aumüller <aumuell@reserv.at>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Update planck_rev6.keymap
Third layer was causing problems so i moved reset and bootloader to second layer
* BT_sel functions
A customer requested this so we added it
* Update crbn.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
All credit for this one goes to @xudongzheng (thanks for helping debug
this!). Should fix the issue where keyboards go unresponsive after their
host machine wakes from sleep due to the USB driver entering an error
state. I was able to both reliably reproduce the issue before the patch
goes in and confirmed it no longer occurs post patch.
The `USB_DC_RESUME` state indicates the host event has resumed the connection.
Adding it to the list of valid connection states to prevent the error
when waking from sleep.
Zephyr API Link:
https://docs.zephyrproject.org/apidoc/latest/group____usb__device__controller__api.html#gac09e3e0af1a2b41a5bfbad91f900baf7fixes#1372
* This is a very simple fix to a rather complicated issue. Essentially,
hold-taps will "release" (raise) their captured keys before actually
telling the event manager they have captured a key. This means the event
manager ends up assigning the `last_listener_index` to the hold-tap
subscription rather than the combo. So when the combo calls
`ZMK_EVENT_RELEASE` it raises after the hold-tap instead of after the
combo as the combo code expects.
* The corresponding test (which fails without this change) has also been added.
* An event can be captured and released in the same event handler, before
the last_listener_index would have been updated. This causes some handlers
to be triggered multiple times.
* The solution is to update the last_listener_index before calling the next
event handler, so capturing and releasing within an event handler is harmless.
* Also see discussion at https://github.com/zmkfirmware/zmk/pull/1401
* If our handler dedides our undedided hold-tap,
return early before continuing.
* Fix incorrect pointer logic, resulting in combo
candidate filtering leaving incorrect timeout details.
Co-authored-by: Andrew Rae <ajrae.nv@gmail.com>
Co-authored-by: okke <okke@formsma.nl>
* add support for Spaceman Pancake
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
Co-authored-by: Jason Hazel <jhazel@matrixmediaservices.com>
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
Add optional Kconfig setting to delay scanning after each
output column is set, and inputs are read, to allow inputs
to "settle" after the last column is set back to inactive.
Two new options for functionality to enable/disable RGB for
USB status or idle events.
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
Co-authored-by: ReFil <harryherring@gmail.com>
Paul Warren
JW2586
Joel Spadin
Kyle McCreery
Pavlos Vinieratos
Peter Johanson
Cem Aksoylar
Albert Y
Xudong Zheng
jhorology
Okke Formsma
HookyQR
Jay Greco
Nick Winans
ebastler
Robert U
Pavel Glushkov
zhiayang
Nick Winans
ReFil
John Drogo
Ben
Elliot Pahl
Shreyas
Jason Hazel
Nick Conway
Kurtis Lew
ReFil