feat(endpoints): add preferred endpoint setting

Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.

Added a new behavior to control this setting. It supports commands:

    &end END_USB - Prefer USB output
    &end END_BLE - Prefer BLE output
    &end END_TOG - Toggle between USB and BLE

app/CMakeLists.txt

@@ -39,6 +39,7 @@ target_sources(app PRIVATE src/events/sensor_event.c)
 target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/events/ble_active_profile_changed.c)
 target_sources_ifdef(CONFIG_USB app PRIVATE src/events/usb_conn_state_changed.c)
 if (NOT CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL)
+  target_sources(app PRIVATE src/behaviors/behavior_endpoints.c)
   target_sources(app PRIVATE src/behaviors/behavior_key_press.c)
   target_sources(app PRIVATE src/behaviors/behavior_reset.c)
   target_sources(app PRIVATE src/behaviors/behavior_hold_tap.c)

app/dts/behaviors.dtsi

@@ -10,3 +10,4 @@
 #include <behaviors/rgb_underglow.dtsi>
 #include <behaviors/bluetooth.dtsi>
 #include <behaviors/ext_power.dtsi>
+#include <behaviors/endpoints.dtsi>

app/dts/behaviors/endpoints.dtsi

@@ -0,0 +1,9 @@
+/ {
+    behaviors {
+        end: behavior_endpoints {
+            compatible = "zmk,behavior-endpoints";
+            label = "ENDPOINTS";
+            #binding-cells = <1>;
+        };
+    };
+};

app/dts/bindings/behaviors/zmk,behavior-endpoints.yaml

@@ -0,0 +1,10 @@
+#
+# Copyright (c) 2020, The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+description: Endpoints Behavior
+
+compatible: "zmk,behavior-endpoints"
+
+include: one_param.yaml

app/include/dt-bindings/zmk/endpoints.h

@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#define ENDPOINT_TOGGLE_CMD 0
+#define ENDPOINT_USB_CMD 1
+#define ENDPOINT_BLE_CMD 2
+
+#define END_TOG ENDPOINT_TOGGLE_CMD
+#define END_USB ENDPOINT_USB_CMD
+#define END_BLE ENDPOINT_BLE_CMD

app/include/zmk/endpoints.h

@@ -9,4 +9,12 @@
 #include <zmk/keys.h>
 #include <zmk/hid.h>
 
+enum zmk_endpoint {
+    ZMK_ENDPOINT_USB,
+    ZMK_ENDPOINT_BLE,
+};
+
+int zmk_endpoints_select(enum zmk_endpoint endpoint);
+int zmk_endpoints_toggle();
+
 int zmk_endpoints_send_report(u8_t usage_report);

app/src/behaviors/behavior_endpoints.c

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#define DT_DRV_COMPAT zmk_behavior_endpoints
+
+#include <device.h>
+#include <devicetree.h>
+#include <drivers/behavior.h>
+
+#include <dt-bindings/zmk/endpoints.h>
+
+#include <zmk/behavior.h>
+#include <zmk/endpoints.h>
+
+#include <logging/log.h>
+LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
+
+static int on_keymap_binding_pressed(struct zmk_behavior_binding *binding,
+                                     struct zmk_behavior_binding_event event) {
+    switch (binding->param1) {
+    case ENDPOINT_TOGGLE_CMD:
+        return zmk_endpoints_toggle();
+    case ENDPOINT_USB_CMD:
+        return zmk_endpoints_select(ZMK_ENDPOINT_USB);
+    case ENDPOINT_BLE_CMD:
+        return zmk_endpoints_select(ZMK_ENDPOINT_BLE);
+    default:
+        LOG_ERR("Unknown endpoints command: %d", binding->param1);
+    }
+
+    return -ENOTSUP;
+}
+
+static int behavior_ep_init(struct device *dev) { return 0; }
+
+static const struct behavior_driver_api behavior_endpoints_driver_api = {
+    .binding_pressed = on_keymap_binding_pressed,
+};
+
+DEVICE_AND_API_INIT(behavior_end, DT_INST_LABEL(0), behavior_ep_init, NULL, NULL, APPLICATION,
+                    CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, &behavior_endpoints_driver_api);

app/src/endpoints.c

@@ -4,6 +4,9 @@
  * SPDX-License-Identifier: MIT
  */
 
+#include <init.h>
+#include <settings/settings.h>
+
 #include <zmk/ble.h>
 #include <zmk/endpoints.h>
 #include <zmk/hid.h>
@@ -16,21 +19,45 @@
 #include <logging/log.h>
 LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
 
-enum endpoint {
+#define DEFAULT_ENDPOINT                                                                           \
-    ENDPOINT_USB,
+    COND_CODE_1(IS_ENABLED(CONFIG_ZMK_BLE), (ZMK_ENDPOINT_BLE), (ZMK_ENDPOINT_USB))
-    ENDPOINT_BLE,
-};
 
