ffcb904b66
Includes the Source (as an Eclipse project) and the Hardware files (including schematic, layout, gerbers, and bill of materials.) The firmware is extremely incomplete. At this point the DDS chips work (with controlled phase relationship), the LCD (with fast-ish SPI, scrolling, and GFX, modified from Adafruit's library), the encoder knob, and LED work. The ADC is capturing, but not in a usable way, but it's enough to feed the DSP code and see a nice pretty waterfall. Timers, interrupts, and DACs are not working yet.
161 lines
6.5 KiB
C
161 lines
6.5 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_pwr_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.0
|
|
* @date 18-February-2014
|
|
* @brief Header file of PWR HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_PWR_EX_H
|
|
#define __STM32F4xx_HAL_PWR_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx
|
|
* @{
|
|
*/
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/* ------------- PWR registers bit address in the alias region ---------------*/
|
|
/* --- CR Register ---*/
|
|
|
|
/* Alias word address of ODEN bit */
|
|
#define ODEN_BitNumber 0x10
|
|
#define CR_ODEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4))
|
|
|
|
/* Alias word address of ODSWEN bit */
|
|
#define ODSWEN_BitNumber 0x11
|
|
#define CR_ODSWEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4))
|
|
|
|
|
|
/** @defgroup PWREx_Over_Under_Drive_Flag
|
|
* @{
|
|
*/
|
|
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
|
|
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
|
|
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/** @brief Macros to enable or disable the Over drive mode.
|
|
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
|
*/
|
|
#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
|
|
#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
|
|
|
|
/** @brief Macros to enable or disable the Over drive switching.
|
|
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
|
*/
|
|
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
|
|
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
|
|
|
|
/** @brief Macros to enable or disable the Under drive mode.
|
|
* @note This mode is enabled only with STOP low power mode.
|
|
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
|
* mode is only available when the main regulator or the low power regulator
|
|
* is in low voltage mode.
|
|
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
|
* exiting Stop mode.
|
|
* When the voltage regulator operates in Under-drive mode, an additional
|
|
* startup delay is induced when waking up from Stop mode.
|
|
*/
|
|
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
|
|
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
|
|
|
|
/** @brief Check PWR flag is set or not.
|
|
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
|
* is ready
|
|
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
|
* switching is ready
|
|
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
|
* is enabled in Stop mode
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clear the Under-Drive Ready flag.
|
|
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
|
*/
|
|
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
|
|
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
void HAL_PWREx_EnableFlashPowerDown(void);
|
|
void HAL_PWREx_DisableFlashPowerDown(void);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
HAL_StatusTypeDef HAL_PWREx_ActivateOverDrive(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DeactivateOverDrive(void);
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32F4xx_HAL_PWR_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|