Merge branch 'main' into CrossR/Sofle

.github/workflows/build.yml

@@ -8,7 +8,7 @@ jobs:
     name: Build Test
     strategy:
       matrix:
-        board: [proton_c, nice_nano, bluemicro52840_v1]
+        board: [proton_c, nice_nano, bluemicro840_v1, nrfmicro_13]
         shield:
           - corne_left
           - corne_right
@@ -25,6 +25,8 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v2
       - name: Cache west modules
+        timeout-minutes: 2
+        continue-on-error: true
         uses: actions/cache@v2
         env:
           cache-name: cache-zephyr-modules

app/CMakeLists.txt

@@ -1,4 +1,3 @@
-# Find Zephyr. This also loads Zephyr's build system.
 cmake_minimum_required(VERSION 3.13.1)
 
 set(CONFIG_APPLICATION_DEFINED_SYSCALL true)
@@ -15,6 +14,7 @@ list(APPEND SYSCALL_INCLUDE_DIRS ${CMAKE_CURRENT_SOURCE_DIR}/drivers/zephyr)
 
 include(cmake/zmk_config.cmake)
 
+# Find Zephyr. This also loads Zephyr's build system.
 find_package(Zephyr REQUIRED HINTS ../zephyr)
 project(zmk)
 
@@ -44,7 +44,7 @@ target_sources(app PRIVATE src/behaviors/behavior_none.c)
 target_sources(app PRIVATE src/behaviors/behavior_sensor_rotate_key_press.c)
 target_sources_ifdef(CONFIG_ZMK_RGB_UNDERGLOW app PRIVATE src/behaviors/behavior_rgb_underglow.c)
 target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/ble.c)
-target_sources_ifdef(CONFIG_ZMK_BLE_UNPAIR_COMBO app PRIVATE src/ble_unpair_combo.c)
+target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/ble_unpair_combo.c)
 target_sources_ifdef(CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL app PRIVATE src/split_listener.c)
 target_sources_ifdef(CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL app PRIVATE src/split/bluetooth/service.c)
 target_sources_ifdef(CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL app PRIVATE src/split/bluetooth/central.c)

app/Kconfig

@@ -41,16 +41,10 @@ menuconfig ZMK_BLE
 	select BT_GATT_DIS
 	select BT_GATT_BAS
 	select SETTINGS
-	select BT_SETTINGS
+	# select BT_SETTINGS
 
 if ZMK_BLE
 
-config ZMK_BLE_UNPAIR_COMBO
-	bool "Enable BT unpair combo"
-	help
-		Adds a magic key combo that can be held on startup to remove all paired devices
-	default n
-
 config ZMK_BLE_INIT_PRIORITY
 	int "Init Priority"
 	default 50
@@ -199,6 +193,10 @@ source "subsys/logging/Kconfig.template.log_config"
 
 rsource "boards/Kconfig"
 rsource "boards/shields/*/Kconfig.defconfig"
+rsource "boards/shields/*/Kconfig.shield"
+
+osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.defconfig"
+osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.shield"
 
 source "Kconfig.zephyr"
 

app/boards/arm/bluemicro840/Kconfig

@@ -4,5 +4,5 @@ config BOARD_ENABLE_DCDC
 	bool "Enable DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_BLUEMICRO52840_V1
+	depends on BOARD_BLUEMICRO840_V1
 

app/boards/arm/bluemicro840/Kconfig.board

@@ -1,8 +1,8 @@
-# BlueMicro52840_V1 board configuration
+# BlueMicro840 board configuration
 
 # Copyright (c) 2020 Pete Johanson, Derek Schmell
 # SPDX-License-Identifier: MIT
 
-config BOARD_BLUEMICRO52840_V1
+config BOARD_BLUEMICRO840_V1
-	bool "BlueMicro52840_V1"
+	bool "BlueMicro840_V1"
 	depends on SOC_NRF52840_QIAA

app/boards/arm/bluemicro840/Kconfig.defconfig

@@ -1,12 +1,12 @@
-# BlueMicro52840 board configuration
+# BlueMicro840 board configuration
 
 # Copyright (c) 2020 Pete Johanson, Derek Schmell
 # SPDX-License-Identifier: MIT
 
-if BOARD_BLUEMICRO52840_V1
+if BOARD_BLUEMICRO840_V1
 
 config BOARD
-	default "bluemicro52840_v1"
+	default "bluemicro840_v1"
 
 if USB
 
@@ -27,4 +27,4 @@ config ZMK_BLE
 config ZMK_USB
 	default y
 
-endif # BOARD_BLUEMICRO52840_V1
+endif # BOARD_BLUEMICRO840_V1

app/boards/arm/bluemicro840/bluemicro840_v1.dts

@@ -9,8 +9,8 @@
 #include "arduino_pro_micro_pins.dtsi"
 