-#define DEFAULT_ENDPOINT COND_CODE_1(IS_ENABLED(CONFIG_ZMK_BLE), (ENDPOINT_BLE), (ENDPOINT_USB))
+static enum zmk_endpoint current_endpoint = DEFAULT_ENDPOINT;
+static enum zmk_endpoint preferred_endpoint =
+    ZMK_ENDPOINT_USB; /* Used if multiple endpoints are ready */
 
-static enum endpoint current_endpoint = DEFAULT_ENDPOINT;
+static void update_current_endpoint();
+
+int zmk_endpoints_select(enum zmk_endpoint endpoint) {
+    LOG_DBG("Selected endpoint %d", endpoint);
+
+    if (preferred_endpoint == endpoint) {
+        return 0;
+    }
+
+    preferred_endpoint = endpoint;
+
+#if IS_ENABLED(CONFIG_SETTINGS)
+    settings_save_one("endpoints/preferred", &preferred_endpoint, sizeof(preferred_endpoint));
+#endif
+
+    update_current_endpoint();
+
+    return 0;
+}
+
+int zmk_endpoints_toggle() {
+    enum zmk_endpoint new_endpoint =
+        (preferred_endpoint == ZMK_ENDPOINT_USB) ? ZMK_ENDPOINT_BLE : ZMK_ENDPOINT_USB;
+    return zmk_endpoints_select(new_endpoint);
+}
 
 static int send_keypad_report() {
     struct zmk_hid_keypad_report *keypad_report = zmk_hid_get_keypad_report();
 
     switch (current_endpoint) {
 #if IS_ENABLED(CONFIG_ZMK_USB)
-    case ENDPOINT_USB: {
+    case ZMK_ENDPOINT_USB: {
         int err = zmk_usb_hid_send_report((u8_t *)keypad_report, sizeof(*keypad_report));
         if (err) {
             LOG_ERR("FAILED TO SEND OVER USB: %d", err);
@@ -40,7 +67,7 @@ static int send_keypad_report() {
 #endif /* IS_ENABLED(CONFIG_ZMK_USB) */
 
 #if IS_ENABLED(CONFIG_ZMK_BLE)
-    case ENDPOINT_BLE: {
+    case ZMK_ENDPOINT_BLE: {
         int err = zmk_hog_send_keypad_report(&keypad_report->body);
         if (err) {
             LOG_ERR("FAILED TO SEND OVER HOG: %d", err);
@@ -60,7 +87,7 @@ static int send_consumer_report() {
 
     switch (current_endpoint) {
 #if IS_ENABLED(CONFIG_ZMK_USB)
-    case ENDPOINT_USB: {
+    case ZMK_ENDPOINT_USB: {
         int err = zmk_usb_hid_send_report((u8_t *)consumer_report, sizeof(*consumer_report));
         if (err) {
             LOG_ERR("FAILED TO SEND OVER USB: %d", err);
@@ -70,7 +97,7 @@ static int send_consumer_report() {
 #endif /* IS_ENABLED(CONFIG_ZMK_USB) */
 
 #if IS_ENABLED(CONFIG_ZMK_BLE)
-    case ENDPOINT_BLE: {
+    case ZMK_ENDPOINT_BLE: {
         int err = zmk_hog_send_consumer_report(&consumer_report->body);
         if (err) {
             LOG_ERR("FAILED TO SEND OVER HOG: %d", err);
@@ -99,6 +126,49 @@ int zmk_endpoints_send_report(u8_t usage_page) {
     }
 }
 
+#if IS_ENABLED(CONFIG_SETTINGS)
+
+static int endpoints_handle_set(const char *name, size_t len, settings_read_cb read_cb,
+                                void *cb_arg) {
+    LOG_DBG("Setting endpoint value %s", log_strdup(name));
+
+    if (settings_name_steq(name, "preferred", NULL)) {
+        if (len != sizeof(enum zmk_endpoint)) {
+            LOG_ERR("Invalid endpoint size (got %d expected %d)", len, sizeof(enum zmk_endpoint));
+            return -EINVAL;
+        }
+
+        int err = read_cb(cb_arg, &preferred_endpoint, sizeof(enum zmk_endpoint));
+        if (err <= 0) {
+            LOG_ERR("Failed to read preferred endpoint from settings (err %d)", err);
+            return err;
+        }
+
+        update_current_endpoint();
+    }
+
+    return 0;
+}
+
+struct settings_handler endpoints_handler = {.name = "endpoints", .h_set = endpoints_handle_set};
+#endif /* IS_ENABLED(CONFIG_SETTINGS) */
+
+static int zmk_endpoints_init(struct device *_arg) {
+#if IS_ENABLED(CONFIG_SETTINGS)
+    settings_subsys_init();
+
+    int err = settings_register(&endpoints_handler);
+    if (err) {
+        LOG_ERR("Failed to register the endpoints settings handler (err %d)", err);
+        return err;
+    }
+
+    settings_load();
+#endif
+
+    return 0;
+}
+
 static bool is_usb_ready() {
 #if IS_ENABLED(CONFIG_ZMK_USB)
     return zmk_usb_is_hid_ready();
@@ -115,21 +185,20 @@ static bool is_ble_ready() {
 #endif
 }
 
