Michael Colton
fde421cc95
Backing up. Routing is looking good. Just planes and silkscreen to go!
2014-09-14 01:28:11 -06:00
Michael Colton
4c2ab407f5
Backing up. PSDR2 has reached the point where it could be produced and would work; all lines are routed and there are no clearance issues. I am cleaning up the layout now, need to do some planes, silkscreen, then I am DONE.
2014-09-13 17:48:18 -06:00
Michael Colton
9439b576fd
So tired. Time for bed. I'll finish it tomorrow.
2014-09-12 22:58:31 -06:00
Michael Colton
44e5663274
Backing up. All components placed and only a few routes left. Cleanup, and other finishing details will happen next. Almost there....
2014-09-12 17:03:20 -06:00
Michael Colton
4f7c43aa12
Except for the microcontroller, component placement and routing is complete. Now it is time to start doing that.....
2014-09-11 17:21:50 -06:00
Michael Colton
15efd49cde
Backing up. Routing is coming along very well. Getting close!
2014-09-11 12:31:40 -06:00
Michael Colton
2e3f852f88
Backing up. Cleaned up component placement a lot. Made moats around circuit blocks so there is room for vias. I also like the idea of the blocks being separated, maybe even labeled. I'll do it if I have room. Need to redo almost all of the routing, then I'll be ready to move the MCU into place and start hooking it up! Lots of work to do, but it's coming along very nicely :D.
2014-09-10 08:36:18 -06:00
Michael Colton
e488b26471
Backup.
2014-09-08 10:59:01 -06:00
Michael Colton
d110ec9f47
Started at about 900 unrouted traces, now I'm down to about 135. Not bad.
2014-09-08 00:05:49 -06:00
Michael Colton
96076b56d7
Preliminary component placement is basically complete. Saving as a backup.
2014-09-07 18:24:50 -06:00
Michael Colton
f8ec3099b8
More progress. Just committing as a backup.
2014-09-06 22:13:56 -06:00
Michael Colton
6c9d585c8a
More progress on PSDR2. Schematic is basically complete (at least, all the components and blocks are in, though some connections between blocks and to the MCU are not in there yet.) Also started layout. Location sensitive components have been placed. It's going to be so cool!
2014-09-06 19:14:59 -06:00
Michael Colton
35471a65ae
More progress.
2014-09-04 23:47:07 -06:00
Michael Colton
74701857e6
Tones of progress on the schematic. I'm getting close!
2014-09-04 21:45:42 -06:00
Michael Colton
e687ec676e
More schematic progress. The VNA stuff is mostly done!
2014-09-03 00:54:19 -06:00
Michael Colton
ef6f52ecf5
Saving progress. Nothing to see here. Updates to schematic and BOM.
2014-09-02 19:59:51 -06:00
Michael Colton
205924c170
Mostly just a commit so I have a back up of my work. Continued progress on next revision of hardware.
2014-09-01 00:29:55 -06:00
Michael Colton
3d31149c20
Looking at adding PJRC optimized display code to the PSDR. But his chip is rather different (no hardware FIFO) so I'll need to implement the changes with DMA I think, I'm sure it will work well, but it's going to be some work.... Update to block diagram. Also, finally getting to work on next rev of hardware!!
2014-08-23 14:08:17 -06:00
Michael Colton
03b0cfa0d4
Has the beginnings of an S-Meter. Audio seems worse than before that was added, so I want to check on that. Uploading the image files (even though the PSDR uses them in code form... still, might be handy)
2014-08-22 00:23:39 -06:00
Michael Colton
8fb32eede3
Added block diagram in a few formats. This is for the complete design, hopefully most/all of this will make it in the next board revision. Look at all that stuff!!
2014-08-11 23:05:17 -06:00
Michael Colton
003beac9e3
Added basic volume control (not sure why I didn't do that a long time ago!) also a HackADayPrize logo, can't hurt, right? A few other small things.
2014-08-02 01:26:47 -06:00
Michael Colton
4d89e8ab01
Further improvements to the menu system. Now, rather than a red underline, the item itself turns red. Logic for updating runtime settings and updating the display is improved. Main() is streamlined. Looks rather nice, if I do say so myself.