 / {
-	model = "BlueMicro52840_V1";
+	model = "BlueMicro840_V1";
-	compatible = "bluemicro52840,v1";
+	compatible = "bluemicro840,v1";
 
 	chosen {
 		zephyr,code-partition = &code_partition;

app/boards/arm/bluemicro840/bluemicro840_v1.yaml

@@ -1,5 +1,5 @@
-identifier: bluemicro52840_v1
+identifier: bluemicro840_v1
-name: BlueMicro52840_V1
+name: BlueMicro840_V1
 type: mcu
 arch: arm
 toolchain:

app/boards/arm/bluemicro840/bluemicro840_v1_defconfig

@@ -2,7 +2,7 @@
 
 CONFIG_SOC_SERIES_NRF52X=y
 CONFIG_SOC_NRF52840_QIAA=y
-CONFIG_BOARD_BLUEMICRO52840_V1=y
+CONFIG_BOARD_BLUEMICRO840_V1=y
 
 # Enable MPU
 CONFIG_ARM_MPU=y

app/boards/arm/nrfmicro/CMakeLists.txt

@@ -0,0 +1,14 @@
+set_property(GLOBAL APPEND PROPERTY extra_post_build_commands
+  COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py
+  -c 
+  -b 0x26000
+  -f 0xADA52840
+  -o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2
+  ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin
+)
+
+if(CONFIG_PINMUX)
+zephyr_library()
+zephyr_library_sources(pinmux.c)
+zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)
+endif()

app/boards/arm/nrfmicro/Kconfig

@@ -0,0 +1,5 @@
+config BOARD_ENABLE_DCDC
+	bool "Enable DCDC mode"
+	select SOC_DCDC_NRF52X
+	default y
+	depends on (BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13)

app/boards/arm/nrfmicro/Kconfig.board

@@ -0,0 +1,16 @@
+# nrfmicro board configuration
+
+# Copyright (c) 2020 Okke Formsma, joric
+# SPDX-License-Identifier: MIT
+
+config BOARD_NRFMICRO_11
+	bool "nrfmicro_11"
+	depends on SOC_NRF52840_QIAA
+
+config BOARD_NRFMICRO_11_FLIPPED
+	bool "nrfmicro_11_flipped"
+	depends on SOC_NRF52840_QIAA
+
+config BOARD_NRFMICRO_13
+	bool "nrfmicro_13"
+	depends on SOC_NRF52840_QIAA

app/boards/arm/nrfmicro/Kconfig.defconfig

@@ -0,0 +1,33 @@
+# Electronut Labs Papyr board configuration
+
+# Copyright (c) 2020 Okke Formsma, joric
+# SPDX-License-Identifier: MIT
+
+if BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13
+
+config BOARD
+	default "nrfmicro"
+
+if USB
+
+config USB_NRFX
+	default y
+
+config USB_DEVICE_STACK
+	default y
+
+endif # USB
+
+config BT_CTLR
+	default BT
+
+config ZMK_BLE
+	default y
+
+config ZMK_USB
+	default y
+
+config PINMUX
+	default y
+	
+endif # BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13

app/boards/arm/nrfmicro/arduino_pro_micro_pins.dtsi

@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+
+/ {
+	pro_micro_d: connector_d {
+		compatible = "arduino-pro-micro";
+		#gpio-cells = <2>;
+		gpio-map-mask = <0xffffffff 0xffffffc0>;
+		gpio-map-pass-thru = <0 0x3f>;
+		gpio-map
+			= <0 0 &gpio0 8 0>		/* D0 */
+			, <1 0 &gpio0 6 0>		/* D1 */
+			, <2 0 &gpio0 15 0>		/* D2 */
+			, <3 0 &gpio0 17 0>		/* D3 */
+			, <4 0 &gpio0 20 0>		/* D4/A6 */
+			, <5 0 &gpio0 13 0>		/* D5 */
+			, <6 0 &gpio0 24 0>		/* D6/A7 */
+			, <7 0 &gpio0 9 0>		/* D7 */
+			, <8 0 &gpio0 10 0>		/* D8/A8 */
+			, <9 0 &gpio1 6 0>		/* D9/A9 */
+			, <10 0 &gpio1 11 0>	/* D10/A10 */
+			, <16 0 &gpio0 28 0>	/* D16 */
+			, <14 0 &gpio0 3 0>	    /* D14 */
+			, <15 0 &gpio1 13 0>	/* D15 */
+			;
+	};
+
+	pro_micro_a: connector_a {
+		compatible = "arduino-pro-micro";
+		#gpio-cells = <2>;
+		gpio-map-mask = <0xffffffff 0xffffffc0>;
+		gpio-map-pass-thru = <0 0x3f>;
+		gpio-map
+			= <0 0 &gpio0 2 0>	/* A0 */
+			, <1 0 &gpio0 29 0>	/* A1 */
+			, <2 0 &gpio0 31 0>	/* A2 */
+			, <3 0 &gpio0 30 0>	/* A3 */
+			, <6 0 &gpio0 20 0>	/* D4/A6 */
+			, <7 0 &gpio0 24 0>	/* D6/A7 */
+			, <8 0 &gpio0 10 0>	/* D8/A8 */
+			, <9 0 &gpio1 6 0>	/* D9/A9 */
+			, <10 0 &gpio1 11 0>	/* D10/A10 */
+			;
+	};
+};
+
+
+pro_micro_i2c: &i2c0 {};
+pro_micro_spi: &spi0 {};
+pro_micro_serial: &uart0 {};

