The inaugural commit for Leeloo's firmware.

This commit is contained in:
ClicketySplit 2022-03-08 22:30:30 -07:00 committed by Nick Winans
parent 35e73d40f5
commit ab5517b858
12 changed files with 365 additions and 0 deletions

View file

@ -0,0 +1,55 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if SHIELD_LEELOO_LEFT
config ZMK_KEYBOARD_NAME
default "Leeloo"
config ZMK_SPLIT_BLE_ROLE_CENTRAL
default y
endif
if SHIELD_LEELOO_LEFT || SHIELD_LEELOO_RIGHT
config ZMK_SPLIT
default y
if ZMK_DISPLAY
config I2C
default y
config SSD1306
default y
config SSD1306_REVERSE_MODE
default y
endif # ZMK_DISPLAY
if LVGL
config LVGL_HOR_RES_MAX
default 128
config LVGL_VER_RES_MAX
default 32
config LVGL_VDB_SIZE
default 64
config LVGL_DPI
default 148
config LVGL_BITS_PER_PIXEL
default 1
choice LVGL_COLOR_DEPTH
default LVGL_COLOR_DEPTH_1
endchoice
endif # LVGL
endif

View file

@ -0,0 +1,8 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config SHIELD_LEELOO_LEFT
def_bool $(shields_list_contains,leeloo_left)
config SHIELD_LEELOO_RIGHT
def_bool $(shields_list_contains,leeloo_right)

View file

@ -0,0 +1,42 @@
# Clickety Split | Leeloo
![Leeloo](https://cdn.shopify.com/s/files/1/0599/3460/5491/files/Leeloo-rev1.0-w.jpg?v=1646798726)
Keyboard Designer: [clicketysplit.ca](https://clicketysplit.ca)
GitHub: [ClicketySplit](https://github.com/ClicketySplit)
Hardware Supported: Pro Micro, Elite-C, nice!nano v2
Albeit, there is no doubt where Leeloo's heritage is derived from—Lily58, and Corne. It is not a copy-paste-modify implementation.
Leeloo has been designed from scratch; everything from the schematic to its PCB footprints, and column stagger. There are some subtle differences that may not be apparent; however, its subtle changes enable an interesting future.
Features:
* 4x6x5m Split Keyboard
* Support for MX/Box or Low Profile Choc switches.
* 90% of the switches are socketed; with the exception to the rotary encoder positions—6 positions require soldering.
* Support for 128x32 OLED Displays.
* The option to select one of three positions for an EC11 rotary encoder on each half.
* Support for Alps Alpine Micro Switch
* Support for 3.7v 301230 LiPo Battery
# Building Your Firmware
ZMK Firmware: [Introduction to ZMK](https://zmk.dev/docs/)
Installation: [Installing ZMK](https://zmk.dev/docs/user-setup)
Customization: [Customizing ZMK](https://zmk.dev/docs/customization)
Development Environment: [Basic Setup](https://zmk.dev/docs/development/setup)
Build command for the default keymap of Leeloo:
west build -d build/left -p -b nice_nano_v2 -- -DSHIELD=leeloo_left
west build -d build/right -p -b nice_nano_v2 -- -DSHIELD=leeloo_right
Build command for your custom keymap of Leeloo:
west build -d build/right -p -b nice_nano_v2 -- -DSHIELD=leeloo_right -DZMK_CONFIG="C:\dev\zmk\[yourNmae]\leeloo\config"
west build -d build/left -p -b nice_nano_v2 -- -DSHIELD=leeloo_left -DZMK_CONFIG="C:\dev\zmk\[yourName]\leeloo\config"
# Support
If you have any questions with regards to Leeloo, please [Contact Us](https://clicketysplit.ca/pages/contact-us).
Clickety Split
For the love of split keyboards.

View file

@ -0,0 +1,29 @@
&spi1 {
compatible = "nordic,nrf-spim";
/* Cannot be used together with i2c0. */
status = "okay";
mosi-pin = <6>;
// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
sck-pin = <5>;
miso-pin = <7>;
led_strip: ws2812@0 {
compatible = "worldsemi,ws2812-spi";
label = "SK6812mini";
/* SPI */
reg = <0>; /* ignored, but necessary for SPI bindings */
spi-max-frequency = <4000000>;
/* WS2812 */
chain-length = <6>; /* There are per-key RGB, but the first 6 are underglow */
spi-one-frame = <0x70>;
spi-zero-frame = <0x40>;
};
};
/ {
chosen {
zmk,underglow = &led_strip;
};
};

View file

@ -0,0 +1,9 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
# Uncomment the following line to enable the OLED Display
# CONFIG_ZMK_DISPLAY=y
# Uncomment these two lines to add support for encoders
# CONFIG_EC11=y
# CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y

