diff --git a/app/boards/shields/murphpad/Kconfig.defconfig b/app/boards/shields/murphpad/Kconfig.defconfig new file mode 100644 index 00000000..6ec7e096 --- /dev/null +++ b/app/boards/shields/murphpad/Kconfig.defconfig @@ -0,0 +1,45 @@ +# Copyright (c) 2021 The ZMK Contributors +# SPDX-License-Identifier: MIT + +if SHIELD_MURPHPAD + +config ZMK_KEYBOARD_NAME + default "MurphPad" + +endif + +if ZMK_DISPLAY + +config I2C + default y + +config SSD1306 + default y + +config SSD1306_REVERSE_MODE + default y + +endif # ZMK_DISPLAY + +if LVGL + +config LVGL_HOR_RES_MAX + default 128 + +config LVGL_VER_RES_MAX + default 32 + +config LVGL_VDB_SIZE + default 64 + +config LVGL_DPI + default 148 + +config LVGL_BITS_PER_PIXEL + default 1 + +choice LVGL_COLOR_DEPTH + default LVGL_COLOR_DEPTH_1 +endchoice + +endif # LVGL diff --git a/app/boards/shields/murphpad/Kconfig.shield b/app/boards/shields/murphpad/Kconfig.shield new file mode 100644 index 00000000..389caa26 --- /dev/null +++ b/app/boards/shields/murphpad/Kconfig.shield @@ -0,0 +1,5 @@ +# Copyright (c) 2021 The ZMK Contributors +# SPDX-License-Identifier: MIT + +config SHIELD_MURPHPAD + def_bool $(shields_list_contains,murphpad) \ No newline at end of file diff --git a/app/boards/shields/murphpad/boards/nice_nano.conf b/app/boards/shields/murphpad/boards/nice_nano.conf new file mode 100644 index 00000000..dda71c13 --- /dev/null +++ b/app/boards/shields/murphpad/boards/nice_nano.conf @@ -0,0 +1,3 @@ +# Uncomment both to enable underglow +CONFIG_ZMK_RGB_UNDERGLOW=y +CONFIG_WS2812_STRIP=y diff --git a/app/boards/shields/murphpad/boards/nice_nano.overlay b/app/boards/shields/murphpad/boards/nice_nano.overlay new file mode 100644 index 00000000..b247334e --- /dev/null +++ b/app/boards/shields/murphpad/boards/nice_nano.overlay @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2021 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +&spi1 { + compatible = "nordic,nrf-spim"; + status = "okay"; + mosi-pin = <31>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <5>; + miso-pin = <7>; + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "WS2812"; + + /* SPI */ + reg = <0>; /* ignored, but necessary for SPI bindings */ + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <8>; /* number of LEDs */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; + +/ { + chosen { + zmk,underglow = &led_strip; + }; +}; \ No newline at end of file diff --git a/app/boards/shields/murphpad/murphpad.conf b/app/boards/shields/murphpad/murphpad.conf new file mode 100644 index 00000000..bdcd4255 --- /dev/null +++ b/app/boards/shields/murphpad/murphpad.conf @@ -0,0 +1,9 @@ +# Uncomment to turn on logging, and set ZMK logging to debug output +# CONFIG_ZMK_USB_LOGGING=y + +# Uncomment both to enable encoder +CONFIG_EC11=y +CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y + +# Uncomment to enable OLED +CONFIG_ZMK_DISPLAY=y \ No newline at end of file diff --git a/app/boards/shields/murphpad/murphpad.keymap b/app/boards/shields/murphpad/murphpad.keymap new file mode 100644 index 00000000..aec58878 --- /dev/null +++ b/app/boards/shields/murphpad/murphpad.keymap @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2021 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include +#include +#include +#include + + +#define TIMEOUT 300 + +&encoder_1 { + status = "okay"; +}; + +&encoder_2 { + status = "okay"; +}; + +/ { + combos { + compatible = "zmk,combos"; + combo_btclr { + timeout-ms = ; + key-positions = <1 6>; + bindings = <&bt BT_CLR>; + }; + combo_reset { + timeout-ms = ; + key-positions = <1 