app/boards/arm/nrfmicro/arduino_pro_micro_pins_flipped.dtsi

@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+/ {
+	pro_micro_d: connector_d {
+		compatible = "arduino-pro-micro";
+		#gpio-cells = <2>;
+		gpio-map-mask = <0xffffffff 0xffffffc0>;
+		gpio-map-pass-thru = <0 0x3f>;
+		gpio-map
+			= <0 0 &gpio0 8 0>		/* D0 */
+			, <1 0 &gpio0 6 0>		/* D1 */
+			, <2 0 &gpio0 30 0>		/* D2 */
+			, <3 0 &gpio0 31 0>		/* D3 */
+			, <4 0 &gpio0 29 0>		/* D4/A6 */
+			, <5 0 &gpio0 2 0>		/* D5 */
+			, <6 0 &gpio1 13 0>		/* D6/A7 */
+			, <7 0 &gpio0 3 0>		/* D7 */
+			, <8 0 &gpio0 28 0>		/* D8/A8 */
+			, <9 0 &gpio1 11 0>		/* D9/A9 */
+			, <10 0 &gpio1 6 0>	    /* D10/A10 */
+			, <16 0 &gpio0 10 0>	/* D16 */
+			, <14 0 &gpio0 9 0>	    /* D14 */
+			, <15 0 &gpio0 24 0>	/* D15 */
+			;
+	};
+
+	pro_micro_a: connector_a {
+		compatible = "arduino-pro-micro";
+		#gpio-cells = <2>;
+		gpio-map-mask = <0xffffffff 0xffffffc0>;
+		gpio-map-pass-thru = <0 0x3f>;
+		gpio-map
+			= <0 0 &gpio0 13 0>	/* A0 */
+			, <1 0 &gpio0 20 0>	/* A1 */
+			, <2 0 &gpio0 17 0>	/* A2 */
+			, <3 0 &gpio0 15 0>	/* A3 */
+			, <6 0 &gpio0 29 0>	/* D4/A6 */
+			, <7 0 &gpio1 13 0>	/* D6/A7 */
+			, <8 0 &gpio0 28 0>	/* D8/A8 */
+			, <9 0 &gpio1 11 0>	/* D9/A9 */
+			, <10 0 &gpio1 6 0>	/* D10/A10 */
+			;
+	};
+};
+
+pro_micro_i2c: &i2c0 {};
+pro_micro_spi: &spi0 {};
+pro_micro_serial: &uart0 {};

app/boards/arm/nrfmicro/board.cmake

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: MIT
+
+board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
+include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/nrfmicro/nrfmicro_11.dts

@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+#include "arduino_pro_micro_pins.dtsi"
+
+/ {
+	model = "nrfmicro";
+	compatible = "joric,nrfmicro";
+
+	chosen {
+		zephyr,code-partition = &code_partition;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue_led: led_0 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			label = "Blue LED";
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "nordic,nrf-twi";
+	sda-pin = <15>;
+	scl-pin = <17>;
+};
+
+&uart0 {
+	compatible = "nordic,nrf-uarte";
+	status = "okay";
+	current-speed = <115200>;
+	tx-pin = <39>;
+	rx-pin = <34>;
+	rts-pin = <33>;
+	cts-pin = <12>;
+};
+
+&usbd {
+	status = "okay";
+};
+
+
+&flash0 {
+	/*
+	 * For more information, see:
+	 * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+	 */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "adafruit_boot";
+			reg = <0x000000000 0x0000C000>;
+		};
+		code_partition: partition@26000 {
+			label = "code_partition";
+			reg = <0x00026000 0x000d2000>;
+		};
+
+		/*
+		 * The flash starting at 0x000f8000 and ending at
+		 * 0x000fffff is reserved for use by the application.
+		 */
+
+		/*
+		 * Storage partition will be used by FCB/LittleFS/NVS
+		 * if enabled.
+		 */
+		storage_partition: partition@f8000 {
+			label = "storage";
+			reg = <0x000f8000 0x00008000>;
+		};
+	};
+};

app/boards/arm/nrfmicro/nrfmicro_11.yaml

@@ -0,0 +1,15 @@
+identifier: nrfmicro_11
+name: nrfmicro_11
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - adc
+  - usb_device
+  - ble
+  - ieee802154
+  - pwm
+  - watchdog

app/boards/arm/nrfmicro/nrfmicro_11_defconfig

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: MIT
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_NRFMICRO_11=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+CONFIG_USE_DT_CODE_PARTITION=y
+
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+CONFIG_CLOCK_CONTROL_NRF=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y

app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts

@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+#include "arduino_pro_micro_pins_flipped.dtsi"
+
+/ {
+	model = "nrfmicro";
+	compatible = "joric,nrfmicro";
+
+	chosen {
+		zephyr,code-partition = &code_partition;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue_led: led_0 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			label = "Blue LED";
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "nordic,nrf-twi";
+	sda-pin = <30>;
+	scl-pin = <31>;
+};
+
+&uart0 {
+	compatible = "nordic,nrf-uarte";
+	status = "okay";
+	current-speed = <115200>;
+	tx-pin = <39>;
+	rx-pin = <34>;
+	rts-pin = <33>;
+	cts-pin = <12>;
+};
+
+&usbd {
+	status = "okay";
+};
+
+
+&flash0 {
+	/*
+	 * For more information, see:
+	 * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+	 */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "adafruit_boot";
+			reg = <0x000000000 0x0000C000>;
+		};
+		code_partition: partition@26000 {
+			label = "code_partition";
+			reg = <0x00026000 0x000d2000>;
+		};
+
+		/*
+		 * The flash starting at 0x000f8000 and ending at
+		 * 0x000fffff is reserved for use by the application.
+		 */
+
+		/*
+		 * Storage partition will be used by FCB/LittleFS/NVS
+		 * if enabled.
+		 */
+		storage_partition: partition@f8000 {
+			label = "storage";
+			reg = <0x000f8000 0x00008000>;
+		};
+	};
+};

