pwarren
/
zmk_mf68
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: formatted with prettier

This commit is contained in:
innovaker 2020-11-03 13:11:56 +00:00 committed by Pete Johanson
parent a29e041b1f
commit a1dd216519
3 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/docs/dev-guide-new-shield.md
View File

@ -28,11 +28,11 @@ ZMK support for split keyboards requires a few more files than single boards to
## New Shield Directory
:::note
This guide describes how to add shield to the ZMK main repository. If you are building firmware for your
This guide describes how to add shield to the ZMK main repository. If you are building firmware for your
own prototype or handwired keyboard, it is recommended to use your own user config repository. Follow the
[user setup guide](./user-setup.md) to create your user config repository first. When following the rest
of this guide, replace the `app/` directory in the ZMK main repository with the `config/` directory in your
user config repository. For example, `app/boards/shields/<keyboard_name>` should now be
user config repository. For example, `app/boards/shields/<keyboard_name>` should now be
`config/boards/shields/<keyboard_name>`.
:::
@ -75,7 +75,7 @@ that make sense to have different defaults when this shield is used. One main it
that usually has a new default value set here is the `ZMK_KEYBOARD_NAME` value,
which controls the display name of the device over USB and BLE.
The updated new default values should always be wrapped inside a conditional on the shield config name defined in the `Kconfig.shield` file. Here's the simplest example file.
The updated new default values should always be wrapped inside a conditional on the shield config name defined in the `Kconfig.shield` file. Here's the simplest example file.
:::warning
Do not make the keyboard name too long, otherwise the bluetooth advertising might fail and you will not be able to find your keyboard from your laptop / tablet.

6
docs/docs/dev-guide-usb-logging.md
View File

@ -27,7 +27,7 @@ The following KConfig values need to be set, either by copy and pasting into the
:::note
If you are debugging your own keyboard in your [user config repository](./user-setup.md), use
`config/boards/shields/<your_keyboard>/<your_keyboard>.conf` instead of `app/prj.conf`. In Github
Actions, you can search the `Kconfig file` build log to verify the options above have been enabled
Actions, you can search the `Kconfig file` build log to verify the options above have been enabled
for you successfully.
:::
@ -90,14 +90,14 @@ If you already have the Ardunio IDE installed you can also use its built-in Seri
</TabItem>
<TabItem value="macos">
On MacOS, the device name is something like `/dev/tty.usbmodemXXXXX` where `XXXXX` is some numerical ID.
On MacOS, the device name is something like `/dev/tty.usbmodemXXXXX` where `XXXXX` is some numerical ID.
You can connect to the device with [tio](https://tio.github.io/) (can be installed via [Homebrew](https://formulae.brew.sh/formula/tio)):
```
sudo tio /dev/tty.usbmodem14401
```
You should see tio printing `Disconnected` or `Connected` when you disconnect or reconnect the USB cable.
You should see tio printing `Disconnected` or `Connected` when you disconnect or reconnect the USB cable.
</TabItem>
</Tabs>

2
docs/docs/user-setup.md
View File

@ -105,7 +105,7 @@ Pick an MCU board:
:::note
If you are building firmware for a new keyboard shield that is not included in the built-in
list of shields, you can choose any shield from the list that is similar to yours to generate the repository,
list of shields, you can choose any shield from the list that is similar to yours to generate the repository,
and edit / add necessary files according to the [guide for adding new keyboard shield](./dev-guide-new-shield.md).
:::