3>; + bindings = <&reset>; + }; + combo_bootloader { + timeout-ms = ; + key-positions = <1 2>; + bindings = <&bootloader>; + }; + combo_bt_nxt { + timeout-ms = ; + key-positions = <1 4>; + bindings = <&bt BT_NXT>; + }; + }; + + sensors { + compatible = "zmk,keymap-sensors"; + sensors = <&encoder_1 &encoder_2>; + }; + + + keymap0: keymap { + compatible = "zmk,keymap"; + + default_layer { + label = "default layer"; + bindings = < + &bt BT_CLR &kp TAB &kp F5 &kp LC(LA(C)) &kp LG(D) + &rgb_ug RGB_TOG &kp ESC &kp KP_DIVIDE &kp KP_MULTIPLY &kp KP_MINUS + &rgb_ug RGB_EFF &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp KP_PLUS + &kp C_MUTE &kp KP_N4 &kp KP_N5 &kp KP_N6 &trans + &mo 1 &kp KP_N1 &kp KP_N2 &kp KP_N3 &kp KP_ENTER + &kp BSPC &kp KP_N0 &trans &kp KP_DOT &trans + >; + sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp PG_UP PG_DN>; + + }; + + fn_layer { + label = "fn layer"; + bindings = < + &trans &trans &trans &trans &trans + &trans &kp KP_NUM &trans &trans &trans + &trans &trans &trans &trans &trans + &bt BT_CLR &trans &trans &trans &trans + &trans &trans &trans &trans &trans + &kp DEL &trans &trans &trans &trans + >; + sensor-bindings = <&inc_dec_kp PG_UP PG_DN &inc_dec_kp C_VOL_UP C_VOL_DN>; + + }; + }; +}; \ No newline at end of file diff --git a/app/boards/shields/murphpad/murphpad.overlay b/app/boards/shields/murphpad/murphpad.overlay new file mode 100644 index 00000000..25bd10f9 --- /dev/null +++ b/app/boards/shields/murphpad/murphpad.overlay @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2021 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include + +/ { + chosen { + zmk,kscan = &kscan0; + }; + + kscan0: kscan { + compatible = "zmk,kscan-gpio-matrix"; + label = "KSCAN"; + + diode-direction = "col2row"; + row-gpios + = <&pro_micro 20 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro 16 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro 18 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro 19 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + ; + col-gpios + = <&pro_micro 9 GPIO_ACTIVE_HIGH> + , <&pro_micro 6 GPIO_ACTIVE_HIGH> + , <&pro_micro 5 GPIO_ACTIVE_HIGH> + , <&pro_micro 4 GPIO_ACTIVE_HIGH> + , <&pro_micro 10 GPIO_ACTIVE_HIGH> + ; + }; + + encoder_1: encoder_1 { + compatible = "alps,ec11"; + label = "Encoder 1"; + a-gpios = <&pro_micro 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + b-gpios = <&pro_micro 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + resolution = <4>; + status = "disabled"; + }; + + encoder_2: encoder_2 { + compatible = "alps,ec11"; + label = "Encoder 2"; + a-gpios = <&pro_micro 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + b-gpios = <&pro_micro 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + resolution = <4>; + status = "disabled"; + }; + +}; + +&pro_micro_i2c { + status = "okay"; + + oled: ssd1306@3c { + compatible = "solomon,ssd1306fb"; + reg = <0x3c>; + label = "DISPLAY"; + width = <128>; + height = <32>; + segment-offset = <0>; + page-offset = <0>; + display-offset = <0>; + multiplex-ratio = <31>; + segment-remap; + com-invdir; + com-sequential; + prechargep = <0x22>; + }; +}; diff --git a/app/boards/shields/murphpad/murphpad.zmk.yml b/app/boards/shields/murphpad/murphpad.zmk.yml new file mode 100644 index 00000000..2dda83d9 --- /dev/null +++ b/app/boards/shields/murphpad/murphpad.zmk.yml @@ -0,0 +1,12 @@ +file_format: "1" +id: murphpad +name: MurphPad +type: shield +url: https://mechwild.com/product/murphpad/ +requires: [pro_micro] +exposes: [i2c_oled] +features: + - keys + - display + - encoder + - underglow