-static enum endpoint get_selected_endpoint() {
+static enum zmk_endpoint get_selected_endpoint() {
     if (is_ble_ready()) {
         if (is_usb_ready()) {
-            LOG_DBG("Both endpoints are ready.");
+            LOG_DBG("Both endpoints are ready. Using %d", preferred_endpoint);
-            // TODO: add user setting to control this
+            return preferred_endpoint;
-            return ENDPOINT_USB;
         }
 
         LOG_DBG("Only BLE is ready.");
-        return ENDPOINT_BLE;
+        return ZMK_ENDPOINT_BLE;
     }
 
     if (is_usb_ready()) {
         LOG_DBG("Only USB is ready.");
-        return ENDPOINT_USB;
+        return ZMK_ENDPOINT_USB;
     }
 
     LOG_DBG("No endpoints are ready.");
@@ -144,8 +213,8 @@ static void disconnect_current_endpoint() {
     zmk_endpoints_send_report(USAGE_CONSUMER);
 }
 
-static int endpoint_listener(const struct zmk_event_header *eh) {
+static void update_current_endpoint() {
-    enum endpoint new_endpoint = get_selected_endpoint();
+    enum zmk_endpoint new_endpoint = get_selected_endpoint();
 
     if (new_endpoint != current_endpoint) {
         /* Cancel all current keypresses so keys don't stay held on the old endpoint. */
@@ -154,7 +223,10 @@ static int endpoint_listener(const struct zmk_event_header *eh) {
         current_endpoint = new_endpoint;
         LOG_INF("Endpoint changed: %d", current_endpoint);
     }
+}
 
+static int endpoint_listener(const struct zmk_event_header *eh) {
+    update_current_endpoint();
     return 0;
 }
 
@@ -165,3 +237,5 @@ ZMK_SUBSCRIPTION(endpoint_listener, usb_conn_state_changed);
 #if IS_ENABLED(CONFIG_ZMK_BLE)
 ZMK_SUBSCRIPTION(endpoint_listener, ble_active_profile_changed);
 #endif
+
+SYS_INIT(zmk_endpoints_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);

docs/docs/behavior/endpoints.md

@@ -0,0 +1,59 @@
+---
+title: Endpoint Behavior
+sidebar_label: Endpoints
+---
+
+## Summary
+
+The endpoint behavior allows selecting whether keyboard input is sent to the
+USB or bluetooth connection when both are connected. This allows connecting a
+keyboard to USB for power but sending input to a different device over bluetooth.
+
+By default, keyboard input is sent to USB when both endpoints are connected.
+Once you select a different endpoint, it will be remembered until you change it again.
+
+## Endpoints Command Defines
+
+Endpoints command defines are provided through the [`dt-bindings/zmk/endpoints.h`](https://github.com/zmkfirmware/zmk/blob/main/app/include/dt-bindings/zmk/endpoints.h)
+header, which is added at the top of the keymap file:
+
+```
+#include <dt-bindings/zmk/endpoints.h>
+```
+
+This allows you to reference the actions defined in this header:
+
+| Define                | Action                                               | Alias     |
+| --------------------- | ---------------------------------------------------- | --------- |
+| `ENDPOINT_USB_CMD`    | Send keyboard input to USB                           | `END_USB` |
+| `ENDPOINT_BLE_CMD`    | Send keyboard input to the current bluetooth profile | `END_BLE` |
+| `ENDPOINT_TOGGLE_CMD` | Toggle between USB and BLE                           | `END_TOG` |
+
+## Endpoints Behavior
+
+The endpoints behavior changes the preferred endpoint on press.
+
+### Behavior Binding
+
+- Reference: `&end`
+- Parameter #1: Command, e.g. `END_BLE`
+
+### Example:
+
+1. Behavior binding to prefer sending keyboard input to USB
+
+    ```
+    &end END_USB
+    ```
+
+1. Behavior binding to prefer sending keyboard input to the current bluetooth profile
+
+    ```
+    &end END_BLE
+    ```
+
+1. Behavior binding to toggle between preferring USB and BLE
+
+    ```
+    &end END_TOG
+    ```

docs/sidebars.js

@@ -22,6 +22,7 @@ module.exports = {
       "behavior/mod-tap",
       "behavior/reset",
       "behavior/bluetooth",
+      "behavior/endpoints",
       "behavior/lighting",
       "behavior/power",
     ],