280 lines
12 KiB
C
280 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_pwr_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.3
|
|
* @date 13-November-2015
|
|
* @brief Header file of PWR HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F7xx_HAL_PWR_EX_H
|
|
#define __STM32F7xx_HAL_PWR_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
|
* @{
|
|
*/
|
|
/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
|
|
* @{
|
|
*/
|
|
#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
|
|
#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
|
|
#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
|
|
#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
|
|
#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
|
|
#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
|
|
#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
|
|
#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
|
|
#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
|
|
#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
|
|
#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
|
|
#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
|
|
#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
|
|
#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
|
|
#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
|
|
#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
|
|
#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
|
|
#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
|
* @{
|
|
*/
|
|
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
|
|
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
|
* @{
|
|
*/
|
|
#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
|
|
#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
|
|
#define PWR_FLAG_UDRDY PWR_CSR1_UDSWRDY
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
|
|
* @{
|
|
*/
|
|
#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
|
|
#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
|
|
#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
|
|
#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
|
|
#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
|
|
#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
|
|
* @{
|
|
*/
|
|
/** @brief Macros to enable or disable the Over drive mode.
|
|
*/
|
|
#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
|
|
#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
|
|
|
|
/** @brief Macros to enable or disable the Over drive switching.
|
|
*/
|
|
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
|
|
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
|
|
|
|
/** @brief Macros to enable or disable the Under drive mode.
|
|
* @note This mode is enabled only with STOP low power mode.
|
|
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
|
* mode is only available when the main regulator or the low power regulator
|
|
* is in low voltage mode.
|
|
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
|
* exiting Stop mode.
|
|
* When the voltage regulator operates in Under-drive mode, an additional
|
|
* startup delay is induced when waking up from Stop mode.
|
|
*/
|
|
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
|
|
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
|
|
|
|
/** @brief Check PWR flag is set or not.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
|
* is ready
|
|
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
|
* switching is ready
|
|
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
|
* is enabled in Stop mode
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clear the Under-Drive Ready flag.
|
|
*/
|
|
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
|
|
|
|
/** @brief Check Wake Up flag is set or not.
|
|
* @param __WUFLAG__: specifies the Wake Up flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
|
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
|
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
|
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
|
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
|
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
|
*/
|
|
#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
|
|
|
|
/** @brief Clear the WakeUp pins flags.
|
|
* @param __WUFLAG__: specifies the Wake Up pin flag to clear.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
|
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
|
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
|
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
|
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
|
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
|
*/
|
|
#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
uint32_t HAL_PWREx_GetVoltageRange(void);
|
|
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
|
|
|
void HAL_PWREx_EnableFlashPowerDown(void);
|
|
void HAL_PWREx_DisableFlashPowerDown(void);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
|
|
|
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
|
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
|
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
|
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
|
|
|
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
|
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
|
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
|
#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN2) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN3) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN4) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN5) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN6) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
|
|
((__PIN__) == PWR_WAKEUP_PIN6_LOW))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32F7xx_HAL_PWR_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|