Merge pull request #12 from jeffersonbenson/PSDR_Rebuild

Added Contributing and License, reorganized Hardware

CONTRIBUTING.md

@@ -0,0 +1,30 @@
+# Contributing to the Project
+There is obviously a lot of work required to get this project off the ground, and get the PortableSDR into as many hands as want it. In order to help coordinate every hand that wants to help develop the projcet, here are a few guidelines we ask the community to follow.
+
+Note: It is not necessary to be a licensed ham operator in order to work on this project, but it is highly encouraged that contributors contact their local ham radio club for assistance in obtaining a license to transmit. 
+
+Another Note: All pull requests and branches shall written in a professional and friendly manner. This extends to any discussion within a PR or branch. No attitudes on the airwaves!
+
+## How to Contribute
+
+Glad you asked! There are always ways for individuals to contribute with developing, testing, and planning new features for the project. 
+
+Here are some helpful resources:
+- For discussion of features, use the Discussions tab in Github
+- Bugs? Report them in the `Issues` tab
+
+## Testing
+  For hardware testing, you may need to order a board and populate it with the BOM. Two places to order PCBs that come to mind are [OSHPark](oshpark.com) and [PCB:NG](pcb.ng), though PCB:NG might be better for a production run scenario instead of just test boards.
+
+  For software testing, refer to the build instructions found in the `Documentation` folder for how to run smoke testing on code. Soon there will also be an automated testing route that contributors can take advantage of using the GitHub `Actions` section.
+
+## Submitting Changes
+Please submit a GitHub Pull Request along with a clear list of what changes you have made.Additionally, if your PR is related to a particular project task, please reference that task so appropriate tracking can be done. 
+
+If possible, please submit a few sentences regarding larger commits. One-line messages are fine for smaller changes, but bigger changes should be formatted as follows:
+```bash
+    $ git commit -m "A brief summary of the commit" -m "A paragraph describing what changed and its impact."
+```
+
+## Coding Conventions
+TBD

LICENSE.md

@@ -0,0 +1 @@
+TODO: Determine the best license for this project

README.md

@@ -2,46 +2,38 @@ PSDR
 ====
 
 PortableSDR - A Stand Alone HF Software Defined Transciever.
+[Hackaday.io Link](https://hackaday.io/project/1538-portablesdr)
 
+The PortableSDR is an all-in-one solution for ham operators, hikers, backpackers, and DIY enthusiasts who are looking for an open-source QRP (low-power) radio for communication. It is a fully stand-alone HF/Shortwave Software Defined Radio (SDR) Transceiver and includes a Vector Network Analyzer and Antenna Analyzer as well as GPS, perfect for portable operations in a variety of conditions. It is designed to be a flexible platform for development, a learning aid, and and a useful instrument for electronics enthusiasts.
 
+## Features
 
-Firmware Build Notes
+- Coverage from 0 to 35MHz
-====================
+- Waterfall display that lets you see radio signals
+- Receives AM, USB (Upper Side Band), LSB (Lower Side Band), and Morse code (CW)
+- Modulates USB and LSB signals
+- Variable bandpass filter
 
-* Install gcc-arm-none-eabi: apt-get install gcc-arm-none-eabi, or download from https://launchpad.net/gcc-arm-embedded/4.7
+## Hardware
-* Download Eclipse Kepler, v4.3 for C/C++ dev from https://eclipse.org/downloads/packages/release/Kepler/SR2
-* Help -> Install New software
-* add Name: GNU ARM, Location: http://gnuarmeclipse.sourceforge.net/updates
-* Click the radio button, and hit next, next, agree to the license, finsh, Hit OK to allow unsigned contents
-* Restart eclipse
-* Help -> Install New Software
-* same as before,add: Name: Zylin Embedded CDT, Location: http://opensource.zylin.com/zylincdt 
-* sudo apt-get install openocd
-* File -> import -> Existing Projects into Workspace (May be a better way here!)
-* Navigate to the PSDR/Source directory and add it.
-* hit Build All
 
-You should end up with PSDR/Source/Debug/PSDR.elf  which is the binary firmware file
+- Powerful ARM processor
+- Color LCD display
+- Dual DDS frequency Synthesizers
+- Quadrature Sampling Detector & Exciter
+- Digitally controllable instrumentation amplifiers
+- Morse Code key (the "Giblet" on the bottom right corner of the enclosure)
+- Magnitude & Phase measurement chip (for VNA and antenna analysis functions) with Impedance Bridge
+- Dual SMA connectors, smartphone style earphone/microphone connector, and USB port
+- GPS
+- Built in Microphone and Speaker
+- Internal Lithium Polymer battery with charger and high efficiency switching regulator
+- MicroSD slot
+- Pads for grabbing raw I/Q signals, both in and out.
 
