Initial user setup docs, setup script fixes.

docs/docs/user-setup.md

@@ -0,0 +1,147 @@
+---
+id: user-setup
+title: Installing ZMK
+sidebar_label: Installing ZMK
+---
+
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+
+Unless other keyboard firmwares, ZMK Firmware has been built from the ground up to allow users to manage
+their own keyboard configurations, including keymaps, specific hardware details, etc. all outside of the
+core ZMK Firmware source repository.
+
+In addition to this, a focus has been made on avoiding requiring end users who don't intend to develop
+new ZMK features from having to install a plethora of complicated dependencies just to use ZMK.
+
+## Summary
+
+The following steps can be taken to obtain an installable firmware image for your device, without the need
+to install any compiler or specialized toolchain. This is possible by leveraging [GitHub Actions](https://github.com/features/actions)
+to build your firmware for you in the cloud, which you can then download and flash to your device.
+
+Following the steps in this guide, you will:
+
+1. Create a new repository in GitHub that will contain your user config.
+1. Download and run a small shell script that will automate most of the setup. The script will:
+   1. Prompt you for which board (e.g. nice!nano) and shield (e.g. Lily58 or Kyria) you want to create a configuration for.
+   1. Prompt you for your GitHub username and repo where the config should be pushed.
+   1. Use `git` to clone a template repository that will be the basis for your user's config repository.
+   1. Use the given board and shield to update the included GitHub Action to build for the correct hardware.
+   1. Commit the initial version.
+   1. (If info was provided) Push the local repo to your GitHub repository.
+1. Add your own keymap overlay (`keymap.overlay`) file to the repository, and change your keymap.
+1. Update the configuration flags for your user config, to enable/disable any ZMK features you would like to include.
+1. Commit and push the updates to trigger a new GitHub Action run.
+
+## Prerequisites
+
+The remainder of this guide assumes the following prequisites:
+
+1. You have an active, working [GitHub](https://github.com/) account.
+1. You have installed and configured the [`git`](https://git-scm.com/) version control tool.
+
+## GitHub Repo
+
+Before running the setup script, you will first need to create a new GitHub repository to host the config.
+
+1. Navigate to [https://github.com/new](https://github.com/new)
+1. When prompted for the repo name, enter `zmk-config`.
+1. The repository can be public or private
+1. Do **not** check any of the options to initialize the repository with a README or other files.
+1. Click "Create repository"
+
+## User Config Setup Script
+
+To start the setup process, run the following from your command line prompt:
+
+<Tabs
+defaultValue="curl"
+values={[
+{label: 'Using curl', value: 'curl'},
+{label: 'Using wget', value: 'wget'},
+]}>
+<Tab value="curl">
+
+```
+sh -c "$(curl -fsSL https://zmkfirmware.dev/setup.sh)"
+```
+
+</Tab>
+<Tab value="wget">
+
+```
+sh -c "$(wget https://zmkfirmware.dev/setup.sh -O -)"
+```
+
+</Tab>
+</Tabs>
+
+### MCU Board Selection
+
+When prompted, enter the number for the corresponding MCU board you would like to target:
+
+```
+MCU Board Selection:
+1) nice!nano
+2) QMK Proton-C
+3) Quit
+Pick an MCU board:
+```
+
+### Keyboard Shield Selection
+
+When prompted, enter the number for the corresponding keyboard shield you would like to target:
+
+```
+Keyboard Shield Selection:
+1) Kyria
+2) Lily58
+3) Quit
+Pick an keyboard:
+```
+
+### GitHub Details
+
+In order to have your new configuration automatically pushed, and then built using GitHub Actions, enter
+some information about your particular GitHub info:
+
+```
+GitHub Username (leave empty to skip GitHub repo creation): petejohanson
+GitHub Repo Name [zmk-config]:
+GitHub Repo [https://github.com/petejohanson/zmk-config.git]:
+```
+
+Only the GitHub username is required; if you are happy with the defaults offered in the square brackets, you can simply hit `Enter`.
+
+### Confirming Selections
+
+The setup script will confirm all of your selections one last time, before performing the setup:
+
+```
+Preparing a user config for:
+* MCU Board: nice_nano
+* Shield: kyria
+* GitHub Repo To Push (please create this in GH first!): https://github.com/petejohanson/zmk-config.git
+
+Continue? [Yn]:
+```
+
+After hitting `Enter` or typing `y`, the script will create an initial config in a directory named after the repo name,
+update the GitHub Action YAML file, commit the initial version, and then push to your repo.
+
+:::info
+
+If you used the default GitHub repo URL using the `https://` scheme, you may be prompted for your username + password in order to
+push the initial commit.
+
+:::
+
+## Accessing Built Firmware
+
+Once the setup script is complete and the new user config repository has been pushed, GitHub will automatically run the action
+to build your keyboard firmware files. You can view the actions by clicking on the "Actions" tab on your GitHub repository.
+
+## Keymap Changes
+
+TODO: Document how to add your own keymap!

docs/sidebars.js

@@ -1,6 +1,6 @@
 module.exports = {
   someSidebar: {
-    "Getting Started": ["intro", "faq", "hardware"],
+    "Getting Started": ["intro", "hardware", "user-setup", "faq"],
     Development: [
       "dev-clean-room",
       "dev-setup",

docs/static/setup.sh

@@ -39,6 +39,8 @@ prompt="Pick an keyboard:"
 options=("Kyria" "Lily58")
 
 PS3="$prompt "
+# TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
+# select opt in "${options[@]}" "Other" "Quit"; do 
 select opt in "${options[@]}" "Other" "Quit"; do 
 
     case "$REPLY" in
@@ -47,8 +49,8 @@ select opt in "${options[@]}" "Other" "Quit"; do
     2 ) shield_title="Lily58" shield="lily58"; split="y"; break;;
 
     # Add link to docs on adding your own custom shield in your ZMK config!
-    $(( ${#options[@]}+1 )) ) echo "Other!"; break;; 
+    # $(( ${#options[@]}+1 )) ) echo "Other!"; break;; 
-    $(( ${#options[@]}+2 )) ) echo "Goodbye!"; exit;;
+    $(( ${#options[@]}+1 )) ) echo "Goodbye!"; exit;;
     *) echo "Invalid option. Try another one.";continue;;
 
     esac
@@ -101,4 +103,9 @@ git commit -m "Initial User Config."
 if [ -n "$github_repo" ]; then
 	git remote add origin "$github_repo"
 	git push --set-upstream origin $(git branch --show-current)
+
+    # TODO: Support determing the actions URL when non-https:// repo URL is used.
+    if [ "${github_repo}" != "${github_repo#https://}" ]; then
+        echo "Your firmware should be available from the GitHub Actions shortly: ${github_url%.git}/actions"
+    fi
 fi