app/boards/arm/nrfmicro/nrfmicro_11_flipped.yaml

@@ -0,0 +1,15 @@
+identifier: nrfmicro_11_flipped
+name: nrfmicro_11_flipped
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - adc
+  - usb_device
+  - ble
+  - ieee802154
+  - pwm
+  - watchdog

app/boards/arm/nrfmicro/nrfmicro_11_flipped_defconfig

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: MIT
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_NRFMICRO_11_FLIPPED=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+CONFIG_USE_DT_CODE_PARTITION=y
+
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+CONFIG_CLOCK_CONTROL_NRF=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y

app/boards/arm/nrfmicro/nrfmicro_13.dts

@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+#include "arduino_pro_micro_pins.dtsi"
+
+/ {
+	model = "nrfmicro";
+	compatible = "joric,nrfmicro";
+
+	chosen {
+		zephyr,code-partition = &code_partition;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue_led: led_0 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			label = "Blue LED";
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "nordic,nrf-twi";
+	sda-pin = <15>;
+	scl-pin = <17>;
+};
+
+&uart0 {
+	compatible = "nordic,nrf-uarte";
+	status = "okay";
+	current-speed = <115200>;
+	tx-pin = <39>;
+	rx-pin = <34>;
+	rts-pin = <33>;
+	cts-pin = <12>;
+};
+
+&usbd {
+	status = "okay";
+};
+
+
+&flash0 {
+	/*
+	 * For more information, see:
+	 * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+	 */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "adafruit_boot";
+			reg = <0x000000000 0x0000C000>;
+		};
+		code_partition: partition@26000 {
+			label = "code_partition";
+			reg = <0x00026000 0x000d2000>;
+		};
+
+		/*
+		 * The flash starting at 0x000f8000 and ending at
+		 * 0x000fffff is reserved for use by the application.
+		 */
+
+		/*
+		 * Storage partition will be used by FCB/LittleFS/NVS
+		 * if enabled.
+		 */
+		storage_partition: partition@f8000 {
+			label = "storage";
+			reg = <0x000f8000 0x00008000>;
+		};
+	};
+};

app/boards/arm/nrfmicro/nrfmicro_13.yaml

@@ -0,0 +1,15 @@
+identifier: nrfmicro_13
+name: nrfmicro_13
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - adc
+  - usb_device
+  - ble
+  - ieee802154
+  - pwm
+  - watchdog

app/boards/arm/nrfmicro/nrfmicro_13_defconfig

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: MIT
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_NRFMICRO_13=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+CONFIG_USE_DT_CODE_PARTITION=y
+
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+CONFIG_CLOCK_CONTROL_NRF=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y

app/boards/arm/nrfmicro/pinmux.c

@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2020 Okke Formsma, joric
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <kernel.h>
+#include <device.h>
+#include <init.h>
+#include <drivers/gpio.h>
+#include <sys/sys_io.h>
+#include <devicetree.h>
+
+static int pinmux_nrfmicro_init(struct device *port)
+{
+	ARG_UNUSED(port);
+
+	struct device *p1 = device_get_binding("GPIO_1");
+
+#if CONFIG_BOARD_NRFMICRO_13
+	struct device *p0 = device_get_binding("GPIO_0");
+	// enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1)
+	gpio_pin_configure(p1, 9, GPIO_OUTPUT);
+	gpio_pin_set(p1, 9, 0);
+
+	// enable charger (nRFMicro 1.3 only)
+	gpio_pin_configure(p0, 5, GPIO_OUTPUT);
+	gpio_pin_set(p0, 5, 0);
+#else
+    // enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1)
+	gpio_pin_configure(p1, 9, GPIO_OUTPUT);
+	gpio_pin_set(p1, 9, 1);
+#endif
+	return 0;
+}
+
+SYS_INIT(pinmux_nrfmicro_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);