...
Does seem a little slow sometimes. Not sure why it would be (not more than it was before, anyway) Also, if you move through menu items too fast, some of them stay highlighted incorrectly.
2014-07-26 23:20:58 -06:00
Michael Colton
7b8b1ac023
Starting to (slowly) make changes to the schematic for the next hardware version.
...
Making/made a lot of changes to the graphics and some to the menu system. Want to do a commit before I change too much more, incase I screw things up, you see. Graphics look much better!
2014-07-26 19:07:45 -06:00
Michael Colton
a9f466d396
Added some color bitmaps and some code to draw them (way prettier graphics, here we come!), fixed a minor bug in the mode selection menu.
2014-07-23 09:31:17 -06:00
Michael Colton
6a7b46d523
Huge improvement in display. It was basically a bug that made it so hard to read. Playing with an IF shift feature, and filtering and stuff. I think the overlap-discard is not quite right yet....
2014-07-22 22:55:50 -06:00
Michael Colton
9d045be4ce
Starting to implement overlap-discard in the DSP code. I think maybe I've gotten it working, with a pretty large improvement in audio, but reception was so bad I had a hard time finding things to listen to to test it with. Also added the ability to switch mode (LSB & AM).
2014-07-21 08:50:38 -06:00
Michael Colton
50fbaf3920
The beginnings of AM demodulation. I think it works, but it doesn't sound good at all (then again, SSB leaves something to be desired as well.) Graphical display of filter (nice!) Doesn't crash if you set the FFT size to 1024.
2014-07-15 00:15:39 -06:00
Michael Colton
31de146601
The main thing here is moving the FFT/Filtering/IFFT to a timer interrupt that has a lower priority than the audio capture/playback timer interrupt. This way I don't care how slow the display code runs in the main loop (for now) enabling me to have the audio processing and the display working at the same time.
2014-07-14 01:41:46 -06:00
Michael Colton
71b87a38d7
Added a crude Automatic Gain Control (AGC) that's happening on the audio output side. I want to add one for the RF side as well, but I'll need to change the hardware to do it.
...
Also fixed some weirdness with the filter menu items.
Verified that the recent changes to applyCoefficients() function are good and necessary to the proper operation of the filter.
2014-07-08 09:56:47 -06:00
Michael Colton
28ebb2009f
Menu system is improved. Arbitrary filter control is working pretty well. You can set the upper and lower bounds of the filter and that's pretty neat! Strange to say, but this radio now beats my Yaesu FT-817 for filter performance (by a whole lot).
2014-07-06 23:41:57 -06:00
Michael Colton
7b1da77c21
Haven't committed in a while :o . Currently waterfall is disabled while I work on audio processing. I am capturing, FFT, filter, IFFT, and output. It seems to be working partly. I don't think I am doing things right yet.
...
Also, starting to implement the menu system. Oh, and fixed some indentation, so it looks like there was more changed to main() than there really was....
2014-07-06 21:20:00 -06:00
Michael Colton
8c308e12c0
Got a timer up and going, and it's firing interrupts! Next up is to change the audio capture to use the interrupt and some buffers. Basically separate the display loop stuff.
2014-06-23 00:00:31 -06:00
MichaelRColton
54c72734a0
Create README.md
2014-06-22 19:35:57 -06:00
Michael Colton
01feff0bd3
Added PDF of schematic, and moved the gerbers a little.
2014-06-22 17:59:36 -06:00
Michael Colton
ffcb904b66
Initial commit to GitHub.
...
Includes the Source (as an Eclipse project) and the Hardware files (including schematic, layout, gerbers, and bill of materials.)
The firmware is extremely incomplete. At this point the DDS chips work (with controlled phase relationship), the LCD (with fast-ish SPI, scrolling, and GFX, modified from Adafruit's library), the encoder knob, and LED work.
The ADC is capturing, but not in a usable way, but it's enough to feed the DSP code and see a nice pretty waterfall. Timers, interrupts, and DACs are not working yet.
2014-06-22 17:49:43 -06:00