View file

@ -0,0 +1,86 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix_transform.h>
/ {
chosen {
zmk,kscan = &kscan0;
zmk,matrix_transform = &default_transform;
};
default_transform: keymap_transform_0 {
compatible = "zmk,matrix-transform";
columns = <12>;
rows = <5>;
// | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | | SW6 | SW5 | SW4 | SW3 | SW2 | SW1 |
// | SW7 | SW8 | SW9 | SW10 | SW11 | SW12 | | SW12 | SW11 | SW10 | SW9 | SW8 | SW7 |
// | SW13 | SW14 | SW15 | SW16 | SW17 | SW18 | | SW18 | SW17 | SW16 | SW15 | SW14 | SW13 |
// | SW19 | SW20 | SW21 | SW22 | SW23 | SW24 | SW29 | | SW29 | SW24 | SW23 | SW22 | SW21 | SW20 | SW19 |
// | SW25 | SW26 | SW27 | SW28 | | SW28 | SW27 | SW26 | SW25 |
map = <
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11)
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11)
RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8) RC(3,9) RC(3,10) RC(3,11)
RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,7) RC(4,8) RC(4,9) RC(4,10)
>;
};
kscan0: kscan {
compatible = "zmk,kscan-gpio-matrix";
label = "KSCAN";
diode-direction = "col2row";
row-gpios
= <&pro_micro 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
left_encoder: encoder_left {
compatible = "alps,ec11";
label = "LEFT_ENCODER";
a-gpios = <&pro_micro 21 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 20 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
resolution = <4>;
};
right_encoder: encoder_right {
compatible = "alps,ec11";
label = "RIGHT_ENCODER";
a-gpios = <&pro_micro 20 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
b-gpios = <&pro_micro 21 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
resolution = <4>;
};
sensors {
compatible = "zmk,keymap-sensors";
sensors = <&left_encoder &right_encoder>;
};
};
&pro_micro_i2c {
status = "okay";
oled: ssd1306@3c {
compatible = "solomon,ssd1306fb";
reg = <0x3c>;
label = "DISPLAY";
width = <128>;
height = <32>;
segment-offset = <0>;
page-offset = <0>;
display-offset = <0>;
multiplex-ratio = <31>;
segment-remap;
com-invdir;
com-sequential;
prechargep = <0x22>;
};
};

View file

@ -0,0 +1,58 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/outputs.h>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
// Layers
#define DEFAULT 0 // default_layer
#define LOWER 1 // lower_layer
#define RAISE 2 // raise_layer
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
bindings = <
&kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp BSLH
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp GRAV
&kp CAPS &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RSHFT
&kp LALT &kp LCTRL &lt 1 RET &lt 2 MINUS &kp LGUI &kp LGUI &lt 2 EQUAL &lt 1 SPACE &kp BSPC &kp DEL
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
lower_layer {
bindings = <
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
raise_layer {
bindings = <
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
&trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
>;
sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN>;
};
};
};

View file

@ -0,0 +1,14 @@
file_format: "1"
id: leeloo
name: Leeloo
type: shield
url: https://clicketysplit.ca/pages/leeloo
requires: [pro_micro]
exposes: [i2c_oled]
features:
- keys
- display
- encoder
siblings:
- leeloo_left
- leeloo_right

View file

@ -0,0 +1,9 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
# Uncomment the following line to enable the OLED Display
# CONFIG_ZMK_DISPLAY=y
# Uncomment these two lines to add support for encoders
# CONFIG_EC11=y
# CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y

View file

@ -0,0 +1,21 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include "leeloo.dtsi"
&kscan0 {
col-gpios
= <&pro_micro 19 GPIO_ACTIVE_HIGH>
, <&pro_micro 18 GPIO_ACTIVE_HIGH>
, <&pro_micro 15 GPIO_ACTIVE_HIGH>
, <&pro_micro 14 GPIO_ACTIVE_HIGH>
, <&pro_micro 16 GPIO_ACTIVE_HIGH>
, <&pro_micro 10 GPIO_ACTIVE_HIGH>
;
};
&left_encoder {
status = "okay";
};

View file

@ -0,0 +1,9 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
# Uncomment the following line to enable the OLED Display
# CONFIG_ZMK_DISPLAY=y
# Uncomment these two lines to add support for encoders
# CONFIG_EC11=y
# CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y

View file

@ -0,0 +1,25 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include "leeloo.dtsi"
&default_transform {
col-offset = <6>;
};
&kscan0 {
col-gpios
= <&pro_micro 10 GPIO_ACTIVE_HIGH>
, <&pro_micro 16 GPIO_ACTIVE_HIGH>
, <&pro_micro 14 GPIO_ACTIVE_HIGH>
, <&pro_micro 15 GPIO_ACTIVE_HIGH>
, <&pro_micro 18 GPIO_ACTIVE_HIGH>
, <&pro_micro 19 GPIO_ACTIVE_HIGH>
;
};
&right_encoder {
status = "okay";
};