app/boards/shields/corne/corne.keymap

@@ -21,12 +21,12 @@
                 lower_layer {
 // -----------------------------------------------------------------------------------------
 // |  ESC |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  | BKSP |
-// | CTRL |     |     |     |     |     |   | RGT |  UP | DWN | LFT |     |      |
+// | CTRL |     |     |     |     |     |   | LFT | DWN |  UP | RGT |     |      |
 // | SHFT |     |     |     |     |     |   |     |     |     |     |     |      |
 //                    | GUI |     | SPC |   | ENT |     | ALT |
                         bindings = <
    &kp ESC  &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5   &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp BKSP
-   &kp LCTL &trans    &trans    &trans    &trans    &trans      &kp RARW  &kp UARW  &kp DARW  &kp LARW  &trans    &trans
+   &kp LCTL &trans    &trans    &trans    &trans    &trans      &kp LARW  &kp DARW  &kp UARW  &kp RARW  &trans    &trans
    &kp LSFT &trans    &trans    &trans    &trans    &trans      &trans    &trans    &trans    &trans    &trans    &trans
                                       &kp LGUI &trans &kp SPC   &kp RET &trans &kp RALT
                         >;
@@ -40,8 +40,8 @@
 //                    | GUI |     | SPC |   | ENT |     | ALT |
                         bindings = <
    &kp  ESC &kp BANG  &kp ATSN  &kp HASH  &kp CURU  &kp PRCT    &kp CRRT  &kp AMPS &kp KMLT &kp LPRN &kp RPRN &kp BKSP
-   &kp LCTL &trans    &trans    &trans    &trans    &trans      &kp MINUS &kp EQL  &kp LBKT &kp RBKT &kp PIPE &trans
+   &kp LCTL &trans    &trans    &trans    &trans    &trans      &kp MINUS &kp EQL  &kp LBKT &kp RBKT &kp PIPE &kp GRAV
-   &kp LSFT &trans    &trans    &trans    &trans    &trans      &trans    &trans   &trans   &trans   &trans   &trans
+   &kp LSFT &trans    &trans    &trans    &trans    &trans      &trans    &trans   &trans   &trans   &kp BSLH &kp TILD
                                       &kp LGUI &trans &kp SPC   &kp RET &trans &kp RALT
                         >;
                 };

app/boards/shields/corne/corne_left.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
 CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/boards/shields/corne/corne_right.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
 CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/boards/shields/kyria/boards/nrfmicro_11.overlay

@@ -0,0 +1,29 @@
+&spi1 {
+	compatible = "nordic,nrf-spi";
+	status = "okay";
+	mosi-pin = <6>;
+	// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
+	sck-pin = <12>;  // 0.12 is not broken out on the nRFMicro
+	miso-pin = <22>; // 0.22 is not broken out on the nRFMicro
+
+	led_strip: ws2812@0 {
+		compatible = "worldsemi,ws2812-spi";
+		label = "WS2812";
+
+		/* SPI */
+		reg = <0>; /* ignored, but necessary for SPI bindings */
+		spi-max-frequency = <4000000>;
+
+		/* WS2812 */
+		chain-length = <10>; /* arbitrary; change at will */
+		spi-one-frame = <0x70>;
+		spi-zero-frame = <0x40>;
+	};
+};
+
+/ {
+	chosen {
+		zmk,underglow = &led_strip;
+	};
+};
+

app/boards/shields/kyria/boards/nrfmicro_11_flipped.overlay

@@ -0,0 +1,28 @@
+&spi1 {
+	compatible = "nordic,nrf-spi";
+	status = "okay";
+	mosi-pin = <6>;
+	// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
+	sck-pin = <12>;  // 0.12 is not broken out on the nRFMicro
+	miso-pin = <22>; // 0.22 is not broken out on the nRFMicro
+
+	led_strip: ws2812@0 {
+		compatible = "worldsemi,ws2812-spi";
+		label = "WS2812";
+
+		/* SPI */
+		reg = <0>; /* ignored, but necessary for SPI bindings */
+		spi-max-frequency = <4000000>;
+
+		/* WS2812 */
+		chain-length = <10>; /* arbitrary; change at will */
+		spi-one-frame = <0x70>;
+		spi-zero-frame = <0x40>;
+	};
+};
+
+/ {
+	chosen {
+		zmk,underglow = &led_strip;
+	};
+};

app/boards/shields/kyria/boards/nrfmicro_13.overlay

@@ -0,0 +1,28 @@
+&spi1 {
+	compatible = "nordic,nrf-spi";
+	status = "okay";
+	mosi-pin = <6>;
+	// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
+	sck-pin = <12>;  // 0.12 is not broken out on the nRFMicro
+	miso-pin = <22>; // 0.22 is not broken out on the nRFMicro
+
+	led_strip: ws2812@0 {
+		compatible = "worldsemi,ws2812-spi";
+		label = "WS2812";
+
+		/* SPI */
+		reg = <0>; /* ignored, but necessary for SPI bindings */
+		spi-max-frequency = <4000000>;
+
+		/* WS2812 */
+		chain-length = <10>; /* arbitrary; change at will */
+		spi-one-frame = <0x70>;
+		spi-zero-frame = <0x40>;
+	};
+};
+
+/ {
+	chosen {
+		zmk,underglow = &led_strip;
+	};
+};

app/boards/shields/kyria/kyria_left.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
-CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
+CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/boards/shields/kyria/kyria_right.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
 CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/boards/shields/lily58/lily58_left.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
 CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/boards/shields/lily58/lily58_right.conf

@@ -1,3 +1,2 @@
 CONFIG_ZMK_SPLIT=y
 CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y
-CONFIG_ZMK_BLE_UNPAIR_COMBO=y

app/cmake/zmk_config.cmake

@@ -44,6 +44,7 @@ endif()
 set(CACHED_ZMK_CONFIG ${ZMK_CONFIG} CACHE STRING "Selected user ZMK config")
 
 if (ZMK_CONFIG)
+	set(ENV{ZMK_CONFIG} "${ZMK_CONFIG}")
 	if(EXISTS ${ZMK_CONFIG}/boards)
 		message(STATUS "Adding ZMK config directory as board root: ${ZMK_CONFIG}")
 		list(APPEND BOARD_ROOT ${ZMK_CONFIG})