-TODO: Flashing firmware to the PSDR instructions
+## Why did I make it?
+I'm an avid backpacker and radio enthusiast. To me there is something exciting about making contact with others from remote locations where cell phones and the internet can't reach. I wanted an advanced radio that was ideally suited to tough environments. That meant I it needed to be very compact, integrated, and durable. As an engineer, I wanted an open platform that really takes advantage of the hardware and has the potential to grow and be used for other applications.
 
+There are numerous, excellent radios out there, but none offered the combination I wanted. The best radios are closed source, larger, and expensive, while most open designs are very basic and lacking in flexibility.
 
-
+## Contributing
-
+Please read our [Contributing.md](CONTRIBUTING.md) for ways to help keep this project going.
-
-New Architecture Build Instructions (WIP):
-
-Windows:
-1. Install the GNU Tools ARM Embedded. Add bin (not arm-none-eabi/bin) to path?
-2. Navigate to firmware directory in shell and execute: make
-3. Use whatever editor you want for the files
-
-For eclipse:
-1. File->New->Project...
-2. C/C++->Makefule Project with Existing Code, "Next"
-3. Browse to the root directory of the PSDR firmware
-4. I have been selecting "Cross ARM GCC" not sure if that's needed. "Next"
-5. Right click on the project in the Project Explorer and select settings. In C/C++ Build, uncheck "Use default build command" and type "make" (or "make VERBOSE=1") without the quotes. Clock "OK"
-6. Try to build the project: CTRL-B or Project Menu->Build-All or right click on the project->Build Project
-7. TODO: Set up debugging. Fix all the error messages that come up.
-For some reason this doesn't work for me unless I build it at least once from the command line. Also, if I do a make clean, I have to build from the command line. More to learn!

Source/Firmware_Build_Notes.md

@@ -0,0 +1,36 @@
+Firmware Build Notes
+====================
+
+* Install gcc-arm-none-eabi: apt-get install gcc-arm-none-eabi, or download from https://launchpad.net/gcc-arm-embedded/4.7
+* Download Eclipse Kepler, v4.3 for C/C++ dev from https://eclipse.org/downloads/packages/release/Kepler/SR2
+* Help -> Install New software
+* add Name: GNU ARM, Location: http://gnuarmeclipse.sourceforge.net/updates
+* Click the radio button, and hit next, next, agree to the license, finsh, Hit OK to allow unsigned contents
+* Restart eclipse
+* Help -> Install New Software
+* same as before,add: Name: Zylin Embedded CDT, Location: http://opensource.zylin.com/zylincdt 
+* sudo apt-get install openocd
+* File -> import -> Existing Projects into Workspace (May be a better way here!)
+* Navigate to the PSDR/Source directory and add it.
+* hit Build All
+
+You should end up with PSDR/Source/Debug/PSDR.elf  which is the binary firmware file
+
+TODO: Flashing firmware to the PSDR instructions
+
+New Architecture Build Instructions (WIP):
+
+Windows:
+1. Install the GNU Tools ARM Embedded. Add bin (not arm-none-eabi/bin) to path?
+2. Navigate to firmware directory in shell and execute: make
+3. Use whatever editor you want for the files
+
+For eclipse:
+1. File->New->Project...
+2. C/C++->Makefule Project with Existing Code, "Next"
+3. Browse to the root directory of the PSDR firmware
+4. I have been selecting "Cross ARM GCC" not sure if that's needed. "Next"
+5. Right click on the project in the Project Explorer and select settings. In C/C++ Build, uncheck "Use default build command" and type "make" (or "make VERBOSE=1") without the quotes. Clock "OK"
+6. Try to build the project: CTRL-B or Project Menu->Build-All or right click on the project->Build Project
+7. TODO: Set up debugging. Fix all the error messages that come up.
+For some reason this doesn't work for me unless I build it at least once from the command line. Also, if I do a make clean, I have to build from the command line. More to learn!