app/dts/behaviors/reset.dtsi

@@ -1,3 +1,5 @@
+#include <dt-bindings/zmk/reset.h>
+
 / {
 	behaviors {
 		reset: behavior_reset {
@@ -5,5 +7,12 @@
 			label = "RESET";
 			#binding-cells = <0>;
 		};
+
+		bootloader: behavior_reset_dfu {
+			compatible = "zmk,behavior-reset";
+			label = "BOOTLOADER_RESET";
+			type = <RST_UF2>;
+			#binding-cells = <0>;
+		};
 	};
 };

app/dts/bindings/behaviors/zmk,behavior-reset.yaml

@@ -6,3 +6,8 @@ description: Keyboard Reset Behavior
 compatible: "zmk,behavior-reset"
 
 include: zero_param.yaml
+
+properties:
+  type:
+    type: int
+    default: 0

app/include/dt-bindings/zmk/reset.h

@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2020 Peter Johanson <peter@peterjohanson.com>
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#define RST_WARM        0x00
+#define RST_COLD        0x01
+
+// AdaFruit nrf52 Bootloader Specific. See https://github.com/adafruit/Adafruit_nRF52_Bootloader/blob/d6b28e66053eea467166f44875e3c7ec741cb471/src/main.c#L107
+
+#define RST_UF2     0x57

app/src/behaviors/behavior_reset.c

@@ -13,8 +13,9 @@
 
 LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
 
-struct behavior_reset_config { };
+struct behavior_reset_config {
-struct behavior_reset_data { };
+  int type;
+};
 
 static int behavior_reset_init(struct device *dev)
 {
@@ -23,9 +24,11 @@ static int behavior_reset_init(struct device *dev)
 
 static int on_keymap_binding_pressed(struct device *dev, u32_t position, u32_t _param1, u32_t _param2)
 {
+  const struct behavior_reset_config *cfg = dev->config_info;
+
   // TODO: Correct magic code for going into DFU?
   // See https://github.com/adafruit/Adafruit_nRF52_Bootloader/blob/d6b28e66053eea467166f44875e3c7ec741cb471/src/main.c#L107
-  sys_reboot(0);
+  sys_reboot(cfg->type);
   return 0;
 }
 
@@ -34,12 +37,14 @@ static const struct behavior_driver_api behavior_reset_driver_api = {
 };
 
 
-static const struct behavior_reset_config behavior_reset_config = {};
+#define RST_INST(n) \
-
+  static const struct behavior_reset_config behavior_reset_config_##n = { \
-static struct behavior_reset_data behavior_reset_data;
+    .type = DT_INST_PROP(n, type) \
-
+  }; \
-DEVICE_AND_API_INIT(behavior_reset, DT_INST_LABEL(0), behavior_reset_init,
+  DEVICE_AND_API_INIT(behavior_reset_##n, DT_INST_LABEL(n), behavior_reset_init, \
-                    &behavior_reset_data,
+                    NULL, \
-                    &behavior_reset_config,
+                    &behavior_reset_config_##n, \
-                    APPLICATION, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
+                    APPLICATION, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, \
-                    &behavior_reset_driver_api);
+                    &behavior_reset_driver_api);
+  
+DT_INST_FOREACH_STATUS_OKAY(RST_INST)

app/src/ble_unpair_combo.c

@@ -7,10 +7,11 @@
 #include <device.h>
 #include <init.h>
 
-#include <logging/log.h>
-
 #define DT_DRV_COMPAT zmk_bt_unpair_combo
 
+#if DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT)
+
+#include <logging/log.h>
 LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
 
 #include <zmk/ble.h>
@@ -78,3 +79,5 @@ ZMK_SUBSCRIPTION(zmk_ble_unpair_combo, position_state_changed);
 SYS_INIT(zmk_ble_unpair_combo_init,
         APPLICATION,
         CONFIG_APPLICATION_INIT_PRIORITY);
+
+#endif /* DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT) */

docs/docs/behavior/key-press.md

@@ -1,5 +1,6 @@
 ---
-title: Key Presses
+title: Key Press Behaviors
+sidebar_label: Key Press
 ---
 
 ## Summary

docs/docs/behavior/layers.md

@@ -1,5 +1,6 @@
 ---
-title: Layers
+title: Layer Behaviors
+sidebar_label: Layers
 ---
 
 ## Summary
@@ -56,12 +57,13 @@ Example:
 ```
 
 "Toggle layer" for a :
+
 ```
 #define DEFAULT 0
 #define NAVI    1
 
 #define NONE 0
- 
+
 / {
 	keymap {
 		compatible = "zmk,keymap";
@@ -89,4 +91,4 @@ Example:
 };
 ```
 
-It is possible to use "toggle layer" to have keys that raise and lower the layers as well.
+It is possible to use "toggle layer" to have keys that raise and lower the layers as well.

docs/docs/behavior/lighting.md

@@ -1,15 +1,16 @@
 ---
-title: Lighting
+title: Lighting Behavior
+sidebar_label: Lighting
 ---
 
 ## Summary
 
-Lighting is often used for either aesthetics or for the practical purposes of lighting up keys in the dark. 
+Lighting is often used for either aesthetics or for the practical purposes of lighting up keys in the dark.
 Currently ZMK supports RGB underglow, which can be changed and configured using its behavior.
 
 ## RGB Action Defines
 
-RGB actions defines are provided through the [`dt-bindings/zmk/rgb.h`](https://github.com/zmkfirmware/zmk/blob/main/app/include/dt-bindings/zmk/rgb.h) header, 
+RGB actions defines are provided through the [`dt-bindings/zmk/rgb.h`](https://github.com/zmkfirmware/zmk/blob/main/app/include/dt-bindings/zmk/rgb.h) header,
 which is added at the top of the keymap file:
 
 ```
@@ -21,7 +22,7 @@ This will allow you to reference the actions defined in this header such as `RGB
 Here is a table describing the action for each define:
 
 | Define    | Action                                                    |
-|-----------|-----------------------------------------------------------|
+| --------- | --------------------------------------------------------- |
 | `RGB_TOG` | Toggles the RGB feature on and off                        |
 | `RGB_HUI` | Increases the hue of the RGB feature                      |
 | `RGB_HUD` | Decreases the hue of the RGB feature                      |
@@ -47,4 +48,4 @@ Example:
 
 ```
 &rgb_ug RGB_TOG
-```
+```

docs/docs/behavior/misc.md

@@ -1,5 +1,6 @@
 ---
-title: Miscellaneous
+title: Miscellaneous Behaviors
+sidebar_label: Miscellaneous
 ---
 
 ## Summary

docs/docs/behavior/mod-tap.md

@@ -1,5 +1,6 @@
 ---
-title: Mod-Tap
+title: Mod-Tap Behavior
+sidebar_label: Mod-Tap
 ---
 
 ## Summary

docs/docs/behavior/reset.md

@@ -0,0 +1,43 @@
+---
+title: Reset Behaviors
+sidebar_label: Reset
+---
+
+## Summary
+
+There are two available behaviors that can be used to trigger a reset of the keyboard.
+The first is a soft reset, that will simply reset and re-run the currently flashed
+firmware; the second when triggered will reset into the bootloader, allowing you to
+flash a new firmware to the keyboard.
+
+## Reset
+
+The basic reset behavior will reset the keyboard and re-run the firmware flashed
+to the device
+
+### Behavior Binding
+
+- Reference: `&reset`
+- Parameters: None
+
+Example:
+
+```
+&reset
+```
+
+## Bootloader Reset
+
+The bootloader reset behavior will reset the keyboard and put it into bootloader mode, allowing
+you to flash a new firmware.
+
+### Behavior Binding
+
+- Reference: `&bootloader`
+- Parameters: None
+
+Example:
+
+```
+&bootloader
+```

docs/docs/bond-reset.md

@@ -0,0 +1,27 @@
+---
+id: bond-reset
+title: Reset BLE Connections
+sidebar_label: BLE Reset
+---
+
+Known as a 'bond reset', a special key combination, that is not related to the user defined key map, which
+clears all wireless connection configurations. The keys must be held for 3 to 5 seconds after the device is
+reset.
+
+:::warning
+Currently, ZMK only supports a single BLE host. If you remove the keyboard from the host's bluetooth devices
+list, you will need to clear the bonds.
+:::
+
+### Split Keyboards
+
+Split keyboards will need to be cleared on both halves. For best results try to reset them at the same time.
+
+
+## Kyria
+
+![Kyria bond-reset combo](assets/bond-clearing/kyria.jpg)
+
+## Corne
+
+![Corne bond-reset combo](assets/bond-clearing/corne.jpg)

docs/docs/dev-setup.md

@@ -180,7 +180,7 @@ brew install cmake ninja python3 ccache dtc git wget
 
 ### West Build Command
 
-`west` is the [Zephyr™ meta-tool](https://docs.zephyrproject.org/latest/guides/west/index.html) used to configure and build Zephyr™ applications.
+`west` is the [Zephyr™ meta-tool](https://docs.zephyrproject.org/2.3.0/guides/west/index.html) used to configure and build Zephyr™ applications.
 
 West can be installed by using the `pip` python package manager.
 
@@ -223,7 +223,7 @@ The installation will prompt with several questions about installation location,
 <TabItem value="raspberryos">
 
 Because Raspberry OS (Raspbian) runs on the same architecture (but different ABI) as the keyboard MCUs,
-the operating system's installed [cross compilers](https://docs.zephyrproject.org/latest/getting_started/toolchain_other_x_compilers.html) can be used to target the different ABI.
+the operating system's installed [cross compilers](https://docs.zephyrproject.org/2.3.0/getting_started/toolchain_other_x_compilers.html) can be used to target the different ABI.
 
 First, the cross compiler should be installed:
 
@@ -259,23 +259,20 @@ The installation will prompt with several questions about installation location,
 
 #### GNU ARM Embedded
 
-Since the Zephyr™ SDK is not available for Windows, we recommending following the steps to install the [GNU ARM Embedded](https://docs.zephyrproject.org/latest/getting_started/toolchain_3rd_party_x_compilers.html#gnu-arm-embedded).
+Since the Zephyr™ SDK is not available for Windows, we recommending following the steps to install the [GNU ARM Embedded](https://docs.zephyrproject.org/2.3.0/getting_started/toolchain_3rd_party_x_compilers.html#gnu-arm-embedded).
 
 </TabItem>
 <TabItem value="mac">
 
-#### Zephyr™ ARM SDK
+#### GNU ARM Embedded
 
-To build firmwares for the ARM architecture (all supported MCUs/keyboards at this point), you'll need to install the Zephyr™ ARM SDK to your system:
+Since the Zephyr™ SDK is not available for macOS, we recommending following the steps to install the [GNU ARM Embedded](https://docs.zephyrproject.org/2.3.0/getting_started/toolchain_3rd_party_x_compilers.html#gnu-arm-embedded).
 
-```
+:::warning Security Controls Workaround
-export ZSDK_VERSION=0.11.2
-wget -q "https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v${ZSDK_VERSION}/zephyr-toolchain-arm-${ZSDK_VERSION}-setup.run" && \
- sh "zephyr-toolchain-arm-${ZSDK_VERSION}-setup.run" --quiet -- -d ~/.local/zephyr-sdk-${ZSDK_VERSION} && \
- rm "zephyr-toolchain-arm-\${ZSDK_VERSION}-setup.run"
-```
 
-The installation will prompt with several questions about installation location, and creating a default `~/.zephyrrc` for you with various variables. The defaults should normally work as expected.
+Please be sure to read the [additional setup instructions](https://docs.zephyrproject.org/2.3.0/getting_started/installation_mac.html#mac-gatekeeper) needed to address security controls found in macOS 10.15 Catalina and newer
+
+:::
 
 </TabItem>
 </OsTabs>
@@ -342,7 +339,7 @@ pip3 install --user -r zephyr/scripts/requirements-base.txt
 ### Environment Variables
 
 By default, the Zephyr™ SDK will create a file named `~/.zephyrrc` with the correct environment variables to build ZMK.
-We suggest two main [options](https://docs.zephyrproject.org/latest/guides/env_vars.html?highlight=zephyrrc) for how to load those settings.
+We suggest two main [options](https://docs.zephyrproject.org/2.3.0/guides/env_vars.html?highlight=zephyrrc) for how to load those settings.
 
 #### Per Shell
 
@@ -442,7 +439,7 @@ an onboard MCU, or one that uses a MCU board addon.
 
 ### Keyboard (Shield) + MCU Board
 
-ZMK treats keyboards that take a MCU addon board as [shields](https://docs.zephyrproject.org/latest/guides/porting/shields.html), and treats the smaller MCU board as the true [board](https://docs.zephyrproject.org/latest/guides/porting/board_porting.html)
+ZMK treats keyboards that take a MCU addon board as [shields](https://docs.zephyrproject.org/2.3.0/guides/porting/shields.html), and treats the smaller MCU board as the true [board](https://docs.zephyrproject.org/2.3.0/guides/porting/board_porting.html)
 
 Given the following:
 
@@ -458,7 +455,7 @@ west build -b proton_c -- -DSHIELD=kyria_left -DKEYMAP=default
 
 ### Keyboard With Onboard MCU
 
-Keyboards with onboard MCU chips are simply treated as the [board](https://docs.zephyrproject.org/latest/guides/porting/board_porting.html) as far as Zephyr™ is concerned.
+Keyboards with onboard MCU chips are simply treated as the [board](https://docs.zephyrproject.org/2.3.0/guides/porting/board_porting.html) as far as Zephyr™ is concerned.
 
 Given the following:
 

docs/docs/hardware.md

@@ -17,6 +17,8 @@ That being said, there are currently only a few specific [boards](/docs/faq#what
 ## Boards
 
 - [nice!nano](https://docs.nicekeyboards.com/#/nice!nano/) (`nice_nano`)
+- [nrfMicro](https://github.com/joric/nrfmicro) (`nrfmicro_13`, `nrfmicro_11`, `nrfmicro_11_flipped`)
+- [BlueMicro840](https://store.jpconstantineau.com/#/group/bluemicro) (`bluemicro840_v1`)
 - [QMK Proton-C](https://qmk.fm/proton-c/) (`proton_c`)
 
 ## Keyboard Shields

docs/sidebars.js

@@ -1,6 +1,6 @@
 module.exports = {
   someSidebar: {
-    "Getting Started": ["intro", "hardware", "faq", "user-setup"],
+    "Getting Started": ["intro", "hardware", "faq", "user-setup", "bond-reset"],
     Features: [
       "feature/keymaps",
       "feature/displays",
@@ -12,6 +12,7 @@ module.exports = {
       "behavior/layers",
       "behavior/misc",
       "behavior/mod-tap",
+      "behavior/reset",
       "behavior/lighting",
     ],
     Development: [

docs/static/setup.sh

@@ -11,7 +11,7 @@ title="ZMK Config Setup:"
 # TODO: Check for user.name and user.email git configs being set
 
 prompt="Pick an MCU board:"
-options=("nice!nano" "QMK Proton-C" "BlueMicro52840 (v1)")
+options=("nice!nano" "QMK Proton-C" "BlueMicro840 (v1)")
 
 echo "$title"
 echo ""
@@ -23,7 +23,7 @@ select opt in "${options[@]}" "Quit"; do
 
     1 ) board="nice_nano"; break;;
     2 ) board="proton_c"; break;;
-    3 ) board="bluemicro52840_v1"; break;;
+    3 ) board="bluemicro840_v1"; break;;
 
     $(( ${#options[@]}+1 )) ) echo "Goodbye!"; exit;;
     *) echo "Invalid option. Try another one.";continue;;